KMS-910 - Karaoke YAMAHA - Gratis brugsanvisning og manual

BRUGSANVISNING KMS-910 YAMAHA

Thank you for selecting the Yamaha Karaoke Speaker System.

PRECAUTIONS

Read this before using the speaker.

• To avoid the force performance, please read this manual carefully. Keep it in a wife place for future reference.
• Install the speaker in a cool, dry, clean place - away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humanizing transformers, motors. To prevent fire or electrical shock, do not expose the speaker to mine or water.
  • To prevent the enclosure from warping or discoating, do not place the speaker where it will be exposed to direct sunlight or excessive humidity

• Do not place the following objects on the speaker: Glass, china, etc.

• It glass etc. fails by vibrations and breaks, it may cause personal injury.
  A cutting candle etc.

• If the needle falls by silenions, it may cause fire and personal injury.
  A vessel with water in it
• If the vessel falls by vibrations and water spills, it may cause damage to the speaker, and/or you may get an electric shock.
• Do not place the speaker where foreign objects such as water drives might fall. It might cause a fire, damage to the speaker, and/or personal injury
• Domest place for speaker when it is table to be knocked over or struck by falling objects.
  Slacker plasement will also ensure better sound performance.
• Taking the speaker of the same skill or how to the initiative can result in feedback.
• Never put a hand or a foreign object into the port located on the rear of the speaker as this
  might cause perinatal injury and/or damage to the speaker. When using its speaker, they hold the part of it might

• When having the questions, as the time is [part of high time (personality) thickness to the speaker.

• Any time you note discontinu, reduce the volume control on your amplifier in a lower setting.
  Never show your ampience in the order this tipping. Therefore the exterior only is a amount

• When using an amplifier with a rated output power higher than the nominal input power of
  He speaker, care should be taken never to exceed the speaker's maximum input. He not attempt to clean the speaker with chemical solvents as this might damage.
  The clean dry cloth
• Do not attempt to modify or fix the cyanon. Contact qualified Yambe service personnel, when any service is available. The meeting includes near a general for up means.
  • As this year is heavy, whenever it is moved, two people are required to transport it safely.
• Place the speaker away from a TV. If tor, the TV screen may becomeurred
  * When choosing a power amplifier for use with the device, made sure that the output power of the amplifier is lower than the power capacity of this device. Multifunction or fire may occur.
• Even if the output power of the amplifier is lower than the power capacity of this device
  [1] P. M. and J. C. are the most severe high words, resulting chipping may cause damage to the design. Malfunction or fire may occur especially when the following sounds or sounds are appreciated:
  feedback, when using a microphone

concerns and extreme volume sound from a musical instrument

extreme periodic industrial costs

• more caused by phingopurposing the value while the unghiter is based on
• Secure placement or installation to the owner's responsibility. Yansal
  Not be liable for any accident caused by improper placement or installation of
  the speaker.

MOUNTING THIS SPEAKER SYSTEM TO A CEILING

You can also use the screw holes on the top of the speaker for installing the speaker on the ceiling by using commercially available mounting brackets. To fix the speaker to a mounting bracket, use the screws inserted to the screw holes of the speaker as the factory default status. If you use the commercially available screws, use the screws that matches to the following specifications. Screw type .......M8 Screw length .......35 mm or more 100 mm

Caution

• The required length of a screw differs depending on the mounting bracket to be used. Select a screw which is suitable for use with the mounting bracket and can be fully inserted into the hole on the speaker.
• As this product is heavy, do not attach them to thin pyramids or soft wall surface materials, as the screws may tear tree from flinty surfaces, causing the speakers to fall and be damaged, or result in personal injury.
• Do not fasten the speakers to the ceiling, with nails, adhesives, or other unsoamed hardware. Long-term use and vibrations may cause them to pull free.
• To avoid accidents resulting from tripping over loose speaker cables, fix those to the wall along with the speakers.

REMOVING THE FRONT COVER

① Remove the screws (4 pieces) from both sides (Figure ①).

② Grasp the front cover with your fingers with your thumbs at the top edge
of the main unit, then gently push with your thumb (figure 2) to pry the
cover loose. Do the same for the bottom edge. ⑤ Pull the cover straight end from the swasket (Figure 5).

①

2

To reatbelt, do these steps in reverse order. The 4 pegs inside the cover should be set in the corresponding holes on the speaker.

Note

Be careful not to scratch yourself with the edge of the front cover.

Diagram showing a hand holding a small component next to a speaker unit (no text or symbols present)

SPECIFICATIONS

Type: 2-way 3-speaker box reflex speaker system

Driver 7.7 cm (5") cone type twaster x 2

7.7 cm (3") core type: bwater × 2

20 cm (8") cone type woofer

Impedance S (ohm)
Frequency response 52 Hz to 20 kHz (10 dB)
KMS-109 05 L2 10-20 MHz (-10 GB) Rated input power 150 W
80 W
Maximum input power 450 W
240 W
Crissence frequency 2.5 kHz, 15 kHz 2.4 kHz, 15 kHz

Dimensions (W × H × D) 501 × 320 × 318 mm

452 x 259 x 284 mm

Wengli 12.2 kg 8 km

（1）《证券时报》及《中国证券报》

• Specifications are subject to change without notice due to product
  improvements.
• Cure should be taken not to exceed the input power values noted above.
  • The woofer employs a material for the surround to achieve high sound
  quality. The useful life of the speaker surround depends on usage conditions.
  and environment (especially ultraviolet radiation exposure and humidity).
  etc. When the speaker surround reaches the end of its useful life, refer to your
  dealer for replacement.

Caution

BEFORE MAKING CONNECTIONS, MAKE SURE THAT THE AMPLIFIER IS SWITCHED OFF.
Connect the cables as shown below.

graph TD
    A["Left speaker"] --> B["Speaker system"]
    B --> C["Speaker output terminals of the amplifier"]
    D["Right speaker"] --> B
    E["Black"] --> F["T-junction"]
    G["Red"] --> F
    H["Terminal 1"] --> I["Terminal 2"]
    J["Terminal 3"] --> K["Terminal 4"]

Notes

• Do not let the bare speaker wires touch each other as this could damage the speaker or the amplifier, or both.
• Do not insert the insulation into the hole. Sound may not be produced.

■ When using a banana plug

Note

Use a suitable instrument to remove the cover. Removing it with your bare hands may hurt your fingertips

B

[Non-Text]

[Non-Text]