Why won't the gas burners light on my AMANA AGR6603SFS?

Question

Accepted Answer

If the gas burners on your AMANA AGR6603SFS stove do not light, follow these checks in order:

Essential Checks

Power Supply - Ensure that the stove is plugged into a grounded 3-prong wall outlet
Circuit Breaker or Fuse - Check that no fuse has blown and that the circuit breaker has not tripped
Gas Shut-off Valve - Make sure the gas shut-off valve is in the open position
Burner Cap Positioning - Check that the caps are properly positioned and securely tightened on the burner bases. Improper positioning prevents the spark from igniting the gas.

Normal Ignition Delay

According to the manual for the AGR6603SFS model, the flames should ignite within 4 seconds after turning to the LITE position. During the first ignition, the delay may be longer as air remains in the gas piping - this is normal.

Manual Ignition

If the electronic ignition does not work, you can manually light the surface burners by holding a lit match near the burner while turning the control knob to LITE.

If the flames remain unstable or do not appear after these checks, contact an authorized repair service.

User manual AMANA Cooker : user manuals and guides in PDF

Models AMANA Cooker most viewed

Other categories AMANA

Recent questions about Cooker AMANA