PXJSS-600U - Piła Ozito - Bezpłatna instrukcja obsługi

INSTRUKCJA OBSŁUGI PXJSS-600U Ozito

Service information

We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.

Category Example
Wear parts' Guice roller, Battery, Splinter guard
Consumables' Raw blade
Missing parts

* Not necessarily induced in the scope of delivery!

In the effect of defects or faults, please register the problem on the internet at www.so-gmbh.info. Please ensure that you provide a precise description of the problem and answer the following questions in all cases:

• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)? Describe this malfunction.

Declaration of confirmity

Cordless Jigasw PXJSS-500U / Fast Charger PXCG-030U (Qdio)
2014/25/EU	2009/42/EC
2005/82/EC_2006/125/EC	Annex IV
2014/85/EU	Annex IV and Annex V
2005/85/EC	Annex V and Annex W
2014/207/EU	2009/14/EC_2005/86/EC
2014/207/EU	Annex V
2014/52/EC	Annex V
2014/85/EU	2009/14/EC_2005/86/EC
90/99/EC_2006/142/EC	2004/25/EC
80/89/EC_90/89/EC	2004/25/EC
2014/85/EU	2009/14/EC
90/99/EC_2006/142/EC	2004/25/EC
80/89/EC_90/89/EC	2004/25/EC
2014/85/EU	2009/14/EC

PXJSS-600U

GB Additional operating & safety Instructions Cordless Pendulum Jigsaw

Line drawing of a mechanical device with no visible text or symbols

Danger! Read the operating instructions to reduce the risk of inquiry

Caution! Wear car-muffs. The impact of noise can cause damage to hearing.

Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos!

Caution! Wear safety goggles. Sports generated during working or spirilers, chips and dust emitted by the device can cause loss of sight.

[→图]→

Store the battery only in dry rooms with an ambient temperature at +10°C to -40°C. Place only charged batteries in storage (charged at least 40%). (not included in delivery)

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of the ISC GmbH.

Subject to technical changes

Items supplied

Please check that the article is complete as

specified in the scope of delivery. If parts are

Missing, please consult our service center of the

sales bullet where you have your purchase at

the latest within 5 working days after purchasing the product and two representations of a valid bill.

the product and upon presentation of a valid link of purchases. Also, refer to the property herein in

of purchase. Also, refer to the warranty table in

the service information at the end of the operating

1. Open the packaging and /tray w/ the origin

- Open the packaging and take out the equipment with care

• Remove the

Remove the (package) of materials and a plant packaging and/or transporting humpers.

packaging at (if available)

- Check to see if all home are supplied

- Onlook to see that home are copied. - respect the equipment and accessories.

Inspect the equipment and accessories for transport damage.

• It possible please

the end of the guarantee period

Battery and charger sold separately.

This tool is compatible with all 18V battery and

chargers from the Power X Change range.

Danger!

The equipment and packaging material are

not toys. Do not let children play with plastic

bags, foils or small parts. There is a danger of swallowing or suffocating!

Proport use

The Upsew is designed for sawing wood, metals.

non-ferrous metals and plastics using the appro

rlette saw blade.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a

case of misuse. The user/operator and not the

manufacturer will be liable for any damage or injury

ries of any kind caused as a result of

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

machine is used in commercial, trade or industry

businesses or for equivalent purpose

Technical data

Motor power supply: 18 V DC

Stroke speed: 0 - 2,400/min

Stroke height: 25.4 mm

Cutting depth, wood: 80 mm

Cutting depth, plastic: 12 mm

Cutting depth, titaniumium: 17 mm

Sailing atpim, 10th Naimi fami. ......... Tu mi n

After cut: up to 47° (left and right)

Weight: 1.8 kg

Danger!

Sound and vibration

Sound and vibration values were measured in

accordance with EN 60745.

L_out sound pressure level 84 dB(A)

K. uncertainty 3 dB

L- sound power level 95 dB(A)

K. unconsistently 3dB

Wear ear-muffs.

The impact of noise can cause damage to heat

ring.

