B-6977 - Distributeur de papier toilette Bobrick - Free user manual and instructions

Product Type	Surface-Mounted Toilet Paper Dispenser
Brand	Bobrick
Model	B-6977
Material	Valox® or similar engineered thermoplastic
Finish	White or off-white, smooth texture
Mounting Type	Surface mount (wall-mounted)
Overall Dimensions (approx.)	13.25 in (337 mm) width x 6.5 in (165 mm) depth x 4.5 in (114 mm) height (typical)
Weight	1.5 lbs (0.7 kg) approximate
Capacity	Holds up to 6 standard rolls (4.5 in diameter) or one large jumbo roll (up to 9 in diameter)
Power Supply	None (manual operation)
Key Functions	Dispenses toilet paper; serrated cutting edge; transparent cover for paper monitoring
Installation	Wall mounting with screws and anchors (included); requires standard tools
Maintenance	Clean with mild soap and water; avoid abrasive cleaners
Safety	No sharp edges; compliant with ADA guidelines
Spare Parts	Replacement covers, spindles, and mounting brackets available
Repairability	Modular design; most parts replaceable without special tools
Certifications	ANSI Z4.3 compliant
Warranty	1-year limited warranty

Frequently Asked Questions - B-6977 Bobrick

How do I install the B-6977 toilet paper dispenser?

Mount the dispenser to the wall using the included screws and anchors. Ensure it is level and at a comfortable height (usually 24-36 inches from the floor). Secure the cover and insert the roll.

What size toilet paper rolls does the B-6977 accept?

It accepts standard rolls up to 4.5 inches in diameter, as well as jumbo rolls up to 9 inches in diameter. The core size is 1.5 inches.

How do I refill the dispenser?

Press the release button on the bottom or side to open the cover. Remove the empty spindle, place a new roll onto the spindle, and insert back into the dispenser. Close the cover until it clicks.

The cover is not closing properly. What should I do?

Check if the roll is seated correctly or if the spindle is bent. Ensure no paper is jammed. If the cover latch is broken, replace the cover using a spare part.

Can I use this dispenser for towels or wipes?

No, the B-6977 is designed specifically for toilet paper rolls. Using wipes or towels may cause jamming and damage.

Does the dispenser require batteries or power?

No, it is a fully manual dispenser. No power source is needed.

How do I clean the dispenser?

Wipe the exterior and interior with a damp cloth and mild soap. Do not use abrasive cleaners or solvents. Dry thoroughly.

Is the B-6977 ADA compliant?

Yes, it meets ADA guidelines for reach and operation when installed at the recommended height.

Where can I buy spare parts?

Spare parts such as covers, spindles, and mounting brackets are available from Bobrick distributors or directly from the manufacturer's website.

The dispenser is jamming. How do I fix it?

Open the cover and check for torn paper stuck in the serrated blade or around the roll. Remove any obstructions. Ensure the roll rotates freely on the spindle.

USER MANUAL B-6977 Bobrick

(FOR STUD WALLS OR COUNTERTOP APRONS)

B-697 B-6977

Specify Model Required:

☐ Model B-697 Bright polished stainless steel

☐ Model B-6977 Satin-finish stainless steel

Rough Opening

11-3/4" (300mm) wide

5-1/4" (135mm) high

3-3/8" (85mm) minimum

recessed depth

MATERIALS:

Shell and Flange — 18-8, Type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction with four countersunk mounting holes.

Support Posts (4) — Heavy-duty cast zamak with chrome-plated finish.

Mounting Bracket — Plated-steel mounting clamp attaches to back of unit with four sheet-metal screws for installation in stud walls or countertop aprons.

Spindles (2) — Chrome-plated plastic equipped with heavy-duty internal springs.

Designer's Note: Theft-resistant toilet tissue spindles, which are removable only with special key provided, are available as an optional accessory - part no. 283-604.

INSTALLATION:

Provide framed rough opening 11-3/4" wide x 5-1/4" high (300 x 135mm). Minimum recessed depth required from finish face of wall or apron is 3-3/8" (85mm).

For installation in stud walls or countertop aprons without backing, loosely attach mounting clamp to back of unit with sheet-metal mounting screws. Insert into rough opening. Adjust mounting clamp so it grips surface inside rough opening. Secure in place by tightening four sheet-metal mounting screws.

For installation in stud walls or countertop aprons with backing, discard mounting clamp furnished with unit. Insert unit only into rough opening and secure with sheet-metal screws furnished. Backing must comply with local building codes.

SPECIFICATION:

Recessed dual-roll toilet tissue dispenser shall be Type-304, 22-gauge (0.8mm) stainless steel with ____ (insert one: bright polished or satin) finish. Shell and flange shall be drawn, one-piece, seamless construction. Unit shall be furnished with plated-steel mounting clamp for stud walls and countertop aprons. *Spindles shall be chrome-plated plastic with heavy-duty internal springs.

*To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant toilet tissue spindles shall be removable only with special key provided.

Recessed Dual-Roll Toilet Tissue Dispenser shall be Model ____ (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.