Clip Tube - Kamera EASYPIX - Kostenlose Bedienungsanleitung

Produkttyp	Digitalkamera (Foto und Video)
Marke	Easypix
Modell	Clip Tube
Sensor	5.0 Megapixel CMOS
Fotoauflösung	Bis zu 12 MP (interpoliert)
Videoauflösung	VGA (640x480), QVGA (320x240)
Objektiv	F/2.8, Brennweite 5 mm
Fokusbereich (Normal)	0,5 m bis unendlich
Makrobereich	11 cm - 18 cm
Digitalzoom	8-fach
Display	2,0 Zoll LTPS TFT-Farbdisplay
Interner Speicher	64 MB Flash
Externer Speicher	SD-Karte bis 8 GB
Dateiformate	JPEG (Foto), AVI (Video)
Weißabgleich	Auto, Tageslicht, Bewölkt, Kunstlicht, Leuchtstoff
Selbstauslöser	2 s, 10 s, 10+2 s
PC-Anschluss	USB 1.1
TV-Ausgang	NTSC/PAL
Stromversorgung	2x AA-Alkalibatterien
Bildqualitätseinstellungen	Fein, Standard, Economy
Szenenmodi	Auto, Sport, Landschaft
Belichtungskorrektur	-2 bis +2 EV
ISO-Empfindlichkeit	Auto, 100, 200
Farbeffekte	Standard, Lebhaft, Sepia, Monochrom
Reinigung	Objektiv mit weichem, trockenem Tuch reinigen
Sicherheitshinweise	Vor elektrostatischen Entladungen und Feuchtigkeit schützen

Häufig gestellte Fragen - Clip Tube EASYPIX

Wie schalte ich die Kamera ein?

Drücken Sie den Power-Knopf (obere Taste an der Rückseite), um die Kamera einzuschalten. Ein erneutes Drücken schaltet sie aus.

Wie lege ich die Batterien ein?

Öffnen Sie die Batteriefachabdeckung an der Unterseite. Legen Sie zwei AA-Alkalibatterien ein und achten Sie auf die richtige Polung. Schließen Sie die Abdeckung.

Wie setze ich eine SD-Karte ein?

Schalten Sie die Kamera aus. Schieben Sie die SD-Karte mit den Kontakten nach unten in den SD-Kartenschlitz an der Seite, bis sie einrastet. Nicht mit Gewalt einsetzen.

Wie mache ich ein Foto?

Stellen Sie den Modus auf Fotomodus (Symbol Kamera). Richten Sie die Kamera auf das Motiv und drücken Sie den Auslöser (REC-Taste).

Wie nehme ich ein Video auf?

Drücken Sie die Mode-Taste, um in den Videomodus zu wechseln (Symbol Videokamera). Drücken Sie die REC-Taste zum Starten und erneut zum Stoppen.

Wie lösche ich ein Foto oder Video?

Wechseln Sie in den Wiedergabemodus. Wählen Sie die Datei mit den Pfeiltasten aus und drücken Sie die Delete-Taste (Mülleimer-Symbol) oder halten Sie die Mode-Taste gedrückt, um Löschoptionen aufzurufen.

Wie verbinde ich die Kamera mit dem Computer?

Schieben Sie den USB-Schalter an der Seite, um den USB-Anschluss auszufahren. Verbinden Sie das Kabel mit dem Computer. Die Kamera wird als Wechseldatenträger erkannt.

Wie aktiviere ich den Selbstauslöser?

Halten Sie im Fotomodus die Mode-Taste gedrückt, um das Schnellmenü zu öffnen. Wählen Sie mit der Pfeil-nach-oben-Taste das Selbstauslöser-Symbol und bestätigen Sie mit REC. Stellen Sie die Verzögerung (2 s, 10 s oder 10+2 s) ein.

Wie stelle ich den Makromodus ein?

Schieben Sie den Makroschalter an der Seite der Kamera auf das Blumensymbol für Nahaufnahmen (11-18 cm). Für Normalaufnahmen (ab 0,5 m) schieben Sie ihn auf das Bergsymbol.

Wie reinige ich das Objektiv?

Verwenden Sie ein weiches, trockenes Tuch, um Staub und Fingerabdrücke vorsichtig vom Objektiv zu entfernen. Vermeiden Sie aggressive Reinigungsmittel.

