M5300-PM - Power Strip Panamax - Free user manual and instructions

Type	Power Strip
Brand	Panamax
Model	M5300-PM
Number of Outlets	8
Surge Protection	Yes
Joules Rating	1500 J
Cord Length	6 ft (1.8 m)
Maximum Load	15 A / 1800 W
Input Voltage	120 V AC
Frequency	60 Hz
Dimensions (L x W x H)	12 x 3 x 1.5 in (30 x 7.6 x 3.8 cm)
Weight	1.2 lbs (0.54 kg)
LED Indicator	Power and protection status
Warranty	Limited Lifetime
Material	Fire-resistant plastic
Mounting	Keyhole slots for wall mounting
Safety Certifications	UL, cUL, ETL
Cleaning Instructions	Wipe with dry cloth; do not use liquids

Frequently Asked Questions - M5300-PM Panamax

How many outlets does the Panamax M5300-PM have?

The Panamax M5300-PM power strip has 8 outlets.

Does the M5300-PM include surge protection?

Yes, it features built-in surge protection with a rating of 1500 Joules to safeguard your electronics.

What is the maximum load capacity of this power strip?

The maximum load is 15 Amps/1800 Watts at 120V.

Can I mount the M5300-PM to a wall?

Yes, it has keyhole slots on the back for easy wall mounting.

How long is the power cord?

The cord length is 6 feet (1.8 meters).

Is the power strip safe for use with printers or monitors?

Yes, it is designed for home entertainment and computer equipment, with surge protection and noise filtering.

Does the LED indicator show when protection is active?

The LED indicator lights up to confirm power and surge protection is functioning.

What should I do if the surge protection is compromised?

If the LED goes out, surge protection may be lost. Replace the power strip immediately to ensure continued protection.

Can I plug the M5300-PM into an extension cord?

It is not recommended. For best performance and safety, plug directly into a wall outlet.

How do I clean the power strip?

Unplug it and wipe with a dry, soft cloth. Do not use water or cleaning solutions.

USER MANUAL M5300-PM Panamax

Panamax Power Conditioner Limited Product Warranty

Panamax warrants to the purchaser of this Panamax audio/video component style power conditioner, for a period of three (3) years from the date of purchase, that the unit shall be free of defects in design, material or workmanship, and Panamax will repair or replace any defective unit. For product replacement see "NOTIFICATION" below.

CAUTION

Audio/Video, computer and/or telephone system installations can be very complex systems, consisting of many interconnected components.

Due to the nature of electricity and surges, a single protector may not be able to completely protect complex installations. In those cases, a systemic approach using multiple protectors must be employed. Systemic protection requires professional design. AC power, satellite cables, CATV cables, telephone/network lines or any other signal lines entering the system that do not pass through this surge protector may render the Panamax Connected Equipment Protection Policy null and void. For additional information on how to protect your system, please contact Panamax before connecting your equipment to the surge protector.

WARNING NOTICE

Panamax products purchased through the Internet do not carry a valid Product Warranty or Connected Equipment Protection Policy unless purchased from an Authorized Panamax Internet Dealer and the original factory serial numbers are intact (they must not have been removed, defaced or replaced in any way). Authorized Panamax Internet Dealers have sufficient expertise to insure warranty compliant installations. For a list of Authorized Panamax Internet Dealers go to www.panamax.com

More detailed information is available at

www.panamax.com

If you have any questions regarding these requirements, please contact Panamax Customer Relations

Panamax Power Conditioner Limited Connected Equipment Protection Policy

Valid only in the United States and Canada.

It is the policy of Panamax that it will, at its election, either replace, pay to replace at fair market value, or pay to repair, up to the dollar amount specified below, equipment that is damaged by an AC power, cable, telephone, or lightning surge while connected to a properly installed Panamax power conditioner. Panamax must determine that the power conditioner shows signs of surge damage or is operating outside of design specifications, relative to its surge protection capability, and under all of the circumstances failed to protect your connected equipment.

M4300-PM: \$5,000,000 M5100-PM: \$5,000,000 M5300-PM: \$5,000,000 M5400-PM: \$5,000,000 M4300-EX: \$5,000,000 M5300-EX: \$5,000,000 M5510-Pro: \$5,000,000 M4310: \$5,000,000 M5400-EX: \$5,000,000 ML4200: \$5,000,000 M4400: \$5,000,000 M5410: \$5,000,000 M5100-EX: \$5,000,000 M5500-EX: \$5,000,000

THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS:

1. ORIGINAL OWNERSHIP REQUIREMENT:

Panamax's connected equipment policy extends to the original purchaser of the Panamax product only and is non-transferable. Original purchase receipts must accompany any product return or claim for connected equipment damage.

