TX532 - Video projector OPTOMA - Free user manual and instructions
Find the device manual for free TX532 OPTOMA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Video Projector |
| Model | TX532 |
| Brand | Optoma |
| Display Technology | Single 0.55" DLP Chip |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3200 ANSI Lumens |
| Contrast Ratio | 15000:1 |
| Aspect Ratio | 4:3 (Native), 16:9 Compatible |
| Lens | F/2.41 - 2.53, f = 21.85 - 24.00 mm, 1.1x Manual Zoom |
| Lamp Type | 190W P-VIP |
| Lamp Life | 4000 Hours (Standard Mode), 6000 Hours (Eco Mode) |
| Inputs | 1x VGA, 1x Composite Video, 1x S-Video, 1x HDMI, 1x Audio (3.5mm) |
| Outputs | 1x VGA Monitor Out, 1x Audio (3.5mm) |
| Other Ports | 1x USB (Service Only), 1x RS-232C |
| Keystone Correction | ±40° Vertical |
| Projection Distance | 1.2 - 12 m |
| Projection Screen Size | 0.76 - 7.62 m (30 - 300 inches diagonal) |
| Dimensions (W x D x H) | 324 x 234 x 97 mm (12.8 x 9.2 x 3.8 inches) |
| Weight | 2.5 kg (5.5 lbs) |
| Power Consumption | 225W (Standard), <1W (Standby) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Noise Level | 30 dB (Eco Mode) |
| Built-in Speaker | 1x 2W Mono |
| Warranty | 2 Years (Lamp 90 Days or 1000 Hours) |
Frequently Asked Questions - TX532 OPTOMA
How do I turn on the Optoma TX532 projector?
Press the Power button on the projector or remote control. Wait for the lamp to warm up, indicated by a steady green LED.
What is the lamp life of the TX532 and how can I extend it?
The lamp life is 4000 hours in standard mode and 6000 hours in Eco Mode. To extend lamp life, use Eco Mode, ensure proper ventilation, and avoid frequent power cycling.
How do I clean the projector's air filter?
Turn off the projector and unplug it. Remove the filter cover, gently clean the filter with a vacuum cleaner or replace it. Do not use water. Clean every 100 hours of use.
Can I connect my laptop to the TX532?
Yes, use a VGA or HDMI cable. Connect one end to your laptop and the other to the corresponding input on the projector. Then select the correct input source via the remote or menu.
What is the native resolution of the TX532?
The native resolution is XGA (1024 x 768). It can accept higher resolutions but will downscale them.
How do I adjust the keystone correction?
Press the Keystone button on the remote or navigate to the menu. Use the arrow keys to correct vertical distortion (up to ±40°).
Why is the projector not turning on?
Check if the power cord is firmly connected and the outlet is working. Ensure the lamp cover is properly closed. If the LED indicator blinks red, refer to the user manual for error codes.
How do I replace the lamp on the TX532?
Turn off the projector and unplug it. Wait 30 minutes for cooling. Open the lamp cover, unscrew the old lamp module, and insert the new one (e.g., Optoma SP.8A01.001). Reset the lamp timer via the menu.
Can I use the projector with a gaming console?
Yes, connect via HDMI to the projector. The TX532 supports standard video signals, but input lag may be higher than modern projectors. Use game mode if available in settings.
How do I perform a factory reset on the TX532?
Go to the Settings menu, select Factory Reset, and confirm. This restores all settings to default, including language and display parameters.
User questions about TX532 OPTOMA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual TX532 - OPTOMA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX532 by OPTOMA.