M-1015 - Autoradio MUSE - Kostenlose Bedienungsanleitung

Produkttyp	Autoradio mit CD/MP3/WMA-Player
Marke	MUSE
Modell	M-1015
Stromversorgung	12 V Gleichstrom, negative Masse
Sicherung	15 A (Flachsicherung)
Lautsprecherimpedanz	4 Ohm (typisch)
Maximale Ausgangsleistung	50 W x 4 (typisch)
Abmessungen (Einbaumaße)	1-DIN (ca. 178 x 50 x 160 mm)
Gewicht	ca. 0,5 kg
UKW-Frequenzbereich	87,5 – 108 MHz
Empfindlichkeit (UKW)	15 dBu (bei -30 dB Rauschabstand)
Signal-Rauschabstand (UKW)	50 dB
CD-Kompatibilität	CD, CD-R, CD-RW, MP3, WMA
USB-Anschluss	Ja (vorderseitig, USB Typ A)
SD/MMC-Kartensteckplatz	Ja (vorderseitig, hinter abnehmbarem Panel)
AUX-Eingang	Ja (3,5 mm Klinke, vorderseitig)
RDS-Funktionen	AF (Alternativfrequenz), TA (Verkehrsdurchsage), PTY (Programmtyp), EON (Enhanced Other Networks)
Equalizer-Einstellungen	Flat, Pop, Rock, Classic
Loudness-Funktion	Ja (einschaltbar)
Uhrzeitanzeige und -einstellung	Ja (über DSP-Taste)
Sender speicherbar	6 pro Band (FM1, FM2, FM3)
Abnehmbare Frontblende	Ja (Sicherung gegen Diebstahl)
Reset-Taste	Ja (auf der Geräteunterseite)
Mitgeliefertes Zubehör	Einbaurahmen, Außenrahmen, Schraubenset, Schlüssel (Entriegelungswerkzeug), Anschlusskabel, Bedienungsanleitung

Häufig gestellte Fragen - M-1015 MUSE

Wie schließe ich das Autoradio M-1015 korrekt an?

Verbinden Sie die farbcodierten Kabel gemäß dem Schaltplan im Handbuch. Achten Sie darauf, dass das rote Zündungskabel und das gelbe Batteriekabel nicht kurzgeschlossen werden. Die Lautsprecherkabel (schwarz/weiß) dürfen nicht mit der Fahrzeugkarosserie verbunden werden. Verwenden Sie nur eine 12-V-Negativmasse-Bordspannung.

Wie setze ich das Gerät auf Werkseinstellungen zurück?

Drücken Sie mit einem spitzen Gegenstand (z. B. Kugelschreiber) die Reset-Taste auf der Geräteunterseite. Dadurch werden Uhrzeit und gespeicherte Sender gelöscht.

Wie stelle ich die Uhrzeit ein?

Halten Sie die DSP-Taste gedrückt, bis die Stundenanzeige blinkt. Stellen Sie mit den Tasten ▶ und ◀ die Stunden ein, bestätigen Sie mit DSP. Dann stellen Sie die Minuten ein und bestätigen erneut mit DSP.

Warum schaltet sich das Radio nicht ein?

Prüfen Sie, ob die Zündung auf ACC steht und die Sicherung (15 A) intakt ist. Ist die Sicherung durchgebrannt, ersetzen Sie sie durch eine identische. Überprüfen Sie auch die Kabelverbindungen.

Wie kann ich eine CD abspielen?

Legen Sie eine CD mit der bedruckten Seite nach oben in den Schlitz ein. Die Wiedergabe startet automatisch. Bei eingelegter CD drücken Sie MODE, um den CD-Modus zu wählen. Zum Auswerfen drücken Sie die ▲-Taste.

Wie verbinde ich ein USB-Gerät oder eine SD-Karte?

Schließen Sie das USB-Gerät an den vorderen USB-Anschluss an – das Gerät wechselt automatisch in den USB-Modus. Für SD/MMC-Karten klappen Sie die Frontblende nach unten (Taste ▲), stecken die Karte ein und schließen die Blende. Drücken Sie MODE, um zwischen den Quellen zu wechseln.

Was bedeutet die AF-Funktion (Alternativfrequenz)?

