User manual ElectriQ Monitor : 23 free PDF user manuals

Q: The side buttons on the monitor are not responding

The ElectriQ eiQ-15UHDPMT monitor is equipped with a rocker switch located on the side of the screen. This button controls the adjustment of volume and brightness. Troubleshooting the side buttons If the switch is unresponsive: Check for physical obstructions - Inspect the rocker switch for any dust, debris, or blockage that may be preventing its movement. Restart the monitor - Completely turn off the device, wait a few seconds, and then turn it back on. This resets the control system. Reset to factory settings - Access the menu by pressing and holding (for more than 3 seconds) the rocker switch, then follow the reset procedure described on page 6 of your manual. If these actions do not restore functionality, the side button may have a hardware defect. Contact ElectriQ support at 0871 984 4416 (Monday-Friday, 9am-5pm) to diagnose the issue or obtain a replacement.

Q: How to remove the monitor mount for wall mounting?

To remove the mount and prepare your ElectriQ eiQ-35CMUWQ100GAFSH monitor for wall mounting, follow these steps: Step 1: Remove the mount Unscrew the 5 bolts (KM4*12) that secure the mount neck and base to the monitor Once all the bolts are removed, gently lift the entire mount assembly Step 2: Prepare for wall mounting Your monitor supports a standard wall mount arm VESA 100x100mm You will need 4 bolts M6 x 10 to secure the mount arm to the VESA holes Important As this monitor is heavy, the manufacturer strongly recommends hiring a professional wall mount installer rather than doing it yourself. For any questions, contact ElectriQ support at 0871 620 1057 or visit www.electriQ.co.uk/support

Models ElectriQ Monitor most viewed

User manual ElectriQ Monitor : user manuals and guides in PDF

Models ElectriQ Monitor most viewed

Other categories ElectriQ

Recent questions about Monitor ElectriQ