How do I set the date on a Michael Kors Bradshaw MK2745 watch when the date is not updating correctly?

Question

Accepted Answer

To set the date on your Michael Kors Bradshaw MK2745 watch when it is not updating correctly, follow this precise three-step procedure:

Before you begin: Ensure that the second and minute hands of the chronograph are at the 12 o'clock position and that the chronograph is not running. If not, reset it first.

Step 1: Setting the date Pull the crown to position 2 (the first pull position). Turn it clockwise (to the right) until the date of the previous day appears in the date window. For example, if it is the 15th, set the date to the 14th. This step is important because the date change will occur automatically while setting the time.

Step 2: Setting the time Pull the crown to position 3 (pulling further) when the second hand of the chronograph is at the 12 o'clock position. The second hand will stop. Turn the crown clockwise to set the time. Keep turning until the date changes to the current day while setting the correct time. Also, make sure to set AM/PM correctly depending on whether it is morning or afternoon.

Step 3: Finalizing Push the crown back to position 1 (its normal position) to resume normal operation of the watch.

Important points: Never set the date between 9 PM and 1 AM, as the date change mechanism may not function correctly during this time frame. If the date still does not change correctly after following these steps, it may indicate a problem with the movement that requires technical revision. If in doubt, consult an authorized Michael Kors dealer or a qualified watchmaker.

User manual Michael Kors Watch : user manuals and guides in PDF

Models Michael Kors Watch most viewed

Other categories Michael Kors

Recent questions about Watch Michael Kors