What should I do if the LED lighting of my hood has become too dim?

Question

Accepted Answer

If the lighting of your Fulgor Milano F4UC30S1 hood seems less bright than before, here are the steps to check:

1. Check the general condition

The LED spots of this hood are designed to offer a very long lifespan under normal conditions. If the lights appear dim, it is often due to a buildup of dust or grease on the lighting devices.

2. Clean the LEDs

Turn off the hood and wait for it to cool down
Gently wipe the LED spots and surrounding areas with a soft, slightly damp cloth
Then dry with a dry cloth
Do not use too much water to avoid moisture infiltration into the electronic components

3. Check the operation

Turn the hood back on via its electronic control. The brightness should be restored after cleaning.

4. Replace the LEDs if necessary

If cleaning is not enough and the light remains dim, the LEDs may need to be replaced. Your manual contains detailed illustrated instructions for this operation. Note that replacement LED bulbs are not covered by the product warranty.

If you encounter difficulties, refer to the lighting section in your user manual.

User manual Fulgor Milano Kitchen hood : user manuals and guides in PDF

Models Fulgor Milano Kitchen hood most viewed

Other categories Fulgor Milano

Recent questions about Kitchen hood Fulgor Milano