BEDIENUNGSANLEITUNG Clip Tube EASYPIX

CLIP TUBE

Manual

1. Get to know your DV (camera)

1.1 Features

5.0 Mega pixels resolution sensor

Digital video camera

Digital still camera

TV output

2.0° LTPS real color display

Internal 64 MB flash memory and SD card support

Driver free for Windows XP/Vista and MAC 9.x and X.x

Macro mode

2. Functional parts:

Technical diagram of a handheld device with numbered components and labeled parts

1	Strap hook. Hook for attaching the wrist strap to the camera.
2	SD card slot. SD card slot.
3	AV port. For television connection.
4	Macro switch	Macro mode: Select this mode to take close-up photographs (distance 11cm - 18cm).Normal mode: Select this mode to take photographs from 0.5m - infinity.
5	LCD screen. Display photographs, video clips, camera setting and menu.
6	Microphone	For voice input.
7	Lens	Records the image to be taken.Note: Keep the lens clean. DW and fingerprint's wall affect the quality of the picture.
8	USB interface	Via this connection, you can download photographs and video clips to a computer.
9	USB switch. Slide it to pop-up the USB interface.
10	Battery door. 2xAA alkaliene batteries.
11	Delete. Press it to delete the photo or video clip in playback mode.
12	Mode. Press it to select different mode/press and hold it to enter setting menu.
13	Left	For menu LEFT selection
14	UP	UP & Digital zoom in.
15	Right	For menu right selection
16	Power cord/tail button.	Press this button to turn on, press again to turn off.
17	Speaker	Speaker
18	REC	Press this button to take photographs or start/stop recording a video clip, and press it to confirm changes.
19	Down	Down & Digital zoom out.

3. Explanation of the status icons

1 9 7 11 5 DD / MM / YYYY A 2 10 3 8 6 00010 M 4

Item	Function	Description
1	Battery indicator	The batteries are full.The batteries are empty
2	Recording mode	Setting for photographs takingSetting for videos capture
3	Date stamp	Displays the date day/month/year
4	Memory or SD card indicator	Indicates memory or SD cardPictures stored in built-in memoryPictures stored in SD card
5	Photo / Video counter	Photo mode: No. of balance picture can be taken;Video mode: Balance of recording line in second,Play/box mode: The No. of pictures or video file.
6	Selected Resolution	12M= 4032x30248M= 3264x24485M= 2560x1920;3.1M = 2048x1536;2M= 1600x12001.3M= 1280x960;VGA= 640x480;OVGA= 320x240
7	Photo Recording Mode	Single shotContinue shot
8	Picture quality	The quality is fine (Default).The quality is standard.The quality is economy.
9	Brightness Alert	Alert user to hold the camera steadily.
10	Normal / Macro mode indicator	Normal mode (0.5m – infinity)Macro mode (11cm -18cm)
11	View center

4. Details for DV (camera) setting

Size		12M pixel resolution	4032 x 3024
		9.0M pixel resolution	3254 x 2448
		5.0M pixel resolution	2580 x 1920
		3.1M pixel resolution	2048 x 1536
		2.0M pixel resolution	1600 x 1200
		1.3M pixel resolution	1280 x 960
		VGA resolution	640 x 480
Quality		Fine(Default)/Standard/Economy	Picture quality set
Scene mode value		Auto(Default)/Sport/Landscape spe/	Scene set
		H=2,H=5/3,H=6/3,H=2/3,H=1/3,H=1,6(Default)	Level of exposure
White balance		Auto (Default)	Automatic white balance
		Daylight	White balance selected for daylight surrounding
		Cloudy	White balance selected for cloudy surrounding
		Tungsten	White balance selected for tungsten lighting
		Fluorescent	White balance selected for fluorescent surrounding
ISO		Auto(Default)/100X200	Sensitivity select
Color		Standard (Default) / Vivid / Sepia / Monochrome	Color setting
Saturation		Normal(Default) / High / Low	Saturation setting
Sharpness		Normal(Default) / Hard /Soft	Sharpness setting
Self timer		2s	Set the delay time at 2s to take a picture
		10s	Set the delay time at 10s to take a picture
		10+2s	Set the delay time at 10s to take a picture, and then every 2s to take pictures automatically.
Date Inout		Off(Default)/Set	DD, MM,YYYY
Time Stamp		Off(Default)/Date Only/Date & Time	Show the date and / or time on the pictures
Burst		Off(Default)/On	Press REC key to take three photos.
Size		VGA	640 x 480
		QVGA	320 x 240
Exposure value		H=2,H=5/3,H=6/3,H=2/3,H=1/3,H=1,6(Default)	Level of exposure
White balance		Auto (Default)	Automatic white balance
		Daylight	White balance selected for daylight surrounding
		Cloudy	White balance selected for cloudy surrounding
		Tungsten	White balance selected for tungsten lighting
		Fluorescent	White balance selected for fluorescent surrounding
Format		Execut/cancel	Format the memory card
Language		English/T-Chinese/S-Chinese/French/German/Salian/So anish/Portuguese/Japanese	Select display language
Auto off		1/3/5 min and Off	Auss power off in Tinin, 3min(default) or 5 min if no operation
Sys. Reset		Execut/cancel	Restore default setting
Light-Frequency (Flicker)		50Hz	Main European electricity frequency
		60Hz	Main American electricity frequency
TV Out		NTSC	American and Japanese video format
		PAL	European video format.

