How to use the clock system of the Cambridge Audio AZUR 340T without a remote control?

Question

Accepted Answer

The Cambridge Audio AZUR 340T does not have clock controls on the front panel. According to the official manual, the clock system can only be set manually via the provided remote control. The front panel only has buttons for frequency selection (FM/AM), presets, and audio modes, but no clock functions.

Automatic setting via RDS: The best alternative without a remote control is to let the clock set itself automatically. Connect to an FM station with RDS signal (about 80% of FM stations offer this feature in France). The manual confirms: "The user can either allow RDS transmissions to automatically set the time and date or manually set the clock." As soon as you receive a good quality RDS signal, the AZUR 340T will automatically synchronize the time and display it in standby mode.

Time display: When you place the tuner in standby (press Standby/On), the time and date will be displayed on the digital screen if RDS mode is activated and an RDS station has been previously received. This allows you at least to check the time without a remote control.

In case of loss of the remote control: For manual clock setting, you will need the provided Cambridge Audio remote control or a compatible remote. Cambridge Audio recommends contacting an authorized dealer to obtain a replacement remote. You can also check the website www.cambridge-audio.com for available accessories.

User manual CAMBRIDGE AUDIO Radio tuner : user manuals and guides in PDF

Models CAMBRIDGE AUDIO Radio tuner most viewed

Other categories CAMBRIDGE AUDIO

Recent questions about Radio tuner CAMBRIDGE AUDIO