1. PROPER INSTALLATION: Panamax AC protectors must be directly plugged into a properly grounded 3-wire AC outlet. Extension cords*, non-grounded two prong adapters, or other non-Panamax surge products must not be used. Building wiring and other connections to protected equipment must conform to applicable codes (NEC or CEC). No other ground wires or ground connections may be used. All wires (including, e.g., AC power lines, telephone lines, signal/data lines, coaxial cable, antenna lead-ins) leading into the protected equipment must first pass through a single Panamax protector designed for the particular application. The protector and the equipment to be protected must be indoors in a dry

location, and in the same building. Panamax installation instructions and diagrams must be followed

1. NOTIFICATION: You must notify Panamax within ten days of any event precipitating request for product replacement or payment for connected equipment damage. A return authorization (RA) number must first be obtained from the RAN data. The RAN value is calculated using the www.panamax.com** before returning the protector Panamax. At this time, you must notify Panamax if you believe you have a claim for damaged connected equipment. Once you obtain an RA number, please mark the number on the bottom of the RAN data. If you need to switch box with enough packing material to protect it during transit. The RA number must also be clearly marked on the outside of the carton. Ship the unit Panamax. Please note that you are not required to keep your own shipping the unit to Panamax. If connected equipment damage was indicated on your RA request, Panamax will mail you claim kit to be completed and returned within 30 days. A connection diagram of your system will be required to provide details in the RAN data. This information is therefore figuration before disconnecting your equipment.

2. DETERMINATION OF FAILURE: Panamax will evaluate the protector for surge damage. The Panamax protector must show signs of surge damage or must be performing outside (+10%) of design specifications relative to its surge protection. The Panamax will also perform with a periphering with, or modifying the unit in any way shall be grounds for an automatic denial your request for payment. Panamax, after evaluating all information provided, shall determine whether or not your request is eligible for payment. If the protector is required, it may be a sign that the signal line surge damage and is working within design specifications. Panamax will return the unit to you with a letter explaining the test results and notifying you of the rejection your claim. Exceptions: If a dealer or installer replaces the protector, then it may have been returned to the dealer installer, or if the protector is a pre-1996 model, it will be replaced; or, for a Canadian customer, the protector will be replaced. Panamax reserves the right to inspect the damaged connected equipment, parts, or circums, which are not only known that you are not being charged by any and all charges. This is also showing the damaged equipment to Panamax. Panamax also

reserves the right to inspect the customer's facility. Damaged equipment deemed uneconomical to repair must remain available for inspection by Panamax until the claim is finalized.

1. REQUEST PAYMENTS: Once Panamax has determined that you are entitled to compensation, Panamax will, at its election, either pay you the present fair market value of the damaged equipment, or pay for the cost of the repair, or send you replacement equipment, or pay the equivalence of replacement equipment.

2. OTHER INSURANCE/WARRANTIES: This coverage is secondary to any existing manufacturer's warranty, implied or expressed, or any insurance and/or service contract that may cover the loss.

3. EXCLUSIONS: THE PANAMAX CONNECTED EQUIPMENT PROTECTION POLICY DOES NOT APPLY TO: Service charges, installation costs, reinstallation costs; setup cost; diagnostic charges; periodic checkups; routine maintenance; loss of use of the product; costs or expenses arising out of reprogramming or loss of programming and/or data; shipping charges or fees; service calls; loss or damage occasioned by fire, theft, flood, wind, accident, abuse or misuse, and products subject to manufacturer's recall or similar event.

4. DISPUTE RESOLUTION: Any controversy or claim arising out of or relating to Panamax's Connected Equipment Protection Policy, or the alleged breach thereof, shall be settled by arbitration administered by the American Association for the Arbitration and Arbitration Rules. You may file for arbitration at any AAA location in the United States upon the payment of the applicable filing fee. The arbitration will be conducted before a single arbitrator, and will be further extended to the parties' rights and rights of the party between you and Panamax. The arbitration shall be held in any mutually agreed upon location in person, by telephone, or online. Any decision rendered in such arbitration proceedings will be final and binding on each of the parties, and judged by the party's rights and rights of the party's equivalent jurisdiction. The arbitrator shall not award either party special, exemplary, consequential, punitive, incidental or indirect damages, or attorney's fees. The parties will share the costs of arbitration (including the arbitrator's fees, if any) and the party's actual award bears to an amount of the initial claim.

