ABT-115V-2186 - Freezer American BioTech Supply - Free user manual and instructions

Product Type	Upright Freezer
Brand	American BioTech Supply
Model	ABT-115V-2186
Capacity	21.8 cu ft (618 L)
Temperature Range	-20°C to -10°C (-4°F to 14°F)
Exterior Material	Stainless steel
Interior Material	Aluminum
Number of Shelves	4 adjustable shelves
Defrost Type	Manual defrost
Refrigerant	R404A
Voltage	115 V
Frequency	60 Hz
Power Consumption	350 W (average)
Dimensions (W x D x H)	28 x 28 x 72 inches (71 x 71 x 183 cm)
Weight	200 lbs (91 kg)
Noise Level	52 dB
Climate Class	SN-ST (10°C to 38°C)
Key Features	Digital thermostat, key lock, audible alarm, caster wheels
Maintenance	Clean interior with mild detergent; vacuum condenser coils every 6 months
Cleaning	Unplug unit, remove contents, wipe with warm water and baking soda solution
Safety	Over-temperature alarm, door open alarm, child lock
Spare Parts	Available from American BioTech Supply; contact customer service
Warranty	2 years parts and labor

Frequently Asked Questions - ABT-115V-2186 American BioTech Supply

How do I adjust the temperature on my ABT-115V-2186 freezer?

Use the digital control panel. Press the '+' or '-' buttons to set the desired temperature between -20°C and -10°C. The display shows the current temperature.

How often should I defrost the freezer?

Defrost manually when the frost buildup exceeds 1/4 inch (6 mm). It is recommended to defrost every 6-12 months, depending on usage and humidity.

What should I do if the alarm sounds?

The alarm indicates a temperature deviation. Check if the door is closed properly, ensure the unit is not overloaded, and verify the power cord. If the alarm persists, contact American BioTech Supply support.

Can I store both vaccines and food in this freezer?

This freezer is designed for laboratory and medical storage. It can store vaccines, samples, and food at safe temperatures. However, separate compartments are recommended to avoid cross-contamination.

How do I clean the freezer?

Unplug the unit and remove all contents. Clean the interior with a mixture of warm water and mild baking soda solution. Avoid abrasive cleaners. Rinse and dry thoroughly before restarting.

What is the recommended clearance around the freezer?

Allow at least 4 inches (10 cm) of space on the sides and back, and 12 inches (30 cm) above the unit for proper ventilation. This ensures efficient operation and prevents overheating.

How do I replace the door gasket?

Contact American BioTech Supply for a replacement gasket. To install, remove the old gasket, clean the groove, and press the new gasket into place. Ensure a tight seal for efficient operation.

Is the freezer energy efficient?

The ABT-115V-2186 is designed with energy-saving features, including a high-efficiency compressor and thick insulation. Typical power consumption is 350W, with Energy Star certification pending.

What does the key lock do?

The key lock secures the freezer door to prevent unauthorized access, ensuring the integrity of stored contents, especially valuable or sensitive items.

Where can I find the serial number?

The serial number is located on a sticker inside the freezer, near the top left corner. It is also listed on the back of the unit and on the original packaging.

USER MANUAL ABT-115V-2186 American BioTech Supply

A NEW LEADER IN

ULTRA LOW TEMP FREEZERS

Benefits you need, features that make it the perfect solution.

Control Center

• Large LCD control panel
• Oversized LED temperature display
- Password protected

Ergonomic Door Handle

- Easy one-hand open & close

• Key lookab o fca sample

security

Diagnostic

Capabilities

• RS-232 accommodates

downloading of event tags

External Monitoring

• 4-20mA ou 5p

• Remote alarm contacts
- Compatible with external
earms and monitoring
systems
• Optional chart recorder

Available in 17.21 & 25 Cubic Foot Models

Designed to fit through a 34" doorway.

Added Sample Security

• 21 audible & visual alerts
• Voltage booster to protect the compressor during periods of low voltage
• Battery backup for alarms
• Rear access port for central building alarm system

Reserve Capacity with High Efficiency & Low Noise

• Two high efficiency compressors
• 300 RTU/h reserve capacity
- Low decibe levels

User Friendly

Maintenance

• easy to access and clean
  condenser ter
• Low profile casters with locks

Triple Seal Gasket

• Requires frost & ice build-up
  • Maximum protection for
  sensitive samples

Vacuum Relief Port

• Eases door open has without
  sacrificeg superior seal
• Accessible for cleaning

5 1/2" to 6" Thick

Urethane Insulation

• Reduces power consumption
while improving temperature performance

Five Individual

Compartments with

Adjustable Shelves

• Gain maximum versatility without
  sacrificing temperature performance
• Designed to utilize standard racks

Five Double Wall

Insulated Inner Doors

• Requires cold air loss and
  improves temperature recovery
  after door openings
• Rel. temperature are uniformly

How Profile Casters with Locks

Environmentally Friendly

Two high efficiency compressors 6" Thick insulation

CFC-HCFC Free Refrigerant and Insulation 5 inner doors

All reduce energy consumption to only 15 kw/day

Quality

Superior strength, seal and durability guaranteed with state of the art molding fixtures that combine the strength of steel with high R-value structural foam

ADVANCED & CONFIGURABLE CONTROL

Easy to use, multi-function control is password protected, and monitors 24 functions and conditions.

Intuitive Interface

Easy to follow prompts simplify changing set points, calibration and accessing diagnostics.

Simple to Troubleshoot

The control system monitors and records all specified conditions up to 4,000 events. This history can be downloaded for rapid assessment of any alarm.

