How to clean the flue of the PANADERO NEVADA stove?

Question

Accepted Answer

To clean the flue of your PANADERO NEVADA wood stove, you need to access the flue system by following these steps:

Accessing the flue

Gently lift a side vermiculite panel to remove it.
You can then remove the flue deflector.
Proceed to clean the flue.
Reassemble the deflector and replace the vermiculite panel.

Regular maintenance

The manual specifies that at the beginning of each season, a professional must perform complete maintenance of the installation. Between professional interventions, you should:

Regularly clean the flues and check for blockages before restarting the appliance after a prolonged period of inactivity.
Daily clean the glass with a special commercial cleaner (never water) to prevent soot buildup in the flue.

Your stove has a flue outlet with a diameter of 150 mm. Note that the minimum required draft is 12.1 Pa for optimal operation.

User manual PANADERO Wood stove : user manuals and guides in PDF

Models PANADERO Wood stove most viewed

Other categories PANADERO

Recent questions about Wood stove PANADERO