IMETEC Hi Man HC4 100 - Beard trimmer

Hi Man HC4 100 - Beard trimmer IMETEC - Free user manual and instructions

Find the device manual for free Hi Man HC4 100 IMETEC in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice IMETEC Hi Man HC4 100 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Beard Trimmer
Brand Imetec
Model Hi Man HC4 100
Dimensions (approx.) 16 x 4 x 4 cm
Weight (approx.) 150 g
Power Supply Rechargeable battery (Ni-MH / Li-ion)
Charging Time 8 hours
Operating Time Up to 40 minutes
Cutting Length Settings Adjustable with comb attachments (1-10 mm)
Blade Material Stainless steel
Washable Removable head for cleaning under running water
Maintenance Oil blades regularly; clean after each use
Safety Features Overcharge protection; ergonomic non-slip grip
Accessories Included 3 guide combs, cleaning brush, charging adapter
Warranty 2 years

Frequently Asked Questions - Hi Man HC4 100 IMETEC

How do I charge the Imetec Hi Man HC4 100 beard trimmer?
Connect the supplied charging adapter to the trimmer and plug into a mains outlet. Charge for approximately 8 hours before first use. The indicator light will show charging status.
Can I use the trimmer while it is charging?
No, the Imetec Hi Man HC4 100 is designed for cordless use only. Do not operate while charging.
How do I adjust the cutting length?
Attach one of the guide combs to the trimmer head. The combs provide lengths from 1 to 10 mm. For a closer trim, use without a comb.
Is the blade washable?
Yes, the removable head can be rinsed under running water. Ensure it is completely dry before reattaching. The body should be wiped with a damp cloth.
How do I clean the trimmer?
Remove the head and brush away hair clippings. Rinse the head under water if needed. Apply a drop of oil to the blades after every few uses to maintain sharpness.
What should I do if the trimmer stops working?
First, check if the battery is charged. If it still doesn't work, reset by pressing the on/off button for 10 seconds. If issues persist, contact Imetec support.
Can I use the trimmer on wet hair?
The Hi Man HC4 100 is designed for dry use only. Do not use on wet hair or in the shower to avoid damage.
How often should I replace the blade?
Blades typically last 6-12 months depending on usage. Replace if you notice pulling or uneven cutting. Spare blades can be ordered from Imetec.
Does the trimmer come with a warranty?
Yes, the Imetec Hi Man HC4 100 includes a 2-year warranty against manufacturing defects. Keep your receipt for proof of purchase.
Can I take the trimmer in my carry-on luggage?
Yes, as it contains a rechargeable battery, it is allowed in carry-on baggage. Ensure it is fully charged or drained to avoid accidental activation.

User questions about Hi Man HC4 100 IMETEC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Beard trimmer in PDF format for free! Find your manual Hi Man HC4 100 - IMETEC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hi Man HC4 100 by IMETEC.

USER MANUAL Hi Man HC4 100 IMETEC

IMETEC Hi Man HC4 100 - 1

[B1] [1] [B2] [1] [C1] [1] [C2] [1] [C3] [1] [D01] [1] [D2] [1] [D3] [1] [D4]

IMETEC Hi Man HC4 100 - 3

IMETEC Hi Man HC4 100 - 4

ITALIANO

Dear customer, METEC thanks you for having purpose this product. We are certain you will appreciate five days and reliability of this appliance, designed and mustful with customer satisfaction in mind.

IMPORTANT! Instructions and warnings to a safe use

Before using this appliance, carefully read instructions and in particular the safety warnings, must be compiled with. Keep this manual and illustrate guide with the appliance for future consultation. SB

you pass the appliance on to another user, make it also include this documentation. Should certain pa this booklet be difficult to understand or should do

arise, contact the company before using the produ SAFETY INSTRUCTIONS

• After having removed the appliance from its pack, verify its integrity based on the drawing and any prior

• Do not let children play with the paplastic bag out of the reach of children - risk of sufficed damage caused by transport. If in blood, do no the appliance and contact an authorised service car

Before connecting the appliance, please sure that the voltage indicated on the plate corresponds to that of the mains voltage. Identification plate is found on the package of the p

and on the voltage adapter. • This appliance must be used only for the purpose which it was designed, namely as a hair trimmer house use. Few after use is considered not applicable

