Question 1

Why does my BERNINA 1005 sewing machine always make a straight stitch even when I set it to stitch 6 (zigzag stitch)?

Accepted Answer

If your BERNINA 1005 sewing machine continues to make a straight stitch while you have selected stitch 6, which corresponds to the zigzag stitch, several causes may explain this problem:

1. Check the stitch selector

Make sure that the stitch selector is properly positioned on stitch 6. Sometimes the selector may not be fully engaged, which prevents the machine from changing the stitch type.

2. Check the presser foot

To create a zigzag stitch, it is important to use an appropriate presser foot. A standard presser foot for straight stitches may prevent the correct formation of the zigzag stitch.

3. Adjust the stitch width

The zigzag stitch requires an adjustment of the stitch width. Check that the width is not set to zero or a value that is too low. A width generally between 3 and 5 mm allows the zigzag stitch to execute correctly.

4. Inspect the mechanism

A blockage or mechanical malfunction may prevent the machine from executing the zigzag stitch. Check that nothing is obstructing the mechanism and that the machine is well maintained.

5. Test on different fabrics

Some fabrics may influence the behavior of the machine. Try sewing on a different fabric to see if the problem persists.

By following these tips, you should be able to resolve the issue and achieve the desired zigzag stitch with your BERNINA 1005.

Question 2

How to select and adjust the zigzag stitch on a BERNINA 1005 sewing machine?

Accepted Answer

To select and adjust the zigzag stitch on your BERNINA 1005 sewing machine, follow these simple steps:

1. Identify the stitch selector

On the front panel of your machine, locate the stitch selector. It is a dial or button that allows you to choose the type of stitch to create.

2. Choose the zigzag stitch

Turn the selector until the symbol representing a zigzag stitch appears. This symbol looks like a series of zigzag lines.

3. Adjust the width and length of the stitch

Stitch width: Adjust the width to set the spacing between the zigzags. A larger width creates a wider zigzag.
Stitch length: Set the length to determine the distance between each zigzag. A shorter length makes the stitch denser.

These adjustments are usually made using dials or buttons located near the stitch selector.

4. Test the stitch

Before sewing your project, do a test on a piece of similar fabric to ensure that the zigzag stitch meets your expectations and that the settings are correct.

User manual BERNINA Sewing machine : user manuals and guides in PDF

Models BERNINA Sewing machine most viewed

Other categories BERNINA

Recent questions about Sewing machine BERNINA