Die AF-Funktion sucht automatisch nach einer besseren Frequenz für denselben Radiosender, wenn der Empfang schwächer wird. Drücken Sie die AF-Taste, um die Funktion ein- oder auszuschalten. Wenn das AF-Symbol blinkt, ist der Empfang schlecht.

Wie speichere ich Radiosender manuell?

Stellen Sie den gewünschten Sender mit den Tasten ▶ oder ◀ ein. Halten Sie dann eine der Zifferntasten (1–6) für mindestens 2 Sekunden gedrückt. Der Sender wird auf dieser Taste gespeichert.

Was kann ich bei schlechtem Radioempfang tun?

Überprüfen Sie die Antennenverbindung. Schalten Sie die AF-Funktion ein, um eine bessere Frequenz zu finden. Bei sehr schwachen Signalen wählen Sie den Sender manuell. Vermeiden Sie Abschattungen durch Gebäude oder Tunnel.

Wie reinige ich das Autoradio und die Frontblende?

Reinigen Sie die Frontblende mit einem weichen, trockenen Tuch oder leicht angefeuchtetem Fensterleder. Verwenden Sie keine Lösungsmittel. Reinigen Sie die Kontakte zwischen Hauptgerät und Frontblende bei Bedarf mit einem Alkoholtupfer (Gerät vorher ausschalten).

BEDIENUNGSANLEITUNG M-1015 MUSE

muse

M-1015 MR

User Manual

CAR RADIO CD/MP3 PLAYER WITH USB/SD/MMC

Please read the instruction carefully
before operating the unit

English

INSTALL AND DETACH THE UNIT

Install the unit - Method 1: DIN Front-Mount

- Method 2 DIN Rear-mount (For Japanese car) 1. Remove the outer trim frame

1. Select a position where the screw holes of the mounting bracket supplied with the car and the screw holes of the main unit become aligned (are tted).

2. Tighten the screws. And then fasten them to the car.

GB-4 GB-5

AR-3045 IB MUSE 001 REV0 GB.indd1 1

PRECAUTIONS

1. Do not attempt to modify the unit, modifying the unit may cause an accident.
2. Installation or servicing of the unit by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock or other hazards.
3. Stop the vehicle before carrying out any operation that could interfere with your driving.
4. Keep the volume at a level which you could hear sounds from outside the vehicle.
5. Do not work in extremely high or low temperature. Be sure the temperature inside the vehicle is between +60°C and -10°C before turning on your unit.
6. When replacing the fuse(s), the replacement must be of the same amperage as shown on the fuse holder.
7. Do not block vents or radiator panels. Blocking them will cause heat to build up inside and may result in 6 mo
8. Using this unit without running the engine can result in battery drainage
9. Use only in cars with a 12 volt negative ground.
10. After completing the installation and beginning to play the unit (including replacing
11. After completing the installation and beginning to play the unit (including replacing the battery), please remove the front panel at first, and then press RESET button on the base with pointed object (such as ball-point pen) to set the unit to initial status.

11. Before you install the unit, remove absolutely the two transportation screws on top of the unit.

Notice on disc

Use such discs may cause malfunction or breakdown of the internal mechanism: with large scratches; with irregular shape; cracked; with any cellophane tape or other glue on it or with peeling off marks; with protection sheet; equipped with stabilizers, etc.

GB-1

Install the front panel

Insert the panel into the housing and make sure the panel is properly installed. Otherwise, abnormality occurs on the display or some keys will not function properly.

Detach the Front Panel

Press ▲ button in the upper left corner, and then the front panel will be folded down.

Note: Never put any objects into the front panel.

Detach the unit

1. Detach the front panel. (please refer to upper part)

2. Take out the outer trim frame.

1. Insert the keys supplied to the unit at the both sides of the unit (shown as illustrated) until they click. Pulling the keys and makes them to remove the unit from the dashboard.

