XS-6951 - Car speaker SONY - Free user manual and instructions

Product Type	Car Speaker
Model	XS-6951
Brand	Sony
Speaker Size	6x9 inches (oval)
Speaker Type	4-way coaxial
Peak Power Handling	350 W
RMS Power Handling	60 W
Sensitivity	91 dB
Frequency Response	30 Hz – 25 kHz
Impedance	4 Ohms
Magnet Weight	10 oz (approx.)
Mounting Depth	2.5 inches
Dimensions (W x H x D)	16.2 x 9.5 x 3.5 inches
Weight per Speaker	2.2 lbs
Power Source	Car audio system (12V DC)
Main Functions	High-fidelity sound reproduction, enhanced bass response
Cleaning Instructions	Wipe with a dry cloth; avoid liquids
Safety Notes	Ensure proper mounting to prevent vibration; disconnect battery before installation
Spare Parts Availability	Contact Sony support for replacement parts
Warranty	1 year limited

Frequently Asked Questions - XS-6951 SONY

What is the correct wiring polarity for the XS-6951?

Connect the positive terminal of the speaker to the positive output of your amplifier or head unit, and the negative to negative. Reversing polarity will cause phase cancellation and reduced bass.

Can the Sony XS-6951 be installed in a car door?

Yes, it fits most standard 6x9 openings, but check mounting depth (2.5 inches) and ensure window clearance. Use included mounting brackets for proper fit.

What is the RMS power handling of this speaker?

The RMS power handling is 60 watts. Peak power is 350 watts. For best performance, use an amplifier delivering 30-60 watts RMS per channel.

Is the XS-6951 compatible with a stock car stereo?

Yes, it works with most head units, but for optimal sound quality, consider an external amplifier. The 4-ohm impedance matches standard car audio systems.

How do I clean the speaker grille?

Gently vacuum the grille using a soft brush attachment. For stubborn dust, use a slightly damp microfiber cloth. Avoid spraying liquids directly onto the speaker.

What tools are needed for installation?

You will need a screwdriver (Phillips or flathead), wire strippers, electrical tape or crimp connectors, and optionally a panel removal tool to remove trim.

Does the XS-6951 come with a grille?

Yes, it includes a protective mesh grille and mounting hardware. The grille is removable if you prefer a custom look.

Can I use these speakers for an outdoor sound system?

They are designed for interior car use. Exposure to moisture or extreme temperatures may damage the speaker. For outdoor use, consider marine-rated speakers.

What is the recommended break-in period?

Play the speakers at moderate volume for 20-30 hours to allow the suspension components to loosen up, improving bass response and overall sound quality.

Where can I find the user manual?

The user manual is available for free download at notice-facile.com in PDF format. You can also request a translated version via email.

USER MANUAL XS-6951 SONY

• Do not touch the cone of the speaker during mounting.
• Use the precut holes of the metal partition under the rear deck, if available.
• Nothing should interfere with the speaker inside the trunk.
  • The speaker should not touch the window or the seat.

If you cannot find an appropriate mounting location, check with your car dealer or consult the Sony Speaker Application Guide (in the USA).

Mounting methods

There are two methods of mounting the speakers. Choose the method that suits your car best.

Method A Mounting from the car interior

A depth of at least 69 mm (2 ^3/4 inches) is required to mount the speaker flush.

Method B Mounting from the trunk

A depth of at least 102 mm (4 ^1/8 inches) is required to mount the speaker flush.

Avant le montage

Connections/Connexions

To Use the Unit in a Multi-Amplification System

Specifications/Spécifications

Unit: mm (inches) Unit: mm (po.)

Dimensions Dimensions

Speaker	Coaxial 3-wayWoofer 16 × 23 cm ( 6 × 9 inches)polypropylene cone typeMidrange 5 cm (2 inches) high polymerfilm cone typeTweeter 2.5 cm (1 inch) high polymerfilm dome type	Haut-parleur	Coaxial à 3 volesWoofer de 16 × 23 cm ( 6 × 9 po.) detype conique en polypropylèneMedium de 5 cm de haut (2 po.) de typeconique en polymer stratifiéTweeter de 2,5 cm de haut (1 po.) detype dôme en polymer stratifié
Power handling capacityMaximum music power 120 wattsImpedance 4 ohmsSensitivity 90 dB/W/mFrequency responseFull range: 28-25,000 HzMulti: LOW 28-6,000 HzHIGH 3,000-25,000 HzWeight Approx. 2.3 kg (5 lb 1 oz) per speakerDesign and specifications subject to change without notice.		Puissance admissiblePuissance musicale maximum de120 wattsImpédance 4 ohmsSensibilité 90 dB/W/mRéponse en fréquencePleine gamme: 28 à 25 000 HzMulti: LOW 28 à 6 000 HzHIGH 3 000 à 25 000 HzPoids Env. 2,3 kg (5 li. 1 on.) par haut-parleurLa conception et le spécifications sont modifiables sans préavis.