Q: What to do if the microwave does not turn on?

Preliminary Checks Power Supply: Check that the microwave is properly plugged into a functional outlet. Test the outlet by plugging in another device (lamp, radio). If the outlet does not work, check the circuit breaker in the electrical panel and reset it if it is tripped. Power Cord: Inspect the power cord along its entire length for cracks, cuts, exposed wires, or damaged prongs. A damaged cord should not be used and needs to be replaced. Microwave Door: The microwave cannot start if the door is not completely closed. Ensure that the door closes properly with an audible click, and that the latches are not broken or loose. If the problem persists If the screen remains completely black and does not respond to any buttons, two internal components may be faulty: Door Switch: This switch signals to the microwave that the door is closed. If it is faulty, the appliance will not start. Ceramic Fuse: This component protects the appliance from electrical overloads. If it is blown, the internal power supply is cut off. Warning: For any internal intervention, always unplug the microwave from the outlet and discharge the capacitor to avoid dangerous electrocution. If you are not comfortable with these repairs, contact a qualified technician.

Question 1

Why does the microwave beep twice when I use the popcorn function?

Accepted Answer

When you press the Popcorn button and then Start on the Salton MW-2047 microwave, the 2 beeps you hear are normal audible confirmation signals from the microwave. They simply indicate that the device has successfully registered your command and that the popcorn function has been activated.

This is completely normal behavior and does not indicate a problem. These confirmation beeps are designed to assure you that your action has been acknowledged before cooking begins.

If cooking starts normally after the 2 beeps: everything is functioning correctly; it’s just the device confirming the start of the program.

If the microwave does not start after the beeps: check that the door is properly closed, as the microwave cannot cook if the door is not completely latched.

Question 2

The microwave has power but won't start cooking - what should I do?

Accepted Answer

If your Salton MW-2047 has power but refuses to start cooking, here are the checks to perform:

Check the door closure

The microwave can only start if the door is properly closed. Make sure that:

The door closes completely with a distinct, sharp click
The door hooks or latches (on each side) engage properly
No object is preventing complete closure

Check the cooking settings

Make sure you have programmed the device correctly:

Enter the desired cooking time (in minutes and seconds)
Select the power level, if there are options available
Press firmly on the START button after setting the parameters

Check the child lock

Check that the child lock function is not activated, as it would block the start. Refer to your manual instructions to disable this feature if necessary.

If the problem persists

If the door closes properly, the settings are correct, and the device still refuses to start, this may indicate an internal problem (faulty door switch, electronic component, etc.). In this case, the microwave would need professional repair.

Question 3

What to do if the microwave does not turn on?

Accepted Answer

Preliminary Checks

Power Supply: Check that the microwave is properly plugged into a functional outlet. Test the outlet by plugging in another device (lamp, radio). If the outlet does not work, check the circuit breaker in the electrical panel and reset it if it is tripped.

Power Cord: Inspect the power cord along its entire length for cracks, cuts, exposed wires, or damaged prongs. A damaged cord should not be used and needs to be replaced.

Microwave Door: The microwave cannot start if the door is not completely closed. Ensure that the door closes properly with an audible click, and that the latches are not broken or loose.

If the problem persists

If the screen remains completely black and does not respond to any buttons, two internal components may be faulty:

Door Switch: This switch signals to the microwave that the door is closed. If it is faulty, the appliance will not start.
Ceramic Fuse: This component protects the appliance from electrical overloads. If it is blown, the internal power supply is cut off.

Warning: For any internal intervention, always unplug the microwave from the outlet and discharge the capacitor to avoid dangerous electrocution. If you are not comfortable with these repairs, contact a qualified technician.

User manual Salton : user manuals and guides in PDF

Models Salton most viewed

Browse manuals Salton by appliance type

Recent questions about devices Salton