Urban Access - Nicht kategorisiert Think Tank - Kostenlose Bedienungsanleitung

BEDIENUNGSANLEITUNG Urban Access Think Tank

Urban Access Backpack – Product Instructions

For more information please visit: www.thinktankphoto.com

TRIPOD ATTACHMENT

Close-up of a hand adjusting a zipper with a white arrow pointing to the zipper (no text or symbols visible)

Step 1: Deploy tripod straps from side pockets.

Close-up of a person's arm holding a black backpack with a white arrow pointing to it, no visible text or symbols.

Step 2: Deploy tripod cup and strap from bottom pocket.

Close-up of a backpack with patterned straps and a zipper, no visible text or symbols

Step 3: Place 2–3 feet in the tripod cup and secure strap. Secure top strap around the tripod head.

Close-up of a mechanical device with metallic components and connectors (no visible text or symbols)

If the tripod moves from left to right, wrap the strap one full rotation around the tripod and secure.

SECURE SHOOTING POSITION WAISTBELT REMOVAL WAISTBELT RE-ATTACHMENT

Man wearing a camera strap and vest, handling equipment (no visible text or symbols)

Loosen a shoulder on either side and drape the bag around your neck like a necklace.

Close-up of a person's torso wearing a black athletic vest with mesh cushion, showing a hand adjusting the seat area (no text or symbols visible)

Release hook/loop behind lumbar padding and pull out waistbelt.

Close-up of a person's torso wearing a black athletic vest, with a hand adjusting the seat area (no text or symbols visible)

Align and secure "hook" on waistbelt with "loop" behind lumbar padding.

Urban Access Backpack Instructions

For more information please visit: www.thinktankphoto.com

PASS-THROUGH DIVIDER LAYOUT To enable access from both side openings, position the dividers using the following steps:

Cross-sectional view of a mechanical assembly showing internal components and a labeled section 'REAR OPENING' (no other text or symbols visible)

SIDE OPENING

Step 1: Position both reinforced dividers so that they span horizontally across the bag. Be sure to leave enough room for your largest lens.

Close-up of hands fastening a zipper on a car seatbelt (no text or symbols visible)

Step 2: On the non-hinged side, feed the fabric tab through the closest webbing loop.

Close-up of hands adjusting a fabric or leather piece with visible stitching (no text or symbols)

Step 3: Re-attach the fabric tab to the reinforced divider.

Close-up of a hand adjusting a camera lens on a textured surface (no visible text or symbols)

Step 4: On the hinged side use the same technique as listed above. Be sure to use the shorter fabric tab and not the tab with the additional wing.

HINGED DIVIDER LAYOUT To position one side opening with a hinge to support your camera body, follow these steps:

Interior view of a mechanical assembly with a cylindrical component and housing (no visible text or symbols)

Close-up of a DSLR camera with visible lens and screen, labeled 'SIDE OPENING' on the left (no other text or symbols)

Step 1: Position both reinforced dividers so that they span horizontally across the bag. Be sure to leave enough room for your largest lens..

Close-up of hands adjusting a zipper on a bag (no visible text or symbols)

Step 2: On the hinged side, position the hinge to the desired position. Feed the longer fabric tab, with additional wing, through the closest webbing loop.

Close-up of hands adjusting a textured fabric piece (no visible text or symbols)

Step 3: Re-attach the fabric tab to the reinforced wing.

We warranty our products against manufacturing defects.

©2019 THINK TANK PHOTO PINOCOa