The fans vibrate but do not turn, the LED lighting flickers weakly, and the cooling is less effective

Question

Accepted Answer

These symptoms indicate an electrical or mechanical problem that requires professional intervention. Here’s what you should check first:

Quick Checks

Power Supply: Ensure that the device is receiving a stable voltage. A drop in voltage can cause erratic fan behavior and LED flickering.
Unplug and Wait: Turn off the wine cellar, unplug it for 2 minutes, then plug it back in. This resets the electronic circuit.
Visually Inspect the Fans: Check that no debris is blocking the blades. Even a small obstruction can prevent rotation while causing vibrations.

Possible Causes

The flickering of the LED display combined with the failing fans suggests:

A failure of the electronic control circuit or a loose connection
A stuck or worn fan motor that is trying to turn but cannot
A defective temperature or airflow sensor that disrupts regulation

Next Steps

If the above checks do not resolve the issue, contact Scandomestic customer service:

Phone: +45 72 42 55 71
Website: www.scandomestic.dk

Keep your serial number (visible on the back of the device) and mention exactly when the problem started. If the device is under warranty, a free repair or replacement may be possible.

User manual Scancool Wine cellar : user manuals and guides in PDF

Models Scancool Wine cellar most viewed

Other categories Scancool

Recent questions about Wine cellar Scancool