CarpetXpert EX200 - Damp rengøringsmaskine SHARK - Gratis brugsanvisning og manual

BRUGSANVISNING CarpetXpert EX200 SHARK

Shark CarpetXpert

EX200

EX201

SERIES

Line drawing of a vacuum cleaner with a vertical shaft and base mount (no text or symbols)

To view HOW-TO VIDEOS

scan QR Code located on top of CarpetXpert Tank.

WHAT'S INCLUDED

What's Included: Shark ^® CarpetXpert, 12 oz. Shark Deep Clean Pro Solution, 16 oz. Shark OXY Multiplier, Hose-Cleaning Tool, Hand Tool(s).

Power Button

B. Modp Button

C CarpetXpert™ Tank

D StainStriker™ Tank

E Dirty Water Tank

F Brushroll Cover/Door

G Selector Lever (Hand Tool or Brushroll)

H (3.5") Hand Tool

Spray Outlet

J Suction Inlet

K Reversible Bristics

L Crevice Tool

M Hand Tool Trigger

N Release Button

Hose-Cleaning Tool

P 12 oz Deep Clean Pro

16 oz. OXY Multiplier

R Carry Handle

IMPORTANT SAFETY INSTRUCTIONS - FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS.

READ CAREFULLY BEFORE USE. READ ALL INSTRUCTIONS BEFORE USING THIS CARPET CLEANER.

WARNING

To reduce the risk of fire, electric

shock, injury, or property damage:

quaried restriction DO NOT once into called or by is mostly in it. 2. To reduce the risk of push and augmented operation, upreg before surgery

1. Tri carpet cleaner consists of a meterized nozzle, main box, pole, handle, base, and hand locks. These components contain a vertical connections, vertical awing, and moving posts that potentially present risks to the use.

2. Before each use, carefully respect all parts for a new damage. If a part is damaged, discontinue use.

3. Use only identical mechanical parts.

4. DO NOT use the target channel or any purpose other than one

5. DO NOT

6. Do not fill the se of spicy water off the body at the car, besides.

7. To clean the surface, mice with a dry dot.

8. Keep the carp's cleaner's coat of a macha chimer.

9. DO NOT allow the application to be used by the item. DO NOT allows to be used as a key. One supervision in necessary when used for children.

II. This appliance can be used by persons with reduced physics, sensory or mental capabilities or local perception or knowledge if they have been present or consider instruction and setting one of the experience in a way to understand the needs involved. Clearing and use maintenance shall not be done to children.

1. DO NOT be able to use carpet cleaner with web hands.

2. DO NOT use a hand the duty enter into cross-section lock, tile, inhaled, and brided heater place.

3. Use only identical replacement parts. Only use Share branded 5-laws and a recorder

4. DO NOT put any objects into a clear opening. DO NOT use with any opening to cover, keep lines of dust, dirt, hair, and anything that may reduce airflow.

5. DO NOT use if nozzle air flow is restricted, if the air paths or the motorized floor nozzle become blocked, turn the carpet cleaner off. Remove all manufacturers before you turn on the unit again. Responsers and all carpet cars openings have from hair, feet, fingers, uncovered feel, or loose rolling.

6. DO NOT use I 'sarpel crater is not working as it should, or has been dropped, damaged, left outdoors, or dropped into water.

7. Use extra care when clean to on stairs.

8. DO NOT leave the angel dancer unallenses while plugged in

9. 100% of the air, and the air is a very fast

10. DO NOT close carpet cleaner on unstable surfaces such as chairs or tables. The surrounding area may be slippery and present and of injury.

11. DO HOT use is pick up

a) Line products

b) Hard strip objects of dust (e.g., deep dust).

d) Smzőtor turning objects (zyl mode, sigrotletralb, ar

mikrsi.

e) Утичание от чистанов и петенек (дног 710, д.95016,

D. Took materials for urine bleach, ammonia, or drain channels. 23. DO HOT use in the following areas:

a) Fuzh, Laon

a. Spaces that are enclosed and may contain explosive or heat

James or Apsons lighter build, gasoline, hettene, paint, palm

Itimes, methoalins substances, or flammethylated

1. In line of the first time, the quality adjustment, clearing maintenance or takeout of

2. During clearing or routine maintenance, DO NOT out anything

other than two fibers, or string wrapped around the horizontal

1. DO NOT modify or attempt to repair the tape; shiner yourself do

2. Turn-off a I control before un-tung no.

3. To reduce the risk of line or electric shock due to internal

component, damage, use only stairs' citing tool. See the

1. 10 MOTA company and a company

2. No NOT applied to the bond, the bond is not 100%, and does not apply for a pull-off around short sums of powers. DO NOT

applar or over cord. Keep cord away from tested surfaces.

