Q: How to resolve the 'connected but unavailable' issue with the DJ Console 4-MX on my computer?

If your computer indicates that the DJ Console 4-MX is connected but unavailable , it means that the device is recognized but cannot be used properly. Here are several steps to resolve this issue: 1. Check physical connections Make sure the USB cable is properly connected to both the DJ Console 4-MX and the computer. Try another USB port on your computer to rule out a faulty port. If possible, test with another compatible USB cable. 2. Restart the computer A simple restart can sometimes resolve temporary conflicts related to USB devices. 3. Check and update drivers Open the Device Manager (on Windows) and check for the DJ Console 4-MX under the Universal Serial Bus controllers or Audio, video and game controllers categories. If a yellow exclamation mark appears, it indicates a driver issue. Download and install the latest version of the drivers specific to the DJ Console 4-MX from the official Hercules website. If the drivers are already installed, try uninstalling them and then reinstalling them properly. 4. DJ software configuration Open your DJ software and check in the settings that the DJ Console 4-MX is selected as the audio device and MIDI controller. Make sure the software is up to date to ensure compatibility with your hardware. 5. Other tips Temporarily disable any other USB audio devices that might create a conflict. Test the console on another computer to check if the problem comes from the PC or the console itself. By following these steps, you should be able to resolve the 'connected but unavailable' connection issue with the DJ Console 4-MX. If the problem persists, it may be helpful to contact Hercules technical support for personalized assistance.

Question 1

How to resolve the 'connected but unavailable' issue with the DJ Console 4-MX on my computer?

Accepted Answer

If your computer indicates that the DJ Console 4-MX is connected but unavailable, it means that the device is recognized but cannot be used properly. Here are several steps to resolve this issue:

1. Check physical connections

Make sure the USB cable is properly connected to both the DJ Console 4-MX and the computer.
Try another USB port on your computer to rule out a faulty port.
If possible, test with another compatible USB cable.

2. Restart the computer

A simple restart can sometimes resolve temporary conflicts related to USB devices.

3. Check and update drivers

Open the Device Manager (on Windows) and check for the DJ Console 4-MX under the Universal Serial Bus controllers or Audio, video and game controllers categories.
If a yellow exclamation mark appears, it indicates a driver issue.
Download and install the latest version of the drivers specific to the DJ Console 4-MX from the official Hercules website.
If the drivers are already installed, try uninstalling them and then reinstalling them properly.

4. DJ software configuration

Open your DJ software and check in the settings that the DJ Console 4-MX is selected as the audio device and MIDI controller.
Make sure the software is up to date to ensure compatibility with your hardware.

5. Other tips

Temporarily disable any other USB audio devices that might create a conflict.
Test the console on another computer to check if the problem comes from the PC or the console itself.

By following these steps, you should be able to resolve the 'connected but unavailable' connection issue with the DJ Console 4-MX. If the problem persists, it may be helpful to contact Hercules technical support for personalized assistance.

Question 2

How to connect the Hercules DJ Console 4-MX to a PC without using an installation CD?

Accepted Answer

To connect your Hercules DJ Console 4-MX to a PC without an installation CD, you need to download the drivers from the official Hercules support website, as the console is powered by USB bus and requires drivers to function properly.

Go to the official Hercules support page dedicated to the DJ Console 4-MX where compatible drivers for your operating system are available. Download the HDJCSeries driver corresponding to your version of Windows (versions 2023.HDJS.2 and earlier are available depending on your system). Save the downloaded file to your computer and launch the installation program by double-clicking on it. Follow the on-screen instructions to complete the driver installation.

Then plug the DJ Console 4-MX into a USB port on your computer (USB 2.0 recommended or USB 1.1). No external power supply is needed as the console is powered directly by the USB port. Windows will automatically detect the console and finalize the driver installation. The icon for the DJ Console 4-MX will appear in the Windows taskbar, indicating that the console is installed and ready to use. This process may take a few minutes depending on the power of your computer.

The DJ Console 4-MX includes VirtualDJ DJC Edition with the provided license. To use your console, launch VirtualDJ and enter the serial number found on the sticker with the barcode located on the back of the console. You can also use other compatible DJ software such as Traktor Pro, Serato DJ, or Djay Pro. In the audio or controller settings of your DJ software, ensure that the Hercules DJ Console 4-MX is correctly recognized.

You can check for available updates for your console by accessing the control panel of the DJ Console 4-MX (via the icon in the taskbar). Click on the update check tab to automatically download and install the latest drivers if a newer version is available. An active Internet connection is required for this operation.

Note that the DJ Console 4-MX has a hot-plug USB connection feature: you can plug and unplug it at any time, even when your computer is on. However, avoid unplugging it while playing or recording music, otherwise the application will stop and an error message will appear.

User manual HERCULES DJ Controller : user manuals and guides in PDF

Models HERCULES DJ Controller most viewed

Other categories HERCULES

Recent questions about DJ Controller HERCULES