Question 1

How to activate the keyless entry system on a Land Rover Discovery 4?

Accepted Answer

The keyless entry system allows you to lock and unlock your Land Rover Discovery 4 without physically using the key. To activate and use this feature, follow the steps below:

1. Check for the system

Make sure your Discovery 4 is equipped with the keyless entry system. This system is generally available on certain models and can be confirmed by the presence of a smart key or by the vehicle options.

2. Have the key nearby

For the system to work, the smart key must be in close proximity to the vehicle, usually in your pocket or bag.

3. Automatic activation

The keyless system activates automatically when the key is detected nearby. You can then:

Unlock the doors: Approach the vehicle and touch the door handle. The vehicle will detect the key and unlock the doors.
Lock the doors: When you leave the vehicle with the key, touch the outer handle to lock.

4. Starting the engine

If your Discovery 4 is equipped with a Start/Stop button, you can start the engine without inserting the key:

Press the brake pedal.
Press the Start/Stop button to start the engine.

5. Additional settings

Some models allow you to enable or disable the keyless system via the vehicle's configuration menu. Check the options in the infotainment screen under security or locking settings.

6. Troubleshooting tips

Check that the key's battery is in good condition.
Ensure that no metallic or electronic objects are blocking the communication between the key and the vehicle.
If the system does not respond, try restarting the vehicle or contact a Land Rover dealer.

By following these steps, you will be able to effectively activate and use the keyless entry system on your Land Rover Discovery 4.

Question 2

How to reset the keyless entry system on a Land Rover Discovery 4?

Accepted Answer

To reset the keyless entry system of your Land Rover Discovery 4, start by checking the battery of your smart key. Open the key using the sliding button on the side, remove the CR2032 battery, and replace it with a new battery of the same type, ensuring the positive side is facing up.

The first reset method involves disconnecting the vehicle's battery. Locate the battery under the hood of your Discovery 4, disconnect the positive (red) cable, and leave it disconnected for at least 120 seconds (about 2 minutes). This operation resets the key recognition system sensors. Then reconnect the positive cable and close the hood.

An alternative is to temporarily remove fuse number 17, located in the fuse panel next to the battery. Remove the fuse and wait about 5 minutes before reinserting it. This action resets the recognition module without fully discharging the vehicle's battery.

If after these operations your smart key is still not recognized by the system and the message "Smart Key not found" appears on the dashboard, you can use the emergency start procedure. Position the smart key flat against the side of the steering column, firmly press the brake pedal, press and release the START/STOP button of the engine, then release the brake pedal once the engine starts.

If the system still does not work after trying these resets, it may indicate an electrical problem or a malfunction of the key recognition module. In this case, consult a Land Rover dealer or a specialized automotive electrician for a more thorough diagnosis and possible reprogramming of the system.

User manual LAND ROVER SUV : user manuals and guides in PDF

Models LAND ROVER SUV most viewed

Other categories LAND ROVER

Recent questions about SUV LAND ROVER