1. DO NOT using on pulling on cord. To input, grasp the plug, not

2. 10

3. DO NOT use ground electric pulsed flow as line segment

your floor. To avoid damage to flooring and to avoid poecerta

Sipient, after use (all move to a red sealed surface [red]

In this case, the results of the -isopropyl is not possible.

1. DO NOT 11 solution lanes while installed or

belrelling.

1. The areas around where you are dealing may become met, use

[2010] 57(2013) 9:30-8

1. 30th quarter of the following results in the last year:

on your skin in uscres

1. GROUNDING INSTRUCTIONS: This appliance must be grounded.

2. In this case, the circuit has been closed, ground being 40% a path of load resistance for electric current to reduce the risk of electric shock. This guidance's tool has an equipment-grounding conductor and a grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and conditions.

3. WARMING: Invasive mineral local fire equipment training

conductor can result in a risk of electric shock check with a modified conductivity or safety system. They are in doubt as

2014年1月1日，美国国家航空航天局

whether the outlet is proper's ground, DO NOT modify the plug provided with the appliance. If the plug will not all the outlet, have a proper outlet installed by a qualified electron day.

1. This appliance is for use on a room without and has a grounding attachment plug that looks like the plug illustrated below. Have sure that the appliance is connected to an outlet having the same configuration as the plug. No adaptor should be used with this appliance.

2. DO NOT increase. To adjustment of electric shock, one only or

Superimplied by Dean.

1. DO NOT USE ITEMS IN THE ITEMS.

2. DO NOT USE ITEMS OF THE ITEMS.

3. Rating the brushed per salt temperature value.

4. Toxid repeated strokes over the same area, to help present

damage to berber carpets.

1. Credit manufacturers lag prior to closing and high for any quarter to clearing grounders. We do not recommend zero trading directly has included a net outlook, split, or even up. The global best manufacturer's bank

2. DO NOT store unit, where temperatures reach heading levels to avoid damaging internalairs.

3. FIRST AND KEEP OUT OF MATH OF CHILDREN. Grasses skin and sashes eye infarction. IF IN EYES, rinse contoured with water for minutes. Remove contact lenses. If present and easy to do so. Continue finding. IF OK SHIM, wash with soap and water. If in and eye in billion pixels, seek medical attention. Please receive container. If space of contact lenses are with a cover and above disposed the mask container with the requirements of the oral waste disposal author to.

4. DO NOT dispose in trend of watercourses in concentrate form.

ASSEMBLY

Note: When assembling your CarpetXpert, there may be a little water in or around the water tanks. This is because we test all units before shipping to ensure the highest quality.

1. Insert pole into the top of unit until it clicks into place (fig. 1). Make sure the pole is properly installed to prevent it from falling out during use.
2. Store the hose-cleaning tool by clipping it onto the pole (fig. 2).
3. Attach 3.5" hand tool to crevice tool, or store it on the tool holder (fig. 3, 4).
4. Be sure the rubber seal is seated in place under the dirty water tank (fig. 3)
5. Install the dirty water tank by placing the bottom on the nozzle lip (fig. 6) then tilting it forward until it clicks into place.

fig.1

fig. 3

fig. 5

fig. 6

HOSE ASSEMBLY

Insert hose slightly into back
of unit until it clicks twice to

TIP: Wrap hose tightly, leaving no slack

Time opening.

Less noise into security, the

Align the grooves in the hard tool with the grooves in the holder, then slice the tool down to attach.

SHARK® SOLUTIONS AND TANKS

The CarpetXpert™ tanks are designed to work with Shark cleaning solutions. To order refills, scan the QR code located on the bottom of the CarpetXpert Tank. Do not use third party or homemade cleaners.

+ Shark Deep Clean Pro For deep-cleaning carpets with the brushroll. - Shark OXY Multiplier: Dispensed from the StainStriker tank. Combines with Deep Clean Pro from the CarpetXpert Tank to be used at the hand tool for stain cleaning.

Filling the CarpetXpert Tank (top clear tank)

1. Lift the CarpetXpert Tank by the handle to detach IL then

remove the cap.

1. Add warm water to the tank up to the WATER fill line. Do not

use water hotter than 140°F (60°C).

1. Add Shark Deep Clean Pro up to the CONCENTRATE

fill time.

