Q: How to properly install the batteries in the Celestron NexStar 127SLT telescope?

The Celestron NexStar 127SLT operates with 8 AA alkaline batteries (sold separately) or an optional 12V AC power adapter. Here’s how to properly install the batteries: Start by locating the battery compartment located under the base of the telescope. Press the two tabs on each side of the battery compartment cover while lifting it up to access the inside. Insert 8 AA batteries into the slots of the compartment , following the polarity indicated (+ and -) inside the casing. Make sure each battery fits securely into the designated slots and makes good contact with the metal springs. Replace the battery compartment cover and press down until you hear a clicking sound . This action securely locks the compartment. Finally, toggle the switch to the “ON” position located on the hand control. A light on the power button should illuminate, confirming that the telescope is properly powered and ready for use. If the light does not turn on, check that the batteries are new and correctly oriented, and that the compartment cover is securely locked. If in doubt, replace the batteries with new quality alkaline batteries.

Question 1

How to select a star during alignment on the Celestron NexStar 127SLT telescope when names are not displayed?

Accepted Answer

When aligning with the Celestron NexStar 127SLT telescope, it is normal for some celestial objects like the Moon to have a displayed name, while for stars, only predefined names of bright stars are offered in the list, but not always the common names you know.

Procedure to select a star during alignment:

Choose a visible star in the sky: Before starting, locate a bright and well-visible star. You can use a smartphone astronomy app to identify the stars present in your local sky.
Access the alignment menu: Turn on the telescope and in the main menu, choose the star alignment option.
Browse the list of proposed stars: The telescope displays a list of predefined stars, often the brightest and easiest to spot. Use the remote control arrows to navigate through this list.
Select the star closest to the one you spotted: Even if the exact name does not match what you expect, choose the star that corresponds to your spotting in the sky.
Center the star in the eyepiece: The telescope will point to the selected star. Manually adjust the position using the arrows to center the star in the field of view.
Confirm the alignment: Once the star is centered, validate to continue the alignment. You will generally need to repeat this operation with a second star to improve accuracy.

In summary, even if the exact name of the star is not displayed, you should select from the list the one that corresponds to your visual spotting. Using an astronomy app can greatly facilitate this step.

Question 2

What do the different alignment modes offered at the start of the Celestron NexStar 127SLT telescope mean?

Accepted Answer

At the start of the Celestron NexStar 127SLT telescope, you are prompted to select an alignment mode. This choice allows the telescope to calibrate itself so that it knows its precise position in the sky and can correctly point to celestial objects. Here is the meaning of the different alignment modes offered:

Star Alignment: classic method where you select a visible star in the sky for the telescope to locate itself. You must manually point to this star.
2-Star Alignment: you choose two distinct stars. This method offers increased accuracy by allowing the telescope to better calculate its position.
Auto Alignment: the telescope automatically detects bright stars to align itself without manual intervention, ideal for beginners or in case of difficulty identifying stars.
Celestial Alignment: method that uses known celestial position and coordinates to perform a more advanced alignment, often used by experienced users.
EG Alignment (East-Left): this mode takes into account the initial orientation of the telescope towards the East (left) for precise alignment based on direction.
South Alignment: you must orient the telescope towards the south before starting the alignment, which may be required for certain specific methods.

In summary, these options allow you to choose the alignment method that best suits your level of experience and observing conditions. For a beginner, auto alignment is often the simplest and quickest method.

Question 3

Can the Celestron NexStar 127SLT telescope align itself automatically without user intervention?

Accepted Answer

No, the Celestron NexStar 127SLT telescope cannot fully align itself automatically without user intervention. Although it is equipped with powerful motors and a computerized remote control, it absolutely requires a manual initial alignment phase to function correctly. This calibration step is essential for the telescope to determine its exact position in the sky.

The mandatory alignment procedure works as follows: once the telescope is turned on, the user presses the ALIGN button on the remote control and manually selects one, two, or three bright stars visible in the sky. The telescope then automatically points to these preselected celestial bodies, and the user must precisely adjust the aiming using the direction buttons to ensure the star is perfectly centered in the eyepiece. Without this active participation, the navigation system cannot establish the necessary reference points for its operation.

The NexStar 127SLT offers several alignment procedures, including two-star auto alignment, standard two-star alignment, one-star alignment, or solar system alignment. Regardless of the chosen method, the user must always intervene to select the celestial bodies and confirm their alignment in the eyepiece. The Celestron manual clearly states that this initial alignment requires active user participation to ensure the accuracy and effectiveness of the observation.

