P4SCT+II - Motherboard Supermicro - Free user manual and instructions
Find the device manual for free P4SCT+II Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motherboard |
| Brand | Supermicro |
| Model | P4SCT+II |
| Form Factor | ATX |
| CPU Socket | Socket 478 |
| Supported Processors | Intel Pentium 4 / Celeron |
| Chipset | Intel E7205 (Granite Bay) |
| Memory Type | DDR SDRAM |
| Max Memory | 4 GB (dual-channel) |
| Expansion Slots | 1x AGP 8x, 5x PCI |
| Storage Interfaces | 2x ATA-100, 2x Serial ATA (optional) |
| LAN | Dual Gigabit Ethernet (Intel) |
| Audio | AC'97 (optional) |
| USB | 4x USB 2.0 |
| Power Connector | ATX 20+4 pin, 4-pin +12V |
| BIOS | Phoenix BIOS with ACPI support |
| Dimensions | 12 x 9.6 inches (305 x 244 mm) |
| Weight | Approx. 1.2 kg |
| Operating Temperature | 0°C to 55°C |
| Compliance | RoHS, FCC, CE |
Frequently Asked Questions - P4SCT+II Supermicro
What type of CPU does the Supermicro P4SCT+II support?
The P4SCT+II supports Intel Pentium 4 and Celeron processors using Socket 478. For a list of tested models, refer to the CPU compatibility list on the Supermicro website.
Can I use DDR2 memory with this motherboard?
No, the P4SCT+II only supports DDR SDRAM (PC1600/PC2100/PC2700) in dual-channel configuration. Maximum capacity is 4 GB.
Does the P4SCT+II support SATA drives?
Yes, it features two Serial ATA 1.5 Gbps ports via an optional controller. It also has two parallel ATA-100 ports for legacy drives.
What is the maximum RAM supported?
The motherboard supports up to 4 GB of DDR RAM across four DIMM slots.
Can I install a graphics card with AGP 8x?
Yes, the motherboard has one AGP 8x slot. It is backward compatible with AGP 4x cards.
Does the board include onboard graphics?
No, the P4SCT+II does not have integrated graphics. A discrete AGP or PCI graphics card is required.
What power supply do I need?
A standard ATX power supply with 20+4 pin main connector and a 4-pin +12V (P4) connector is required. Minimum 350W recommended.
How do I clear the CMOS?
To clear CMOS, power off the system, remove the power cord, and move jumper JP3 from pins 1-2 to 2-3 for 10 seconds, then return to 1-2. Alternatively, remove the battery for 30 seconds.
The board has two LAN ports; can I use them as a team?
Yes, the dual Intel Gigabit Ethernet controllers support teaming (bonding) for load balancing or failover, configurable in the driver software.
Where can I download the manual and drivers?
The user manual and drivers are available on the Supermicro support page under the product page for P4SCT+II. You can also find them on notice-facile.com.
User questions about P4SCT+II Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motherboard in PDF format for free! Find your manual P4SCT+II - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. P4SCT+II by Supermicro.