Question 1

How do I set the clock on the LOFRA RNMG96MFT/CI cooker?

Accepted Answer

To set the clock on your LOFRA RNMG96MFT/CI cooker, you need to use the manopola (rotary knob) of the cooking programmer:

Accessing the time setting mode:

Press the manopola of the programmer 4 times in succession until the "OROLOGIO" (clock) icon starts blinking on the screen.

Setting the time:

Once the blinking OROLOGIO icon appears, turn the manopola clockwise to increase the hour or counterclockwise to decrease it.
The minute hand moves in 1-minute intervals, allowing for precise adjustment.
Continue turning until you reach the exact desired time.

Confirming the setting:

The setting is automatically confirmed after 10 seconds without action. After this time, the timer will automatically exit the setting mode and display the time on the dial.
You can also press the manopola to immediately confirm the setting if you do not wish to wait for the 10 seconds.

Important note: In case of a power outage, the OROLOGIO icon blinks to indicate a loss of power. Check that the time is correct after a power cut or quickly press the manopola to disable this alert.

Question 2

How to correctly set the heating time with the clock on the LOFRA RNMG96MFT/CI stove?

Accepted Answer

Your LOFRA RNMG96MFT/CI stove features an electronic timer that can function as a timer or as a cooking stop timer. Here’s how to correctly set the heating time:

To use the timer as a timer or alarm:

Press the + or - buttons on the timer to access the programming mode. The timer display lights up and starts blinking, indicating "00".
Set the desired duration in minutes (from 1 to 99 minutes) using the + button to increase or - to decrease. You can press quickly several times or hold the button down to increase the value faster.
For quicker adjustments, press the button twice quickly to jump in 5-minute intervals.
After 10 seconds without action, the timer automatically programs itself with the selected duration.

To associate the timer with a specific burner (automatic shut-off):

First, select the desired cooking burner on the front before programming the timer.
Press the + or - buttons on the timer and set the duration in the same way as indicated above.
When the time runs out, the associated burner will automatically turn off and a beep will sound for about 1 minute.

Canceling the timer:

To cancel the programming, press the - button on the timer until "00" is displayed or simply turn off the relevant burner.
You can also touch any sensor to turn off the blinking timer display.

The clock on your LOFRA RNMG96MFT/CI stove thus allows for precise management of cooking times, with the possibility to program an automatic shut-off for each burner or simply to use an alarm to remind you of the end of the allotted time.

User manual LOFRA Cooker : user manuals and guides in PDF

Models LOFRA Cooker most viewed

Other categories LOFRA

Recent questions about Cooker LOFRA