SK246-SD - Refrigerator Schmick - Free user manual and instructions

Product Type	Freestanding Refrigerator
Brand	Schmick
Model	SK246-SD
Energy Efficiency Class	F (EU 2017/1369)
Total Gross Capacity	242 L
Noise Level	40 dB(A)
Climate Class	SN-ST (subnormal to subtropical)
Dimensions (H x W x D)	143.5 x 54.5 x 62.0 cm
Weight	48 kg
Power Supply	220-240 V, 50 Hz
Annual Energy Consumption	173 kWh
Number of Shelves	4 glass shelves
Vegetable Drawers	1 humidity-controlled drawer
Door Shelves	3 adjustable door bins
Egg Tray	Included
Interior Light	Yes, LED
Temperature Control	Mechanical dial
Defrost Type	Manual (freezer compartment) / Auto defrost fridge
Refrigerant	R600a (Isobutane)
Reversible Door	Yes
Spare Parts Availability	At least 7 years after purchase
Repairability Index	7.5 / 10
Maintenance	Clean condenser coils annually; defrost freezer when ice >5 mm

Frequently Asked Questions - SK246-SD Schmick

How do I adjust the temperature of my Schmick SK246-SD fridge?

The temperature is controlled by a mechanical dial inside the fridge compartment. Turn it clockwise for cooler temperatures and counterclockwise for warmer. Allow 24 hours for the temperature to stabilize after adjustment.

Is the door reversible on the SK246-SD?

Yes, the door can be reversed to open from the left or right. Refer to the manual for step-by-step instructions on hinge removal and reinstallation.

How to defrost the freezer compartment?

When ice builds up (approx. 5 mm thick), unplug the fridge and leave the freezer door open. Place towels to absorb water. Do not use sharp objects to scrape ice. Dry thoroughly before restarting.

What is the recommended temperature for storing food?

The fridge compartment should be kept between 2°C and 8°C (ideally 4°C). The freezer, if present, should be at -18°C or lower.

How to clean the fridge?

Unplug the appliance. Use a mild detergent in warm water to wipe the interior and door seals. Avoid abrasive cleaners. Clean the condenser coils every 6 months with a vacuum or brush.

What should I do if the fridge is not cooling?

Check that the thermostat is not set to '0' or 'Off'. Ensure the door is closing properly. Clean the condenser coils. If the problem persists, contact a qualified technician. The refrigerant may need inspection.

Can I place hot food inside the fridge?

No, allow hot food to cool to room temperature before placing it inside. Putting hot food can raise the internal temperature and affect other stored items.

What is the noise level of the SK246-SD?

The noise level is approximately 40 dB, which is similar to a quiet conversation. Some clicking or humming sounds are normal.

How to replace the interior light bulb?

The SK246-SD uses an LED light, which cannot be replaced by the user. If the light fails, contact customer service for assistance.

Where can I find spare parts for the SK246-SD?

Spare parts are available from the manufacturer for at least 7 years after purchase. Contact Schmick customer service or authorized dealers. Provide the model number SK246-SD.

USER MANUAL SK246-SD Schmick

VERY IMPORTANT INFORMATION

CARE AND PROTECTION OF STAINLESS STEEL SURFACES

Your Bar Fridge features Stainless Steel components, using 304 and/or 201, 430 or 418 grade Stainless Steels. All Stainless Steel grades require a level of care and protection to retain their appearance. Stainless Steel is not immune to corrosion and neither are they maintenance-free, contrary to popular public perception. Even the highest marine grade 316 Stainless Steel can rust without care, they require frequent cleaning with fresh water to avoid oxidation and other corrosive issues.

Modern tastes dictate that your Alfresco Bar Fridge or BBQ features Stainless Steel with a brushed finish. This brushed finish is attained by running Stainless Steel sheets through an abrasive process that removes the ‘mirror finish’ to leave it ‘brushed’. Brushed finish Stainless Steel requires frequent cleaning and care, to maintain its quality of appearance. Without adequate care it is realistic to expect that it will show signs of corrosion in time, that is 100% guaranteed.

Stainless Steel is definitely not a maintenance-free material. Cleanliness and Stainless Steel are closely related.

After installation, we recommend that owners apply a thin layer of Olive Oil with a clean rag, to all exposed Stainless Steel areas. This should then be polished in and buffed off with another clean rag to a non-oily finish. This process will aid protection against dirt and other corrosive contaminants, by providing a temporary food-safe shield. The Olive Oil layer also makes later polishing and removal of fingerprints easier. This process should be repeated frequently every 3-4 months.

A lot of times rust that first appears is just 'surface rust (tea straining)', this will simply wipe off with hot 'drinking/tap' water and very fine steel wool if needed. When you wipe clean dry with clean cloth and add olive oil coating.

You must take into account with your purchase that to look after stainless steel will have added costs and time needed to periodically maintain.

Look after your investment carefully and it will serve you well for many years to come.

Postal: P.O Box 166, Sebastopol, Vic, 3356

Head Office: 40 Production Drive, Alfredton, Vic, 3350

Ph: 03 53376399 Fax: [phone]

Email: [e-mail] Web: www.bar-fridges-australia.com.au

Golden Bear Enterprises T/As Bar Fridges Australia and Aquarange ABN 13 101 612 239