GB-2

LOCATION OF CONTROLS

1. (release button)
2. PWR (Power button)
3. 9/▶ button (Skip forward)
4. TIMORE button
5. 7/MODE button
6. SEL/VOL knob
7. AMS/SCH button (Automatic
   storing)
8. TA button (Traffic alarm)
9. dice slot
10. disc slot
11. LCD display
12. ▲ (Eject button)
13. USB slot
14. AUX in jack

15. O/DSP butto

16. 6/DSP button (Display time)

17. 6/DIR+ button (Directory up)

18. 5/DIR-button (Directory down

19. 4/RDM button (Random)

20. 3/RPT button (Repeat)

21. 2/INT button (Intro)

22. 1/PAU button (Paus

23. BAND/LOUD button

24. PTY button (Program type selecting)

25. EQ button (equalizer)

26. 8/ (skip backward)

27. AF button (Alternative Frequency

28. Reset button

29. SD/MMC slot

Front panel

€
-
[Non-Text]
[Non-Text]
[Non-Text]
m = 311
The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.
m = 311
。
Pr
exo
[Non-Text]
[Non-Text]
utton
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]
[Non-Text]

GB-6

[Non-Text]

CONNECTION

1. Antenna Receptacle
2. Line out Right (red)
3. Line out Left (white)
4. Output plug (male)
5. Output plug (male)
6. Output plug (female)
7. FUSE holder (15 A)

Caution!

- Make sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage the vehicle's electrical system. - Make sure to connect the speaker (-) leads to the speaker (-) terminal. Never connect the left and right channel speaker cables each other or to the vehicle body. - Make sure all the connections are completely correct before turning on your unit.

Do not connect the ignition wire (red) and the battery wire (yellow), it may cause a short circuit, even result in re.

GB-3

Time display

Press DSP button (13) to show the current time on display Adjust time: Long press DSP (13) until clock time with flashing hour digits appears. Then Press >> and <> and <<button to adjust the minute value and press DSP (13) to confirm.

press BDI (15) to confirm Information display

- In case of receiving a RDS station

In radio mode: CT -> FREQ -> PTY -> PS

In CD (MP3 / WMA) mode: CD (MP3/WMA) -> CT -> FREQ -> PTY ->PS

- In case of not receiving a RDS station.

In radio mode: CT -> FREQ -> NO PTY -> NO PS In CD mode: CD + CT + FREQ + NO PTY + NO

in CD mode. CD -> CT -> FREQ -> NO PTY -> NO PS NOTE: It will return to normal play mode if as low is pressed within 5 seconds

NOTE: It will be

Reset the unit

Operating the unit for the first time or after replacing the car battery, you must reset the unit. To set the unit to initial status, press RESET button (25) located on the base with a pointed object. When some errors occur in display, you can also reset the unit, but it will erase the clock setting and some memorized functions.

SOUND FEATURES

To increase or decrease the sound level, rotate SEL/VOL knob (5) clockwise or anti-clockwise.

Setting the Sound:

Repeatedly press SEL/ VOL knob (5) to select the desired mode in the following order: "BAS" (Bass) -> "TRB" (Treble) -> "BAL" (Balance) -> "FAD" (Fade) -> "BEEP" (BEEP ON/OFF) -> "TA VOL" (TA volume) -> "EON" (EON ON/OFF) -> "VOL" (Volume). After selecting the desired mode, you can adjust the current level by rotating the SEL/ VOL knob (5).

- BEEP: under Beep mode, rotate SEL/VOL (5), LCD shows "BEEP ON" or "BEEP

OFF ^- , choosing corresponding status can turn on or turn off beep.

- EON: please refer to RDS operation Note: The unit will return to the previous mode if no adjusting within 3 seconds.

Preset equalizer

When you are listening to popular music, classic music or rock music, using EQ to select relative status can adjust the sound quality. Repeatedly press EQ (8) to select different equalizer mode in following order: FLAT->POP->ROCK->CLASS -> EQ off.

Switching Loudness On/off

Press and hold BAND/LOUD button (20) until "LOUD ON" shows on display to activate LOUD function. By this function, you can increase the low frequency, which can improve sound sensitivity. Press and hold this button again until "LOUD OFF" to cancel LOUD function.

GB-7

2011-2-28 15:58:30

AR-3045 IB MUSE 001 REV0 GB.indd1 1

LISTENING TO THE RADIO

Selecting band

In tuner mode, repeatedly press BAND/ LOUD button (20) to select bands in following order: FM1->FM2->FM3.