Total vibration values (vector sum of three direc-

(ons) determined in accordance with EN 60745.

Sawing particleboard

Vibration emission value a _s = 7.417 m/s ^2

K uncertainty = 1.5 m/s ^2

Sewing sheet metal

Vibration emission value a, = 2.619 m/s

Kuncertainty = 1.5 m/s

The specified vibration value was established in

accordance with a standardized testing method. It

may change according to how the electric equip-

ment is used and may exceed the specified value

in exceptional circumsta

The specified vibration value can be used to

compare the equipment with other electric power

The specified vibration value can be used for infi-

al assessment of a harmful effect.

Keep the noise emissions and vibrations to a

minimum.

- Only use appliances which are in perfect wor-

king order.

• Service and clean the appliance regularly.

* Adapt your working style to suit the appliance.

- Do not overload the appliance.

• Have the appliance serviced whenever

necessary

* Switch the appliance off when it is not in use.

- Wear protein

Caution

Residual risks Even if you live

Even if you use this electric power tool in ac-

cordance with instructions, certain residual risks cannot be done out. The following be

Risks cannot be rules out. The following has made more orders in connection with the avix

Zards may arise in connection with the equipment's construction and layout:

1. Una damage if no suitable protective dust

magic is used

1. Damage to bearing if no suitable ear protecti

2. Exchange is nothing. We remain our protection on is used.

3. Health damage caused by hand-arm vlova-

tions If the equipment is used over a pro-

longed period or is not properly guided and

maintained.

For EU countries only

Never place any electric power tools in your

household refuse.

To comply with European Directive 2012/19/EC

concerning old electric and electronic equipment

and its implementation in national laws, old elec-

Iric power tools have to be separated from other

waste and disposed of in an environment-friendly

Recycling alternative to the return request:

As an alternative to returning the equipment to

the manufacturer, the owner of the electrical

equipment must make sure that the equipment

is properly disposed of if he no longer wants to

keep the equipment. The old equipment can be

returned to a suitable collection point that will

dispose of the equipment in accordance with the

national recycling and waste disposal regulations

This does not apply to any accessories or aids

without electrical components supplied with the

old equipment.

This consignment contains lithium-ion batteries.

In accordance with special provision 188 this

consignment is not subject to the ADR regura-

tions. Handle with care. Danger of Ignition in case

of damage to the consignment package. If the

consignment package is damaged: Check and

If necessary repackage. For further information

contact: 0049 1807 10 20 20 66 (fixed network

14 cmin, mobile phone max. 42 cmin; Outside

Germany charges will apply instead for a regular call to a landing number in Germany.

Charger indicator / Fast Charger

Indicator status		Explanations and actions
Red LED Green LED
Off Flashing Ready for use		The charger is connected to the mains and is ready for use; there is no battery pack in the charger
On Off Charging		The charger is charging the battery pack in quick charge mode.
Off On The battery is 85% -100% charged and ready for use.(Charging time for 1.5 Ah battery: 30 min)(Charging time for 2.0 Ah battery: 40 min)(Charging time for 3.0 Ah battery: 60 min)(Charging time for 4.0 Ah battery: 80 min)(Charging time for 5.0 Ah battery: 105 min)Action:Take the battery pack out of the charger. Disconnect the charger from the mains supply.
Flashing Off Adapted charging		The charger is in generic charging mode.For safety reasons the charging is performed less quickly and takes more than 1 hour. The reasons can be.- The battery pack has not been used for a very long time or an already fat battery was further discharged (extrastative discharge).- The battery pack temperature is outside the local range (between 25°C and 45°C).Action:Wait for the charging to be completed; you can still continue to charge the battery pack.
Flashing Flashing Fault		Charging is no longer possible. The battery pack is defective.Action:Never charge a dotective battery pack.Take the battery pack out of the charger.
On On Temperature fault		The battery pack is too hot (e.g. due to direct sunshine) or too cold (below 0°C).Action:Remove the battery pack and keep it at room temperature (approx. 20°C) for one day.