Note: The camera will remain the last setting when it is turned off.

5. Using the DV(camera)

5.1 Installing the batteries

1. Open the battery door
2. Insert2x AA alkaline batteries into the camera.
3. Press the POWER button to turn on the DV (camera).

5.2 Inserting a memory card (not included)

This DV (camera) has built-in internal memory. This memory can be extended with a SD memory card (not included).

Follow the instructions given below to insert the optional SD memory card into the camera.

1. Turn off the camera first.

2. Insert the SU card into the camera.

Note: There is only one right direction to insert the SD memory card into the slot. Do not force the card into the slot, or else it may damage both the camera and the SD memory card.

Note: The SD memory card must be formatted before taking photographs. See the following sections for more information.

5.3 Formatting the memory or SD card

1. Press and hold Mode button to enter setting menu

2. Select Setup setting by Right key and select Format mode by up or down key;

3. Press REC to confirm and select by up or down key.

4. Press REC to cover the card customer.

5. Press REC to format the card or memory.

5.4 Setting the resolution

The DV (camera) can be set to different resolutions.

1. Press and hold mode solution to set proper resolution.

Resolution: VGA (640 x 480), 1.3M (1280 x 960), 2.0M (1600 x 1200).

3.1M (2048 x 1536), 5M (2560 x 1920), 6M (3264 x 2448), 12M (4032 x 3024)

1. Different resolutions will be displayed. Select the desired resolution by using the buttons and then press the REC button to confirm the selection. ▲ or ▼

5.5 Taking Video or photographs

1. Tum on the DV (camera)

2. Press Mode to set the DV to photo mode (A) or video mode (B)

3. Depending on the distance to the object being photographed, see Macro switch to adjust the distance. Select the flower symbol ( ● ) if you wish to take a close-up photograph (11cm - 18cm). If you wish to take videos or photograph of surroundings or people (0.5m - infinity), set the Macro switch to Normal mode ( ● ).

4. Use the LCD screen to aim the object you wish to take video or photograph.

5. Press REC button.

Caution: 1) Taking picture for fast-moving object is not recommended. 2) Image may be distorted when taking picture in a moving vehicle.

5.6 Zoom in and out

The DV can zoom in up to 8 times.

Zoom in or out by pressing the ▲or ▼ button, a number will appear on the display. 8.00 is the maximum zoom.

5.7 Taking photographs using self-timer function

You can use the self-timer function when you wish to take a photograph for yourself or when you wish to photograph for an object where the camera must be as still as possible.

1. Set the camera to photo mode

2. Press and hold Mode button. The quick menu will appear.

3. Press ▲to self-timer mode, press REC and ▲or ▼ to set the delay time: 2 seconds / 10 seconds / 10+2 seconds or off.

4. Press the REC button to confirm. The self-timer function is now ready for use.

5. Aim at the object you wish to photograph.

6. Press the REC button to take a photograph.

7. The photograph will be taken after the timer reaches the delay time that you pre-set, and the camera will beep once.

5.8 Playback photographs

1. Press Mode button to set playback mode, and ◀ or ▶ to select the video clip or photo.

2. Press ▲ or ▼ to zoom the image.

3. Press and hold Mode button to select SLIDE SHOW. Press REC to confirm and ▲ or ▼ to select time. The pictures saved in your camera or your SD card will be displayed in sequence automatically.

