What should I do if the status indicator on my SONOS BRIDGE does not light up?

Question

Accepted Answer

If the status indicator on your SONOS BRIDGE does not light up, it may indicate a power or connection issue. Here are some steps to diagnose and resolve this problem:

1. Check the power supply

Make sure the BRIDGE is plugged into a working electrical outlet.
Check that the power cable is properly connected to the device and the wall outlet.
Test the electrical outlet by plugging in another device to confirm it is working.

2. Restart the SONOS BRIDGE

Unplug the BRIDGE from the electrical outlet.
Wait about 10 seconds, then plug it back in.
Wait a few minutes to see if the status indicator lights up.

3. Check network connections

If your BRIDGE is connected via an Ethernet cable, ensure that the cable is properly connected and in good condition.
Try replacing the Ethernet cable if possible to rule out a faulty cable issue.

4. If the problem persists

If after these checks the status indicator still does not light up, it is likely that the device has a hardware defect. In this case, it is advisable to contact SONOS customer service for assistance or consider repair or replacement.

User manual SONOS Audio accessory : user manuals and guides in PDF

Models SONOS Audio accessory most viewed

Other categories SONOS

Recent questions about Audio accessory SONOS