- If using the appliance in the bathroom, remove the of the voltage adapter from the socket after use as h

Water close by is dangerous even if the appear switched off. - For enhanced safety, it is recommended to in differential circuit breaker with a nominal open

differential current that does not exceed 30 mA (1 is ideal) in the electric circuit of the bathroom. Ask installer for advice. IMPORTANT: Do not use this part

IMPORTANT: DO NOT USE STAD APPT connected to the voltage adapter for the mains voltage socket if without an adi near bath tubs, wash basins or other

- containers! Never place the appliance water! • The appliance is not to be used by persons (no children) with reduced physical sensory or

abilities, or with no experience or knowledge, is supervised by a person responsible for their safe after having received instructions regarding its use. Children must be supervised in amate they do no

Do NOT use the appliance with wet hands or da bare feet when it is connected to the voltage adapter

(The main power supply. Do NOT pull the power cord or the appliance it's remove the plug from the voltage adapter or fro

socket. Do NOT expose the appliance to humidity or wet conditions (rain, sun, etc.).

- Always discovered the appliance from the main before cleaning or performing maintenance and who appliance is not in use. - If the appliance if faulty or malfunctions, switch it

do not temper with it. Any repairs must only be carried by an authorised technical service centre. • If the power cable or voltage adapter plug are dark they must be replaced by an authorised technical use

centre, so as to prevent all risks. • Always switch the appliance off and remove the plug the socket after use and after charging it • Use, charge and keep the appliance at a torque

• The hair trimmer must only be used to cut human. Do not use the device on animals or on was ma

synthetic material. (1 o 2)

DESCRIPTION OF THE APPLICANT AND ACCESSORIES [Fig. A]

Refer to figure [A] in the illustrative guide to verify appliance equipment.

  1. Adjustable comb (3-6-8-12 mm)
  2. Adjustable comb (15-18-21-24 mm)
  3. On/Off switch

  4. Charge (Type 61901) and operating (Type 61902)

  5. Adjustment button
  6. Blade locking device
  7. Direct charging connector / Maine-operated connect

  8. Current adapter For the features of the appliance, refer to the ex

packaging. Use only the supplied accessories.

CHARGING THE APPLIANCE (ONLY FOR Type E1801)

Charge the appliance for 12 hours before using it for the time. The appliance can operate for about 45 minutes fully charged.

Always make sure the appliance is completely dry to using and charging it. - Switch the appliance off

- Plug the adapter (6) into a socket and core charging lead into the connector (7) located in the part of the hair trimmer [Fig. 81]. The charging LED on [Fig. 82].

Warning: The charging LED (4) does not go off or change o

When charging is complete. Do not keep the appliance always connected to the air. Always switch the hair trimmer off and remove the plug. The socket offers 1 up and 40 inches.

To preserve the battery life of the hair trimmer: • Do not charge every day. It is recommend to dis

the battery completely every six months, and charging it for 12 hours. • Do not exceed the recommended charging.

• If the product will not be used for a long period or it must be charged for 12 hours before putting it away.

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS IMPORTANT! Never use the appliance

blades are damaged or the blade locking d does not work property

Warning: • Never use the appliance on wet hair

Make sure the hair is dry and clear, with no trace of hairspray, hair mouses or nel. Then brush the hair in the

IMPORTANT! Switch the appliance off before changing any accessory.

USING THE ADJUSTABLE COMB (1 AND 2) 1. Slide the adjustable comb (1 or 2) on the guiding process

- Make sure the comb (1 or 2) is inserted properly into the guiding grooves on both sides - Once the adjustable comb (1 or 2) is attached, the

appliance has 8 different hair length settings: ADJUSTABLE COMB (1) ADJUSTABLE COMB (2)

Cable settings Length obtained 1.3mm 2.5mm 3.8mm 4.12mm 8 15mm 6 18mm 7 21mm 8 24mm

- Set the comb (1 or 2) to the desired length by pressing the adjustment button (5) and sliding it to the desired width setting [P]o, C21

- Press the On/Off switch (3) to turn the appliance on. Always switch the appliance off when not in use

USEFUL RECOMMENDATIONS • Start with the highest selling of the adjustable comb and

• Achieve the best result by moving the appliance against the direction of hair growth.