5.9 Playback video clips

1. When video clips are displayed, press REC to play, and press DOWN key to stop.

2. Press REC to pause the playback

3. Press Mode to exit.

5.10 Delete photographs and video clips

Follow the instructions given below to delete photograph or video.

1. Press MODE to select Playback mode.

2. Press and hold MODE button and select Single/All/Select , press REC to confirm.

3. If you select Protect picture, your current file or images can not be deleted.

4. Page MENI to exit

5. Press MENU to exit

Note: you can also press Delete button to delete photograph or video clips in playback mode.

6. Connecting to a PC

By connecting the camera to a PC, your system be expanded to fill a wide range of uses. Using the 'ARCSOFT MEDIAIMPRESSION' performs images saving, browsing, file management, printing photos, email photos and upload videos to YOUTUBE.

Also the unit can be connected to the computer as Mass Storage Device.

Autorun function (Option)

When you connect the Digital Camera to the PC a simple Arcsoft Media Impression software which inside the camera will be automatically

which inside the memory will be automatically.

As different from user setting on the computer, the software may not be installed automatically. Please double click the icon inside COMPUTER.

Note: AutoRun function is only compatible with Windows XP / Veta.

Note: Under the environment with electrostatic discharge, the sample may malfunction and

/memory lost. It requires user re-install the battery to reset the sample.

1. Specifications

Sensor 5.0 Me		us pixel CMOS sensor
Image resolution	DV	VGA (540x480)
		OVGA (320x240)
	DC	12.0 Mega pixels: (4032x3026) (Hardware Interpolation)
		8.0 Mega pixels: (3264x2448) (Hardware Interpolation)
		5.0 Mega pixels: (2560x1920)
		3.1 Mega pixels: (2046x1536)
		2.0 Mega pixels (1600x1200)
		1.3 Mega pixels (11280x360)
		VGA (540x80)
Lens		F/2.8 fin 5mm
Focus range		0.5m ~ Infinity
Macro mode		1cm ~ 18cm
Digital zoom		8x
LCD display		2.0" real color LTPS TFT
White balance		Auto/Daylight/Ucloudy/Tungsten/Fluorescent
DV mode		Up to 3G7pe@VGA (Use SD card)
Buffer memory		64 MB Flash memory
	DV	VGA fs S
		OVGA (50 S)
Picture Capacity in I-M memory (The quantity of pictures venes and depends on the complexity of the scene)	DC	VGA: (640x480) - 325 Pictures1.3M: (1260x565) - 155 Pictures2.0 M: (1600x1200) - 112 Pictures3.1M: (2046x1536) - 76 Pictures5.0M: (2560x1920) - 65 Pictures8.0M: (3264x2448) - 47 Pictures12M: (4032x1004) - 30 Pictures
External memory card		SD card supports up to 8GB
File format		Picture, JPEG, Video, AVI.
Self timer		2'10'10-2 seconds
PC interface		USB 1.1
TV-out		NTSC/PAL
Power source		2xAA alkaline batteries.

7.1 System requirement

Operating System	Windows XP/Vista or above
	Mac 9 x or X x
CPU	Pentium II or above
RAM	At least 64MB
Interface	USB port
CD 4x s	ped CD ROM or above

1. Trouble shooting

Problem	Cause	Solution
Cannot turn on the camera by pressing the "power" button.	Low battery power.Battery placed at wrong potentials.	Replace or install the battery correctly.
Photos can not be saved when taking pictures.	The memory card or built-in memory hasn't been formatted properly.	Format the memory in SETUP mode of the camera. Please refer to section 5.3.
Cannot find removable disk after connecting the camera to the computer.	Connection failure.	Make sure all cable connections are secured and restart the computer if necessary.
The batteries used up very fast.	Use wrong type of battery.	Replace with new ALKALINE battery.
The video photos are blurry	1. The DV (camers) is not held steadily2. The lens of DV (camers) is dirty.3. The DV (camers) is Set to wrong macro mode.	1. Hold the DV (camers) steadily until it beeps when taking video photo.2. Clean the lens with soft dry cloth.3. Set the macro mode according to the distances of subject.

For EU only

AM-DVS41K-AGB-CLV-R