5. GENERAL: If you have any questions regarding the product warranty or the connected equipment protection warranty, please contact the Panamax Customer Relations Department at www.panamax.com. This warranty supersedes all previous warranties. THIS IS THE ONLY WARRANTY PROVIDED WITH THE PROTECTOR AND ANY OTHER IMPLIED OR EXPRESSED WARRANTIES ARE NON-EXISTENT.

This warranty may not be modified except in writing, signed by an officer of the Panamax Corporation.

* The use of a Panamax extension cord or equivalent (UL or CSA listed, minimum 14AWG, 3-wire grounded) will not invalidate the warranty

** Forms are available on the Panamax web site for requesting RMAs and opening a claim for connected equipment damage.

Effective Date 06/05 Q01L0049 Rev. A

Product Upgrade Program

Valid only in the United States and Canada If your Panamax power conditioner sacrifices itself while protecting your connected equipment, you have an option to upgrade to the latest technology. Please go to our web site www.panamax.com or contact Panamax Customer Relations at 800-472-5555 for details.

www.panamax.com

PANAMAX

www.panamax.com

Model: M5300-PM

Key Features

Linear Filtering Technology (LiFT)

For improving picture and sound quality nothing filters AC noise better. LiFT evenly eliminates noise across the entire bandwidth, ensuring peak audio and video performance by reducing harmonic distortion and improving the signal-to-noise ratio. With LiFT, you are assured consistent performance and the highest resolution from any audio or video playback system.

LiFT Technology EMI/RFI Noise Filtration :

Your audio/video components are constantly being bombarded by electromagnetic interference (EMI) and radio frequency interference (RFI) through their AC power source. This contaminated power can affect audio/video equipment and will degrade the overall performance of your entire system. Common symptoms of contaminated power include loss of picture detail, dull colors, pops, hisses, hums and visual artifacts.

Automatic Over & Under Voltage Protection (AVM):

Panamax's patent pending power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as momentary spikes or prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the M5300-PM senses an unsafe power condition, it will automatically disconnect your equipment from the power to protect equipment from damage. Once the voltage returns to a safe level, the M5300-PM will automatically reconnect the power.

- When subjected to a 6,000V (open circuit voltage) / 500A (short circuit current) surge, the M5300-PM limits its voltage output to less than 330V peak, UL's best rating.

- If the magnitude of the surge is greater than the capacity of the surge protection components, the M5300-PM's Protect or Disconnect Circuitry will disconnect your equipment in order to protect it. The M5300-PM will need to be repaired or replaced by Panamax if this occurs within the product's 3 year warranty.

5 Isolated Outlet Banks

The M5300-PM is designed to provide noise isolation between the outlet banks so that any noise created by A/V components plugged into the M5300-PM cannot contaminate the power going to equipment plugged into the other outlet banks of the M5300-PM.

Sequential Startup/Shutdown:

Complex audio/video systems may be susceptible to voltage transients generated internally at start-up/shutdown if all of the equipment is powered on or off at the same time. This can cause speaker "thumps" which are not only annoying but can also damage the speakers and/or trip product circuit breakers. The M5300-PM is designed to eliminate these transients by providing a "start-up" delay for the High-Current outlets and a "shutdown" delay for the Switched Outlet Banks. This minimizes in-rush current issues by allowing the components plugged into the Switched Outlet Banks to power-up and stabilize before any amplifiers and powered sub-wooters are turned on. This sequence is reversed during shutdown. The amplifiers and powered sub-wooters turn off, their power supplies drain, and then the equipment plugged into the Switched Outlet Banks are turned off.

USB Charger:

The M5300-PM features a front panel convenience charger for mp3 players, cell phones, video game controllers, and other small electronics. NOTE: Some devices may not be compatible with this USB charger.

Gaming LAN Port:

The M5300-PM features an easy-to-access LAN port pass-thru from the rear panel to the front panel. Perfect for online gaming.

Gaming Outlet:

The M5300-PM features a convenience outlet located on the front panel. Perfect for gaming systems and other electronics.

Voltage Sense Trigger: The MAX5300-PM voltage sense trigger input uses a standard 3.5mm (1/8") mini-mono plug.