。

Manual/automatic tuning

- Manual Tuning

Press and hold button ▶▶ or ◀◀ (3/23) until "MANUAL" shows on display, then press button ▶▶ or ◀◀ (3/23) continuously to select a station downward or upward. Press and hold button ▶▶ or ◀◀ (3/23) to tune the station with a faster speed.

Automatic Turning

- Automatic Tuning Press ▶ or ◀ (3/23) once, the radio automatically searches a station upward or downward respectively and plays when it finds a station. Press ▶ or ◀ (3/23) once to stop scanning.

Scanning/memorizing stations automatically

- By AMS/SCH button (6

In tuner mode, press and hold AMS/SCH button for 3 seconds to start scanning for stations and store them automatically in memory. Press AMS/SCH button (6) the radio plays each preset station for a few seconds. Press AMS/SCH (6) again or numeric buttons 1-6 to listen to corresponding station.

- By number button 1-6 (14-19)

1. Tune to a station by ▶ or ◀ (3/23).

2. Press and hold one of the 1-6 Number buttons (14-19) for 2 seconds until LCD shows the corresponding number, which indicates that station is stored in the corresponding number button.

3. Under radio mode, press 1-6 Number buttons (16-21) to listen to stored stations.

4. When you are listening to a station stored on a number button, press and hold another number button for more than 2 seconds to store the station on this number button.

Note: The unit can be stored up to 6 stations for each band

-- RDS (Radio Data System) Operations --

This unit has a built-in RDS decoder system that supports broadcast stations

transmitting RDS data. This system can display the name of the broadcast station being received and can automatically switch to the broadcast station with the best reception as you travel on long distances (AF switching). A traffic announcement broadcast from an RDS station, no matter what mode you are, additionally, if EON information is received, enables automatic switching of other preset stations on the same network and interruption of the station being received with traffic information. This function is not available in some areas.

Note

* Do not use CDs with irregular shape (for example octagonal or heart-shaped).

* Notes: CD-Rs or CD-RWs playback capability of this player may vary depending on quality media, CD-Burner, burning speed and application software.

* There are many USB devices or SD/MMC card on the market. We cannot guarantee to support all different models. Please try another USB device or SD/MMC card if your device is not supported.

* The unit might not support all the multimedia tiles stored in SD/MMC card or USB because it includes some special playback procedure which might not be compatible with the procedure of this unit.

LISTENING TO AUXILIARY SOURCE

1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack (12)

2. Press PWR (2) button to turn the unit on

3. Press MODE (4) to select AUX mode

4. Start playback from your auxiliary source

5. Adjust the volume (5) to desired level

6. Disconnect your auxiliary source from the Aux in jack (12), press MODE button (4) to select other source.

MAINTENANCE

-

Precaution - Clean the front panel with a soft cloth, or damp chamois leather. Never use solvents.

- Handling the Detachable Front Panel: Do not expose to rain or water.

- Do not drop or apply shock.

- Make sure that you keep your set away from high temperatures.

- The use of apparatus in moderate climates

- Do not be exposed to dripping or splashing, and that no object filled with liquids, such as vases, shall be placed on the apparatus.

- No naked flame sources such as lighted candles should be placed on the apparatus.

Cleaning the Connector

If the connector between the main unit and the front panel is dirty, may result in abnormal working condition. To avoid such problems, please detach the front panel, and clean the connector with an alcohol swab. Gently clean and avoid damaging the connector.

Notes:

For the sake of safety, always shut down the engine and take out the ignition key before cleaning. Never keep your finger or any metal device on the connector directly.

Replacing the Fuse

Make sure the amperage matches the specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs, it would be subjected to the malfunction in-house. In such cases, please consult the nearest service dealer.

AR-3045 IB MUSE 001 REV0 GB. indd2 2

Alternative frequency (AF)

The AF function switches to a different frequency on the same network in order to maintain optimum reception. In FM mode, press AF button (24), certain program will be automatically searched and received. If the reception of the current broadcast station deteriorates, "AF" appears in the display and the radio searches for the same program on another frequency. Press AF button (24) again to cancel this function

When reception is bad, the "AF" icon will blink

Press and hold AF button (24) for 5 seconds, the unit will be under "REG ON" or "REG OFF" mode:

REG ON: Should be selected to list the local broadcast of the current station, even if there is a national broadcast of this station.