- Move the appliance in different directions (upwards, downwards and sideways) as not all hair groves in the same direction. - If a lot of hair accumulates in the adjustable comb (1 or

2), remove the latter from the appliance and blow and/or shake the hair cut. • Take note of the hair length settings used to create a

certain style as a reminder for future sessions. USE WITHOUT THE ADJUSTABLE COMB/(1 OR 2)

The appliance can also be used without the adjustable comb (1 or 2) to trim hair very close to the skin (1 mm) or shape the page of the neck and the area around the ears.

Warning: When the appliance is used without the adjustable comb

(1 or 2) it will cut very close to the scalp. - Remove the adjustable comb (1 or 2) by pressing the following instructions: (1 or 2)

adjustment button (5) and sliding the adjustable comb (1 or 2) off the appliance [Fig. C3]

MAINTENANCE

IMPORTANT SWITCH THE APPLIANCE OR BEFORE cleaning or replacing the accessories! Make sure that any component that is cleaned with a damp cloth is completely dry before using it again as pulling it proved.

Clean the appliance immediately after each use and when there is hair or dirt trapped in the trimming unit.

- Do not lean the appliance with adjuvant powder or liquid such as alcohol or petrol. - Do not place the appliance in water or any other form of

liquid to prevent damaging it. BLADE LOCKING DEVICE

- Switch the appliance for and Unplug the adapter (0). - Remove the adjustable comb (1 or 2) by pressing the adjustment button (5) and sliding the adjustable comb (1 or 2) off the appliance (Fig. C9).

- Push the middle part of the blade locking device (6) upwards with your thumb until it opens [Fig. D1], and remove it from the appliance

- Be careful not to drop the blade locking device (S). - Clean the blade locking device (E) and inside the appliance with the brush supplied [Fig. D2, D3].

- Place the tab of the blade locking device (6) into the slot and snap the unit in position [Fig. D4].

ENVIRONMENTAL PROTECTION (ONLY FOR Type E1801)

The packaging is made up of recyclable material. Dispose of it in compliance with the environmental

protection standards. The product must be disposed of in compliance with the provisions of European standard 2002/95/EC. The

recyclable materials contained in the appliance must be collected to prevent environmental pollution. For further information contact the local waste authority or fire appliance facilities

BATTERY DISPORA

BATTERY DISPOSAL (only for Type E1801)

(Only for Type E1001) This product contains a rechargeable Ni-MH battery.

12,481 Warning: Do not dispose of the batteries in household waste:

be net dispose of the batteries in household walls; these must be disposed of separately. Remove the batteries from the appliance

Dispose of the batteries at a specific collection centre. Contact the authorised retailer or local authorities for

Unplug the appliance and let it ran until the batteries are dead.

Dismantling (Fig. E): 1. Remove the adjustable comb (1 or 2) by pressing the adjustment button (5) and sliding the adjustable comb

(1 or 2) off the appliance 2. Push the middle part of the blade locking device (5) upwards with your thumb until it opens, and remove it

from the appliance 3. Be careful not to drop the blade locking device (6) 4. Remove the two side covers with a screwdriver and then

the four screws 5. Remove the batteries

IMPORTANT! Do not plug the appliance back into the socket once the batteries have been

removed

ASSISTANCE AND WARRANTY To travel service or available more cards, please contact

To request repairs of purchase spare plans, please contact IMETEC's authorised customer service centre on the ToB-Free Number below or via the website. The appliance is covered by the manufacturer's warranty

The appliance is covered by the horizontal bar warranty. For details, read the attached warranty sheet. Failure to comply with the instructions for use and maintenance provided in this manual will render the

maintenance provided in this manual will tender the manufacturer's warranty null and void.

ESPAÑOL

i MANUAL DE INSTRUCCIONES PARA EL USO DEL CORTAPELO

In fact that the investment will be required on all future.

Cronkctor [100] 60V in gejogonkosts.

MAGYAR

The quick brown fox jumps over the lazy dog.

UTASITASOK A FELHASZNALOK RESZEHE

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : IMETEC

Model : Hi Man HC4 100

Category : Beard trimmer