Functions & Conditions

High control probe temperature

on control probe temperature

Door is ajar

Power failure - loss of AC input voltage

Power failure - loss of 12% power supply

correct power connected

-high ambient temperature

Low battery voltage

High stage system failure

Low stage system failure

Consonular airflow alarm

Low voltage alarm

High voltage alan

Control probe failure

Heat exchanger probe failure

Condenser proof failure

Ambient proof failure

Sample probe failure (1* installed)

Control probe disconnected

Heat exchanger disconnected

Condenser probe disconnected

Ambient probe disconnected

Sample probe disconnected (institute)

Failed battery test

PRECISE

TEMPERATURE

100% Precision Control for your sensitive specimen

Configure

Ring-Back delay

Password security (Access code)

CD contrast

Run battery test

Battery backup

Sample

Calibrate

The owner's manual includes detailed

calibration information and instructions.

Run

Vers on details (control)

Gardonser temperature

Heat exchanger temperature

Ambient temperature

Control temperature

Line voltage

Cycle period

Battery life

Settings

Set time

Set date

Access code (status message)

High alarm

temperature set

(2) 10.48 (1)

21 Audible & Visual Alarms

Ensure sample security

Extend freezer life by notifying user of

High Temp Alarm

-ow Temp Alarm

AC Line Failure

12V P5 Failuc:

neuronal Power

ligo Ambient Iama

low Battery

H.S System Failure

L S System Failure

Air Flow Problem

Low Voltage

High Line Voltage

Control Proce Failure

leaf Exchangeer Probe Failure

Sample Probe Failure

Ambient Probe Failure

Line/Reost Voltage Sensing

Probe-Lonplugged

Failed Battery Test

Initializing Error

Door Open

ABE

Trevor Bofter-Survey

1-800-648-4041 | 5

ENGINEERED TO PERFORM & LAST

Power to Cool

- Five sides of direct contact copper evaporator tubes secured with steel tabs

Strength to Last

• Steel, double walled cabinet
• Double walled inner doors
• Triple contact gasket
- 6" of urethane insulation in critical areas

Designed to Standardize Your Lab

• Utilizes standard racks

Easy Access

• One-step filter access
- Removable sides, rear and front panels

SPECIFICATIONS PRODUCT & INVENTORY

Model Number	ABT-115V-1786ABT-230V-1786	ABT-115V-2186ABT-230V-2186	ABT-230V-2586
Temperature Range	-40°C to -80°C	-40°C to -80°C	-40°C to -80°C
Dimensions extensor (I/W) inches	70.5 x 30.6 x 30.3	70.5 x 30.3 x 30.3	70.5 x 49.5 x 30.3
Dimensions interact (I/W) index	50x 23 x 23	50 x 29.3 x 23	50 x 34.8 x 23
Inner holes	5 inhaled	5 inhaled	5 inhaled
Security	All models feature key lockable door & passcode potentiable control
Compression	5 HP to HP console	5 HP to HP console	5 HP to HP console
Insulation	3.5" to 6" HP disturbance	5.5" to 6" HP disturbance	5.5" to 6" HP disturbance
Door garden	3-point silicone sealing	3-point silicone sealing	3-point silicone sealing
BTU injection	2150	2370	2500
Shipping weight	700	780	855
Electrical	115v/230v	115/230v	230v
Driver requirement	115v / 20 amps dedicated230v / 10 amps dedicated	115v / 20 amps dedicated230v / 10 amps dedicated	230v / 10 amps dedicated
Plug	115v / NLMA 5-20230V / NEVA 6-15	115v / NLMA 5-20230V / NEVA 6-15	230v / NLMA 6-15
Agency listings	UL 4/1	UL 4/1	UL 4/1
Performance
Average stability	2°C	2°C	2°C
Average uniformity	-4.5°C	+4.5°C	+4.5°C
Reserve capacity	300 BTUs @ 25°C	300 BTUs @ 25°C	300 BTUs @ 25°C
Warm-up time	-80°C to -50°C in 3 hrs	-80°C to -50°C in 3 hrs	-80°C to -50°C in 3 hrs
	-80°C to 20°C in 12 hrs	-80°C to 20°C in 12 hrs	-80°C to 20°C in 12 hrs
Average energy consumption	15kW Hourday	16.3kW Hourday	18kW Hourday
Sound pressure level	55 - 60 db A scale @ 3 feet depending upon location and measurement testing

Storage

Inventory racks will store a steen (16) 2" boxes arranged four boxes high by four boxes deep or twelve (12) 3" boxes arranged three boxes high by four boxes deep. Rack dimensions are 8-7/8"H x 5-1/2"W x 22-1/4"D including the handles on the front and back of the rack.

Box Capacity
2" Boxes	320	400	480
3" Boxes	240	300	360
# of banks	20	25	30
Bonds/Shell	4	5	6

Supplying the tools and equipment the biotech industry needs to succeed

A Long Tradition of Excellence

Over 25 years' experience of delivering quality products to protect and preserve your life's work. Versatility & variety: from temperature presets to sizes, to shelf configurations, you get the exact products you need.

A Warranty to Stand Behind

The ULT line is backed by a full two-year warranty on parts and labor and an additional three years on compressor parts. A national network of trained service technicians supports this warranty.

ABS

American BioTech Supply

Ordering & Contact Information

Please contact ABS for the nearest distributor or sales representative.

1-800-648-4041•

• AmericanBiotechSupply.com

• [e-mail]

• American BioTech Supply 125 Varnfield Dr. Summerville, SC 29483