HWM-T200N2 - Washing machine HAIER - Free user manual and instructions
Find the device manual for free HWM-T200N2 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Haier |
| Model | HWM-T200N2 |
| Load Capacity | 6.5 kg |
| Maximum Spin Speed | 800 rpm |
| Energy Class | A+ |
| Power Supply | 220-240 V, 50 Hz |
| Water Consumption (per cycle) | 49 Liters |
| Number of Programs | 10 |
| Dimensions (H x W x D) | 85 x 50 x 50 cm |
| Net Weight | 55 kg |
| Noise Level (Wash/Spin) | 59 dB / 73 dB |
| Type of Installation | Freestanding |
| Control Type | Electronic with LED Display |
| Drum Material | Stainless Steel |
| Child Lock | Yes |
| Overflow Protection | Yes |
| Maintenance | Clean lint filter monthly; descaler every 3 months |
| Spare Parts Availability | 7 years from discontinuation |
Frequently Asked Questions - HWM-T200N2 HAIER
How do I install the washing machine correctly?
Remove all transport bolts and packaging. Place the machine on a level surface. Connect the inlet hose to a cold water tap and the drain hose to a standpipe or sink. Ensure the electrical plug is grounded and the voltage matches 220-240V.
What should I do if the machine does not start?
Check that the door is fully closed and the power cord is plugged in. Ensure the water supply is turned on. If the display shows an error, note the code and consult the manual. Press Start/Pause again.
How do I clean the lint filter?
Open the filter cover at the bottom right. Pull out the filter and remove any lint. Rinse under running water and reinsert securely. Clean it at least once a month.
What is the maximum load capacity?
The maximum load is 6.5 kg for cotton and 3 kg for delicates. Overloading can affect wash performance and cause excessive vibration.
How do I use the delay start function?
Select the desired program and press the Delay Start button. Use the time adjuster to set the delay in hours (1-24). Press Start to activate. The cycle will begin after the set delay.
Why is my machine vibrating excessively?
Ensure all transport bolts are removed. Check that the machine is level by adjusting the feet. Distribute laundry evenly inside the drum. Avoid washing heavy items like rugs alone.
How do I clean the detergent drawer?
Pull out the drawer completely. Press the release tab to remove the siphon cap. Rinse all parts with warm water and a soft brush. Reassemble and slide back in. Clean every 3 months.
What do error codes mean?
Common codes: E1 (water inlet issue), E2 (drainage problem), E4 (door lock failure). Refer to the manual for a full list. For persistent errors, contact Haier support.
Can I use liquid detergent?
Yes, but place liquid detergent in the designated compartment or use a dosing ball. Do not exceed the MAX line. For pre-wash, use powder only.
How do I enable the child lock?
Press and hold the Child Lock button for 3 seconds until the icon appears on the display. To disable, repeat the process. The lock prevents accidental button presses during operation.
User questions about HWM-T200N2 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual HWM-T200N2 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HWM-T200N2 by HAIER.