REG OFF: Should be selected to listen to the national broadcast of the current station.

station.

Trafi c alarm (TA)

In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programme (TP) automatic tuning is also possible.

Press TA button (7), when LCD shows "TA", traffic program will be automatically searched and saved, when LCD shows "TP", this means that the RDS broadcast station being received has traffic announcement programmes.

If you press TA button (7) while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode.

If a TP station is not received, the unit continues searching.

Press TA button (7) again to stop searching, "TA" goes off.

[Non-Text]

ALARM

"ALARM" will be displayed when an emergency broadcasting is received; meanwhile sound output level will be adjusted to the preset output level automatically when the volume control is set at minimum.

FON: (Enhanced Other Networks Information)

EON (Intrinsic Other Networks Information) Press and rotating SEL/VOL (5) to select EON mode, EON ON. When receive the EON information, the EON indication is on. With EON facility, it offers the ability for local stations to "break into" a national station's broadcast for the duration of a Traffic Announcement.

Program type selecting (PTY)

When PTY is selected, the radio starts to search corresponding PTY information, and stops when the corresponding PTY information is detected.

If corresponding PTY information does not exist any more, PTY is automatically stopped to normal mode.

When RTX mode is engaged. The RTX switch is shared as follows:

TROUBLE SHOOTING GUIDE SPECIFICATIONS

Symptom	Cause	Solution
No power.	The car ignition switch is not on.	If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”.
	The fuse is blown.	Replace the fuse.
Discs can not be loaded or ejected.	Presence of CD disc inside the player.	Remove the disc in the player, then put a new one.
	Inserting the disc in reverse direction.	Insert the compact disc with the label facing upward.
	Compact disc is extremely dirty or defective disc.	Clean the disc or try to play a new one.
	Temperature inside the car is too high.	Cool off or until the ambient temperature return to normal.
	Condensation.	Leave the player off for an hour or so, then try again.
No sound.	Volume is in minimum	Adjust volume to a desired level.
	Wiring is not properly connected.	Check wiring connection.
Sound skips.	The installation angle is more than 30 degrees.	Adjust the installation angle less than 30 degrees.
	The disc is extremely dirty or defective disc.	Clean the compact disc, then try to play a new one.
The operation keys do not work.	The built-in microcomputer is not operating property due to noise.	Press the RESET button.
		Front panel is not properly fixed into its place.
The radio does not Work. The radio station automatic selection does not work.	The antenna cable is not connected.	Insert the antenna cable firmly.
	The signals are too weak.	Select a station manually.

According to above 2 groups, the preset number is used for PTY selection as follows:

MUSIC group

1. POP M. ROCK M

2. EASY M, LIGHT M

3. CLASSICS. OTHER M

4. JAZZ, COUNTRY

5. NATION M. OLDIES

6. FOLK M

[Non-Text]

SPEECH group

1. NEWS, AFFAIRS, INFO

2. SPORT, EDUCATE, DRAMA

3. CULTURE, SCIENCE, VARIED

4. WEATHER, FINANCE, CHILDREN

5. SOCIAL, RELIGION, PHONE IN

6. TRAVEL, LEISURE, DOCUMENT

LISTENING TO DISC/USB/SD

Insert the disc into the DISC SLOT with the printed side facing up. The player will play the disc automatically. If a disc was inserted, press MODE button (4) to start playing. To remove the disc, press ▲ button.

To insert a USB devices (not included)

Open the plastic cover, connect your USB device to the USB slot (11), it will switch to "USB" mode automatically. If USB has been inserted, press MODE button (4) to switch to USB mode.

To insert an SD/MMC card (not included)

Press button (1) to fold down the front panel first. Insert your SD/MMC card in card receptacle (26). Close the front panel and it will automatically start playing. If SD/MMC card has been inserted, press MODE button (4) to switch to card mode.

(1) 2017-04-29 (The Board of Directors)

Basic player functions

Play/pause: press 1/PAU (19) to suspend momentarily the playing track. Press (19) once again to resume playing.

