Cp-S318 - Video projector HITACHI - Free user manual and instructions
Find the device manual for free Cp-S318 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Brand | Hitachi |
| Model | CP-S318 |
| Display Technology | LCD |
| Resolution | SVGA (800 x 600) |
| Brightness | 2000 ANSI Lumens |
| Contrast Ratio | 500:1 |
| Aspect Ratio | 4:3 |
| Lamp Type | UHP |
| Lamp Life | 2000 hours (Standard) / 3000 hours (Eco) |
| Zoom | Manual, 1.2x |
| Focus | Manual |
| Keystone Correction | Vertical ±30° |
| Inputs | VGA, Composite Video, S-Video, Audio |
| Outputs | VGA (Monitor Out), Audio |
| Built-in Speaker | 1W Mono |
| Power Consumption | 250W |
| Weight | 2.8 kg |
| Dimensions (W x D x H) | 310 x 230 x 84 mm |
| Noise Level | 35 dB (Eco mode) |
| Remote Control | Included |
| Lamp Part Number | DT00621 |
Frequently Asked Questions - Cp-S318 HITACHI
How do I clean the air filter on my Hitachi CP-S318?
Turn off the projector and unplug it. Locate the air filter cover on the side, remove it, and gently vacuum the filter or wash it with mild soap if reusable. Ensure it is completely dry before reinstalling. Regular cleaning every 100 hours prevents overheating.
How do I replace the lamp?
Power off and disconnect the projector. Wait 30 minutes for the lamp to cool. Remove the lamp cover on the top, loosen the screws, and pull out the old lamp module. Insert the new lamp (part DT00621) and tighten screws. Reset the lamp timer via the menu Settings > Lamp Timer Reset.
How to connect a laptop to the projector?
Use a VGA cable to connect your laptop's VGA output to the projector's VGA input. Alternatively, use an adapter if your laptop only has HDMI. Select the corresponding input source by pressing Source on the remote or control panel.
Why won't the projector turn on?
Check if the power cord is securely connected and the outlet is working. Ensure the power switch (if any) is on. The projector may have a lamp cover interlock; make sure the lamp cover is fully closed. If the Temperature LED is flashing, it may be overheated – allow it to cool.
How do I adjust keystone correction?
Press the Keystone button on the remote or access the menu Display > Keystone. Use the arrow keys to adjust vertical keystone (up to ±30°) until the image is rectangular.
How do I change the input source?
Press the Source button on the remote control or the projector panel repeatedly to cycle through inputs: VGA, S-Video, Composite. The screen will display the active input.
What is the lamp life and how do I know when to replace it?
The lamp is rated for 2000 hours in standard mode and 3000 hours in eco mode. When the Lamp LED turns amber or a warning message appears, it is time to replace. The lamp timer can be checked in Menu > Information.
How do I reset the lamp timer after replacement?
After installing a new lamp, go to Menu > Settings and select Lamp Timer Reset. Confirm the reset by selecting Yes. This clears the previous lamp usage count.
Can I use the projector with a Mac?
Yes, if your Mac has a VGA output (older models) or use a compatible adapter (e.g., USB-C to VGA). Connect the cable, then select the correct input source on the projector.
How do I set up the projector for the first time?
Place the projector on a stable surface, connect the power cord, and attach any video source. Turn on the projector and the source. Use the Focus and Zoom rings to adjust image clarity and size. If the image is tilted, adjust keystone. Refer to the user manual for detailed menu settings.
User questions about Cp-S318 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual Cp-S318 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Cp-S318 by HITACHI.