1. Reattach cap, then reinstall the CarpetExpert Tank.

Filling the StainStriker Tank (smaller, blue tank)

1. Lift the StainStriker Tank by its sides to detach it, then remove

the cap.

1. Add Shark OXY Multiplier up to the MAX FILL line

2. Reattach cap, then reinstall the StainStriker tank.

CLEANING WITH CARPETXPERT

DEEP CLEANING with the brushroll: Uses Deep Clean Pro Formula and water

Important: Vacuum with traditional vacuum cleaner first, especially pet hair. CarpetExpert is

not designed for dry vacuuming.

1. Move the selector lever to UP position to use brushroll

2. Gently step on the base and till the handle back

3. Press power button; unit will enter Deep Clean Mode.

4. Move unit towards; it will automatically discharge waste

5. Move Unit to March. It will automatically dispense Water and Deep Clean Pro formula.

6. Move back to dry with suction only (does not dispense fluid on

back stroke)

1. Repeat steps 4 and 5 on the same area once.

QUICK DRY MODE

Avoid over-cleaning the same spot in Deep Mode to prevent saturated carpets and long dry times. Drying may take a few hours.

Once deep clean is complete, press the Mode button to activate Quick Dry Mode. Repeated passes in Quick Dry Mode will reduce dry time.

Rinsing: Some users may want to rinse their carpet after cleaning. To do this, fill

CarpetXpert Tank with only water, and repeat cleaning steps.

STAIN CLEANING with the hand tool:

Uses Deep Clean Pro Formula + OXY Multiplier

1. With the unit in upright position, unwrap hose, and push the

selector over DOWN until it clicks into place.

1. Suction up any wet mess, then spray the stained area (fig. 1)

Scrub the stain with the bristles (fig. 2), then tilt the hand

tool up (fig. 3) and drag it across the stained area to extract the mass. Dragot is ordered. If steam is dry, first branch up the

the idea, repast + deaix. If stain is dry, that break up the slay with the brays and suction up.

The 3.5" Hand Tool is for general stain cleaning, while the Crevice Tool is intended for light spaces like corners. The rubber side of the reversible bristles is intended for softer fabrics and only to be used with fluid, not dry. The 7" Hand Tool (included in some models) is intended for larger areas like sole cushions or stairs.

The Shark Pet Tool is included with select models. The tool extracts wet pat masses, while preventing the mass from reaching the hose and the interior of the unit. Use on wet pat masses only. DO NOT use the tool to remove pat walls. To use, first carry the wet mass, then extract it with the Pet Tool. DO NOT exceed the MAX FILL line on the Pet Tool cup. Keep the tool level without tipping, to prevent the mass from reaching the hose.

After use, turn off the CarpetXpert power and empty the Pat Tool cup into a toilet. Wash the cup filter, and the rest of the too thoroughly with soap and water after every use time. To avoid oversatantizing, do not overspray.

EX201IB_MP_Mv21

INDICATOR LIGHTS

MODES

Blue (Left): Deep Clean Mode (brushroll at floor nozzle).

Blue (Right): Quick Dry Mode (brushroll at floor nozzle).

Both Green: StainStriker (st hand tool).

NOTIFICATIONS

Red: Brushroll jam. Remove obstruction, then reinstall brushroll.

Flashing Blue: The dirty water tank is full. Empty the tank, then reinstall it.

Flashing Red: Brushroll cover open. Close cover.

Flashing Green: The selector lever is in the wrong position. Move lever UP to clean with brushroll. Move lever DOWN to clean with the hand tool.

MAINTENANCE

Clean unit after every use to avoid odors, bacteria, and mold.

Note: When turning off the power, it may take 2 to 3 seconds for the unit to clear the lines and power down completely.

DIRTY WATER TANK

Note: You will hear a change in motor noise/air flow when the dirty water tank is full

1. Press the release button and remove the tank.

2. Lift out inner float mechanism. DO NOT pour out dirty water until float is

removed.

1. Pour dirty water down drain

2. Remove the filter cover, then lift out the filter. Wash the filter with soap and

water, then allow it to air-dry completely before reinstalling.

BRUSHROLL

1. Pull latch to remove top brushroll cover

2. Lift brushroll door to open.

3. Remove the brushroll by pulling up on the side lab. If hair is wrapped, cut it away by running scissors along the groove in the brushroll. Wash brushroll, cover, and doors and allow them to air-dry before reinstalling.