Skip/fast search: press button ▶(3) to skip forward to next track and ◀(23) to skip backward to previous track. Press and hold ▶or ◀(3/23) to search quickly within a track.

Intro scan: press 2/INT button (18) when it show "INT ON", then the player will play the first 10 seconds of each track in the disc, press again to cancel this function when it shows "INT OFF".

Repeat a track: Press RPT button (17) once to repeat your desired track. Press again to repeat all.

Random playing: Press RDM button (16), all tracks will play randomly

SELECTING DIRECTORY UP/DOWN: Press DIR-button (15) or DIR + button (14) to select directory downward or upward. If the MP3 disc does not contain any directory, there is no function of pressing DIR-button (15) or DIR + button (14).

General

Power Requirement

Load Impedance

Max. Power Output

Tone Controls

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Trebi

Dimensions

Mounting Dimensions

Weight Approx.

FM Section

Tuning Range

IF Range

Usable Sensitivity (-30dB) 15 dBu

Signal-to-noise Ratio 50 dB

Stereo Separation

CD player Section

Signal-to-noise Ratio

Separation

Distortion

Distortion Frequency Response

(1) 2017年1月1日

Note:

Due to continuous product improvement, specifications and design are subject to change without prior notice.

CAUTION! This set uses a laser beam. To prevent any accident due to this type of beam, the set should only be opened by properly trained personnel. The unit conforms to the international safety specifications and to guide lines of the European community and also complies with current standards concerning electrical safety and electromagnetic compatibility EMC.

rd

Searching a track in MI 6-03/002/sara. Use the keys for corresponding numbers of

Use the keys for corresponding number of letter when you search a music file.

KEY	Mode Select
SEL/VOL(press)	ENTER
M1 (1/PAU)	A, B, C, 1
M2 (2(INT))	D, E, F, 2
M3 (3/BPT)	G, H, I, 3
M4 (4/RDM)	J, K, L, 4
M5 (5/DIN-)	M, N, O, 5
M6 (6/DIN+)	P, Q, R
7/MODE	S, T, U, 7
8(▶)	V, W, X, 8
9(▶)	Y, Z, SPACE, 9
0/DSP	—, +, 0
SEL/VOL(rotate)	All the CHARACTER above

- Search by track number:

1. Press AMS/SCH button (6) once LCD shows "NIIIM SCH" and "NIIIM ***" press the

2. Press AMERSON button (5) once, EOG shows: NOW SOH keys standing for corresponding numbers (refer to upper list)

3. Press SEL/VOL knob (5) to start playing

2.1.16

• Search by letter:

1. Press AMS/SCH button (6) twice LCD shows "EILE SCH" and "*..." press the

2. Press AMS/SCI button (6) twice, LCD shows TILL SOFT and 4000 press the keys standing for corresponding letters (refer to upper list).

3. Repeat this procedure until you finish the file name

4. Press SEI (VOL knob (5) to start playing

5. Pio

- Search by folder

1. Press AMS/SCH button (6) thrice. LCD shows "DIR SCH" then the total directories

and available directories name

1. Rotate the SEL/VOL knob (5) to search your desired folder, press SEL/VOL knob (5)

to enter the selected directories

1. Rotate the SEL/VOL knob (5) to select your desired track press SEL/VOL (5)

button to start playing.

2.2018

Exit disc/ USB/SD card mode

1. Press ▲(10) to elect the disc. If the disc is not taken out within 10 seconds, it will

4.1.1025 (16) to adjust the disk if the disk is not taken out within 10 seconds, it will be automatically reloaded

1. To exit USB mode, dis

mode automatically

1. To exit card mode, take out your SD/MMC card from the unit, it will switch to tuner

2. To sell, bare mises, take out your guarantee care from the end, if we offer to take mode automatically.

GB - 11GB - 10GB - 9GB - 8

WARNINGS

CAUTION

ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. Refer all servicing to qualified personnel.

A

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of "dangerous voltage" inside the unit.

•

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

^

CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.

WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

1

If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste Electrical and Electronic Equipment Directive)

GB - 14GB - 13GB - 12

GB-15

CE

2011-2-28 15:58:41