U5520B - Vidéo-projecteur ACER - Kostenlose Bedienungsanleitung

Produkttyp	Videoprojektor
Marke	Acer
Modell	U5520B
Herstellungsjahr	2015
Projektionstechnologie	DLP
Auflösung	XGA (1024 x 768)
Helligkeit	3000 ANSI Lumen
Kontrastverhältnis	20000:1
Lampenlebensdauer	5000 Stunden (Normalmodus)
Betriebsleistungsaufnahme	ca. 250 Watt
Standby-Leistungsaufnahme	0,29 Watt
Netzwerk-Standby-Leistungsaufnahme	2,63 Watt
Zeit bis zum Standby-Modus	120 Minuten
Anschlüsse	HDMI, VGA, USB, Audio, LAN
Abmessungen (ca.)	300 x 220 x 100 mm
Gewicht (ca.)	2,5 kg
Geräuschpegel	ca. 30 dB (Normalmodus)
Projektionsverhältnis	1.5 - 1.8 : 1
Kensington-Schloss	Ja
Staubfilter	Reinigbar
Lampentyp	UHP-Lampe
Spannungsversorgung	AC 100-240 V, 50/60 Hz

Häufig gestellte Fragen - U5520B ACER

Wie schließe ich den Projektor an einen Computer an?

Wie reinige ich den Luftfilter?

Wie kann ich die Projektionsgröße anpassen?

Was bedeutet die rote LED-Anzeige am Projektor?

Wie tausche ich die Lampe aus?

Warum schaltet sich der Projektor automatisch aus?

Kann ich den Projektor über LAN steuern?

Wie setze ich den Projektor auf die Werkseinstellungen zurück?

Welche Stromaufnahme hat der Projektor im Betrieb?

Wo finde ich die Seriennummer meines Projektors?

BEDIENUNGSANLEITUNG U5520B ACER

Technical Documentation of (EC) No 1275/2008

Product type Projector

Manufacturer name, address

Acer Italy s.r.l,

Via Lepetit, 40, 20020 Lainate (MI) Italy

Product model number U5520B

Year of manufacture 2015

Standby mode power consumption 0.29 Watt

Off mode power consumption Not applicable

Networked standby mode power consumption

2.63 Watt

Power consumption of the product in networked standby if all wired network

ports are connected and all wireless network ports are activated

Not applicable

For products with an display or light

source, the total content of mercury is

The default time after which the power

management function, or similar function, has switched the equipment into standby mode

120 minutes

The default time after which the power

management function, or similar function, has switched the equipment into off mode

The default time after which the power

management function, or similar function, has switched the equipment into another

condition which does not exceed the applicable power consumption

requirements for off mode and/or standby mode when the equipment is connected to the mains power source.

The default time after which the power management function, or similar function, has switched the equipment into

networked standby mode

Technical justification that the

requirements set out in points 2(c) and/or 2(d) and/or 3(b), are inappropriate for the

intended use of equipment

Not applicable

Measurement methodology for standby

120 minutes

Measurement methodology for off mode EN

15 minutes

Not applicable

EN 50564:2011/IEC 62301:2011

N 50564:2011/IEC 62301:2011

Measurement methodology for networked standby mode	EN 50564:2011/IEC 62301:2011
Description of how standby mode was selected or programmed	The equipment is connected to the mains power source without no wake up power key of projector and LED indicative lamp show red light.
Description of how off mode was selected or programmed	Not applicable
Sequence of steps for achieving a stable condition with respect to power demand	Power measurement result averaged from 600 reading result per 1 sec. within 10 minutes, compliance with specification limit are evaluated using exact values without any benefit from further rounding.
Sequence of events leading to the condition where the equipment automatically changes to standby mode	The projector into Sleep mode by receiving a signal from computer, and also can be wake up from sleep mode by receiving a signal from computer.
Sequence of events leading to the condition where the equipment automatically changes to off mode	Not applicable
Sequence of events leading to the condition where the equipment automatically changes to networked standby mode	The projector into networked standby mode by receiving a signal from computer and lan , and also can be wake up from networked standby mode by receiving a signal from computer.