Once the initial alignment is completed (usually within a few minutes), the telescope becomes fully automated. It can then automatically position itself towards any object in its database of 40,000 celestial objects by simply pressing buttons, without requiring further intervention. The Sky Tour function can even automatically explore the best objects in the sky by continuously directing the telescope towards each of them. However, this complete automation remains contingent upon the prior completion of the initial manual calibration.

Question 4

How to use the remote control of the Celestron NexStar 127SLT telescope to automatically point to the Moon?

Accepted Answer

To automatically point your Celestron NexStar 127SLT telescope to the Moon using the remote control, follow these simple steps:

1. Turn on and prepare the telescope

Make sure the telescope is properly mounted and that the remote control batteries are installed and charged. Turn on the telescope by pressing the power button.

2. Perform the initial alignment

Before you can point to the Moon, it is necessary to align the telescope so that it knows its position in the sky. Follow the on-screen instructions of the remote control to perform the alignment, which generally involves selecting and centering two bright visible stars.

3. Select the Moon from the menu

Once the alignment is complete, access the main menu of the remote control. Navigate to the list of celestial objects, then select the category “Moon” or search directly for “Moon” in the database.

4. Automatically point to the Moon

After selecting the Moon, confirm your choice. The telescope will automatically move to orient itself towards the Moon. You can then manually adjust the position using the remote control arrows if necessary for precise framing.

5. Observe

Look through the eyepiece to admire the details of the lunar surface.

This procedure will allow you to fully enjoy your telescope and easily observe the Moon from the very first use.

Question 5

How to properly install the batteries in the Celestron NexStar 127SLT telescope?

Accepted Answer

The Celestron NexStar 127SLT operates with 8 AA alkaline batteries (sold separately) or an optional 12V AC power adapter. Here’s how to properly install the batteries:

Start by locating the battery compartment located under the base of the telescope. Press the two tabs on each side of the battery compartment cover while lifting it up to access the inside.

Insert 8 AA batteries into the slots of the compartment, following the polarity indicated (+ and -) inside the casing. Make sure each battery fits securely into the designated slots and makes good contact with the metal springs.

Replace the battery compartment cover and press down until you hear a clicking sound. This action securely locks the compartment.

Finally, toggle the switch to the “ON” position located on the hand control. A light on the power button should illuminate, confirming that the telescope is properly powered and ready for use. If the light does not turn on, check that the batteries are new and correctly oriented, and that the compartment cover is securely locked. If in doubt, replace the batteries with new quality alkaline batteries.

Question 6

What types of batteries can be used for the Celestron NexStar 127SLT telescope?

Accepted Answer

The Celestron NexStar 127SLT telescope is designed to operate with AA batteries. It is important to use this type of battery to ensure proper power supply and avoid any risk of damaging the device.

Here are some details regarding the power supply:

Recommended type: standard AA batteries or AA-sized rechargeable NiMH batteries.
Types to avoid: batteries of different sizes (such as type A batteries or other formats), batteries not compatible with the required voltage, or batteries not suitable for the electronic use of the telescope.
Tip: prefer quality batteries or rechargeable batteries for better usage duration and stable operation.

Using a different type of battery than AA may lead to malfunction or damage to the telescope's electronics. Therefore, it is recommended to adhere to this specification to ensure the longevity and performance of your NexStar 127SLT.

Question 7

What is the purpose of the battery box located under the Celestron NexStar 127SLT telescope?

Accepted Answer

The box located under the Celestron NexStar 127SLT telescope is designed to hold the batteries that power the device. Here is its detailed utility:

Function of the battery box

Standalone power: This box allows the telescope to operate without being plugged into an external power source, which is ideal for outdoor use or in locations without electricity.
Enhanced mobility: By using batteries, you can easily move the telescope without worrying about cables, simplifying its setup and use in the field.
Powering the computer system: The NexStar 127SLT telescope is equipped with a computer system for automatic star pointing, which requires a reliable power source provided by these batteries.

Usage tips

Ensure that the batteries are properly installed in the box before each use.
Use new or fully charged batteries to ensure optimal operation.
Replace the batteries as soon as the telescope shows signs of low power (system slowdown, unstable display, etc.).

User manual CELESTRON : user manuals and guides in PDF

Models CELESTRON most viewed

Browse manuals CELESTRON by appliance type

Recent questions about devices CELESTRON