4. To reinstall the top brushroll cover, connect the 2 hooks at the bottom, then push forward until it clicks into place.

graph TD
    A["1: Top view"] --> B["2: Left side, orange arrows indicate rotation"]
    B --> C["3: Right side, orange arrows indicating clockwise rotation"]
    C --> D["4: Bottom view with arrow indicating rotational motion"]

HAND TOOLS

Press the release button to detach tool. Pull tab to remove window and bristle strip. Wash tools with soap and water and allow them to air-dry before reinstalling.

HOSE

Attach the hose-cleaning tool to the end of the crevice tool and turn on power. Point tool to the floor, pull the trigger, and the cleaning solution will be sucked into the hose to clean the interior.

Two-step diagram showing a tool being inserted into a device, with no visible text or symbols.

TROUBLESHOOTING

CHECKING FOR DEBRIS

Note: You will hear a change in motor noise/air flow when the dirty water tank is full.

To check airpath for clogs, hair, or debris:

1. Unplug unit

2. Remove dirty water tank.

3. Remove seal (fig. 7).

4. Detach the hose (fig. 8)

5. Remove the selector lever by pushing it all the way forward (fig. 9), then

pulling it out sideways (fig. 10).

1. Remove any debris.

2. Reattach parts.

Four-step diagram showing a robotic arm and a mechanical device, illustrating the process of tool manipulation (no text or symbols present)

fig. 7 fig. 8
fig. 9
fig. 10

Leaking: Be sure the hose is assembled and connected properly and the caps on the tanks are tightened.

Poor suction: See Checking for Debris section, and be sure hose, dirty water tank, and seal under dirty water tank are all connected properly. Make sure the hose clicks twice when attaching to the body.

Hand tool not spraying: Be sure lever is in down position and tanks are full

Floor nozzle not dispensing solution: Be sure lever is in the up position and tanks

are full.

Oxy Multiplier is not being dispensed: Be sure tanks are attached securely. Note

The StainStriker tank dispenses at a slower rate than the CarpetXpert Tank.

Shark|NINJA

FIVE (5) YEAR LIMITED WARRANTY

FIVE (5) YEAR LIMITED WARRANTY

The Five (5) Year Limited Warranty spokes to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage spokes to the original owner and to the original product only and is not transferable.

SharkNinge warrants that the unit shall be free from defects in materials and workmanship for a period of five (5) year from the date of purchase when it is used under normal household conductors and maintained according to the requirements outlined in the Owner's Guide subject to the following conditions and exclusions:

What is covered by this warranty?

1. The original unit and/or non-wearable parts deemed defective. In Shark Ninja's sole discretion, will be recurrent or replaced up in law (3) year, your low-annual survey date.

2. In the event a replacement unit is issued, the warranty coverage ends x (6) months following the

receipt, date of the replacement unit, or the remainder of the existing warranty, whichever is later. ShareNlear receives the note by replacing the unit, such one of equal or equal value.

What is not covered by this warranty?

1. Normal wear and tear of wearable parts (such as Shark Cleaner, Pad, etc.), which require regular

maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at shodaccessodes.com

1. Any unit that has been jampered with or used for commercial purposes

2. Damage caused by misuse, abuse, negligent handling failure to perform required maintenance or

3. Consequential and incidental damages

4. Defects caused by repair persons not authorized by SharkNliva. These defects include damages caused

In the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the

Repair is performed by a repair person. Not authorized by Shankinja. 6. Products purchased used or sold with products North America.

How to get service

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit sharkocean.com/support for product care and maintenance self help. Our Customer Service Specialists are also available at 1-800-798-7398 to assist with product support and warranty services and other products.

options, including the necessity of upgrading to our V4-warranty service options for street product categories. So we may better assist you, please register your product online at registryourshank.com and have the product on hand when you call. Shankbinja will cover the cost for the customer to send in the credit to us for repair or replacement. A fee of \$25.35 (subject to change) will be charged when Shankbinja shifts the repairs or replacements unit.

How to initiate a warranty claim

You must call 1-800-798-7598 to initiate a warranty claim. You will need the receipt as proof of purchase. We also ask that you register your product online at registryyourshark.com and have the product on hand when you call, so we may better assist you. A Customer Service Specialist will provide you with return and packing instruction information.

How state law applies

This warranty gives your specific legal rights, and you also may have other rights that vary from state to state. Some states do not permit the exclusion or limitation of incidental or consequential so the above might not apply to you.

This product may be covered by one or more U.S. patents. See sharkinhu.com/patents for more information. Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change without notice.

© 2023 SharkNinja Operating LLC. SHARK is a registered trademark of Shark Ninja Operating LLC. STAINS RIKLR is a trademark of Shark Ninja Operating LLC