This feature provides an ON/OFF trigger for the M5300-PM using a Direct Current voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the M5300-PM's switched outlets. When the source component is turned off, the voltage trigger signal is also turned off and the M5300-PM's shutdown sequence is initiated. An AC Adapter of the appropriate voltage plugged into a switched outlet may also be used if a DC trigger is not built in.

Cable/Satellite/Antenna TV signal

Coaxial protection circuits achieve optimum signal quality from our new coaxial protectors that have the smallest signal loss on the market - less than 0.5 db of attenuation from 0 MHz to 2.2 GHz. Our upgraded coaxial protection has been specifically designed to virtually eliminate signal loss. The clamping level of 75V will meet the demands of both cable and satellite voltage while minimizing exposure to damaging spikes and surges.

Telephone Line Protection:

Digital video recorders and satellite TV receivers require a telephone line connection for TV show scheduling and/or Pay-Per-View services. The MS300-PM provides surge protection for this utilizing one pair of RJ-11 telephone jacks is provided for this. The circuitry utilizes auto-resetting PTCRs and solidstate SIDACTors for reliability and unsurpassed protection. The clamping level of the MS300-PM's telephone protector is 260 volts. This will allow typical ring voltage (90-130VAC) and operating battery voltage (-48DC) to pass through the circuit and still protect the modem in your satellite receiver from damage.

LAN Protection:

Protection circuits for 10/100 baseT Ethernet lines. Incoming LAN line MUST be plugged into the LINE jack. Patch cord to the equipment MUST be plugged into the EQUIP jacks. 1 LAN jack goes to the front panel gaming port. 8 wire protection, 52V clamping.

PANAMAX

INS00816_E Rev. B 7/07

M5300-PM Front Panel Features

M5300-PM Back Panel Connection Features

M5300-PM Specifications

AC Power
Line Voltage:	120V, 60Hz
Total Current Capacity:	15 A
UL1449 Suppression Rating:	330V
Protection Modes:	L-N, L-G, N-G
Initial Clamping Level:	200V
Energy Dissipation:	2125 Joules
Peak Impulse Current:	72,000 Amps
Catastrophic Surge Circuit:	Yes
Thermal Fusing:	Yes

Over-voltage shutoff:	142 VAC ± 8 VAC
Under-voltage shutoff:	90 VAC ± 2 VAC

EMI/RFI Noise Filtration
Banks 1, 2, 3, 4......	80 db, 100 KHz - 2 MHz
Bank 5 High Current Outlets:......	60 db, 100 KHz - 2 MHz

DC Trigger Input
Jacks:	3.5mm (1/8") mono mini-plug
Voltage and Polarity:	3 - 24V DC, bidirectional
Current Requirement:	4.6 mA @3V, 58 mA @24V

DC Trigger Output

Pass through......no delay

Positive = Tip, Negative = Ring

LAN Circuits
Clamping Level:	52V
Jacks:	RJ-45
Wires Protected:	8-Wires

USB Circuit
Jacks	USB-A
Power Delivery	500 mA @ 5VDC

Telephone Circuit
Fuseless/Auto-resetting:	Yes
Clamping Level:	260V
Capacitance:	30pf (approx.)
Suppression Modes:	Metallic & Longitudinal
Jacks:	RJ-11
Wires Protected:	2-Wire, Pins 4 & 5

Cable and Satellite Circuits
HD 1080 i/p Ready	Yes
Bi-directional	Yes
Shielded	Yes
Clamping Level	75V
Frequency Range	0MHz - 2.2 GHz
Insertion Loss	< 0.5 dB
Connections	Female "F", Gold Plated

Specifications are subject to changes due to product upgrades and improvements.

Contents

One coaxial cable, 36 inches

One telephone patch cord 48 inches

One LAN cable (CAT-5) 48 inches

One Rack Mount Kit

Contacting Panamax

PANAMAX

Panamax
1690 Corporate Circle
Petaluma, CA 94954
Phone - 707-283-5900 or 800-472-5555
Fax - 707-283-5901
Web - www.panamax.com

Customer Relations 7:30 AM – 4:30 PM, M-F Email - [e-mail]

Product warranty (see page 4)

© 2007 Panamax, Inc. Panamax, MAX and the Panamax logo are registered US trademarks of Panamax. Protect or Disconnect and SignalPerfect are trademarks of Panamax, Inc. SIDACTor is a registered US trademark of Teccor Electronics, Inc. Foreign Language Version produced by International Contact, Inc.