Freelancer 2760-ST1-20001 - Watch RAYMOND WEIL - Free user manual and instructions
Find the device manual for free Freelancer 2760-ST1-20001 RAYMOND WEIL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wristwatch |
| Brand | Raymond Weil |
| Model | Freelancer 2760-ST1-20001 |
| Case Material | Stainless Steel |
| Case Diameter | 42 mm |
| Case Thickness | 10.5 mm |
| Weight | Approximately 180 g |
| Movement Type | Automatic (self-winding) |
| Power Reserve | 38 hours |
| Crystal | Sapphire, scratch-resistant |
| Water Resistance | 10 ATM (100 meters) |
| Bracelet Material | Stainless Steel |
| Clasp Type | Folding clasp with push button |
| Functions | Hours, minutes, seconds, date |
| Special Features | Exhibition case back |
| Warranty | 2 years international |
| Care Instructions | Clean with soft cloth; avoid strong magnetic fields; service every 3-5 years |
| Security | Not applicable |
| Spare Parts & Repairability | Available through authorized dealers |
Frequently Asked Questions - Freelancer 2760-ST1-20001 RAYMOND WEIL
How do I manually wind the watch?
To manually wind the watch, unscrew the crown (if screw-down) to position 1 and turn it clockwise about 20-30 times. Do not overwind. The watch will then start running with a full power reserve.
How do I set the date?
Pull the crown to position 2 (midway). Turn the crown clockwise to adjust the date. For models with a quickset date, avoid setting between 9 PM and 3 AM to prevent damage to the date mechanism.
Is the watch water resistant?
Yes, the watch is water resistant to 100 meters (10 ATM). It is suitable for swimming and snorkeling, but not for scuba diving. Ensure the crown is pushed in or screwed down before water exposure.
How should I clean the watch?
Clean the watch with a soft, lint-free cloth. For the bracelet, use a mild soapy solution and a soft brush, then rinse with fresh water. Avoid using chemical cleaners or ultrasonic baths.
What type of movement does this watch use?
The Freelancer 2760-ST1-20001 is powered by an automatic movement (self-winding), typically a Raymond Weil caliber RW2010 or similar, with 26 jewels and a frequency of 28,800 vph.
What is the power reserve?
The power reserve is approximately 38 hours when fully wound. If the watch is not worn for a day, it may stop and require manual winding.
How do I adjust the bracelet length?
The stainless steel bracelet can be adjusted by removing links. Use a spring bar tool to push out the pins. Alternatively, visit an authorized dealer for professional resizing.
What should I do if the watch stops?
If the watch stops, first manually wind it (20-30 turns). If it still doesn't run, it may need servicing. Do not shake the watch excessively; contact an authorized service center.
Can I wear the watch while swimming?
Yes, the watch has 100m water resistance, so it is safe for swimming and snorkeling. However, avoid pressing the crown or buttons underwater. Rinse with fresh water after saltwater exposure.
Where can I get spare parts?
Spare parts such as crowns, crystals, and movements are available through authorized Raymond Weil dealers or service centers. Use only genuine parts to maintain warranty and performance.
User questions about Freelancer 2760-ST1-20001 RAYMOND WEIL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Watch in PDF format for free! Find your manual Freelancer 2760-ST1-20001 - RAYMOND WEIL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Freelancer 2760-ST1-20001 by RAYMOND WEIL.