What does error code E1 mean on the DIMPLEX CFH60 heater and how can it be resolved?

Question

Accepted Answer

The error code E1 on the DIMPLEX CFH60 heater generally indicates a problem related to temperature regulation or a malfunction of the temperature sensor. Here’s how to identify and resolve this issue:

Steps to resolve error code E1:

Restart the device: Turn off the heater, unplug it from the electrical outlet, wait a few minutes, then plug it back in and turn it on. This may reset the system and resolve a temporary error.
Check the ambient temperature: Ensure that the room where the heater is located is within the recommended temperature range for its operation. Temperatures that are too low or too high can trigger this error code.
Inspect the temperature sensor: If possible, check the sensor to ensure it is not dirty, damaged, or misaligned. A faulty sensor can lead to incorrect temperature readings and trigger the E1 code.

If after these checks the error code persists, it is advisable to contact a qualified professional for a more in-depth diagnosis or repair, as this may indicate an internal problem requiring technical intervention.

User manual DIMPLEX : user manuals and guides in PDF

Models DIMPLEX most viewed

Browse manuals DIMPLEX by appliance type

Recent questions about devices DIMPLEX