MaxiiView Vi00023 - Network Card/Adapter Vigitron - Free user manual and instructions

Product Type	Network Adapter / Video Transmitter
Dimensions (L x W x H)	4.0 x 2.0 x 1.0 inches (102 x 51 x 25 mm)
Weight	3.5 oz (100 g)
Power Supply	Power over Ethernet (PoE) IEEE 802.3af or 12V DC adapter
Main Functions	Transmits video and data over Ethernet cable; supports HD video up to 1080p
Maintenance & Cleaning	Wipe with dry cloth; avoid liquids and abrasive cleaners
Safety	Designed for indoor use only; keep away from moisture and extreme temperatures
Spare Parts & Repairability	No user-serviceable parts inside; contact Vigitron for service
General Information	Part of the MaxiiView series; plug-and-play installation; LED status indicators

Frequently Asked Questions - MaxiiView Vi00023 Vigitron

How do I connect the MaxiiView Vi00023?

Connect the device to your camera and network switch using Ethernet cables. Ensure the switch supports PoE or use the included power adapter.

Does it support 4K video?

No, the Vi00023 supports HD video up to 1080p resolution.

What is the maximum transmission distance?

The device can transmit video and data up to 100 meters (328 feet) over standard Cat5e or Cat6 cable.

Is it compatible with all cameras?

It works with most analog and HD-TVI cameras that output BNC or coaxial video.

How do I reset the device?

Unplug the power or Ethernet cable, wait 10 seconds, and reconnect. There is no reset button.

Can it be used outdoors?

No, the Vi00023 is designed for indoor use only. Protect it from moisture and extreme temperatures.

What do the LED lights indicate?

The power LED shows when the device is on, and the link LED indicates an active Ethernet connection.

Does it require any software installation?

No, the device is plug-and-play and does not require drivers or software.

What is the power consumption?

The device consumes less than 5 watts when powered via PoE.

Where can I find the user manual?

The manual is available for download on notice-facile.com in PDF format.

USER MANUAL MaxiiView Vi00023 Vigitron

Exterior view of a MaxView I2P-Linear Semiconductor Tool (no signage or text on device body)

Vigitron's patent pending Vi00023 wireless camera setup tool offers a fast and reliable method for focusing and adjusting the view of IP cameras in the field. The connected IP camera image is transmitted through both WiFi and wired connection allowing for quick in-field view of image on cell phones, tablets or laptops.

The Vi00023 has a rechargeable and removable battery that provides power to the unit and the connected camera.

Its built in Midspan is compliant to IEEE 802.3af/at and provides up to 36W PoE power. It also displays PoE voltage and power consumed by the camera.

A 5V @1.5A USB port is provided for charging smart Phones and Tablets on site.

A DC power output provides a 12VDC @ 1.5A for powering non PoE devices.

The Vi00023 is very compact and light and can easily fit in a pocket. The carrying strap makes it easy to operate hands-free.

Important Safety Warning

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Use in accordance with the manufacturer's instructions.
• To reduce the risk of fire or electrical shock, do not expose these products to rain, moisture, dripping or splashing.
• No objects filled with liquids, such as vases, shall be placed on Vigitron equipment.
• DO NOT install the unit in a place where the operating ambient temperature true exceeds 75^irc C.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• The network cable is used as the disconnect device and shall remain readily operable.

Application Drawing

Providing PoE and WiFi Connection to a Camera

The Vi00023 enables connecting the PoE cameras to any wireless device using a WiFi connection.

Providing DC Power and WiFi Connection to a Camera

The Vi00023 enables connecting the non PoE cameras to any wireless device using a WiFi connection.

The Vi00023 Setup

• Slide the power switch to "ON" position to turn on the Vi00023.
• The OLED display will illuminate and show Vigitron Logo.
• The OLED display will then show camera power usage, voltage, and the Vi00023 battery level.
• The blue WiFi LED will lit after 20 seconds to indicate WiFi is "ON".
• Connect a Cat5/6 network cable to the RJ45 connector of the IP camera.
• Connect the other end of the network cable to Cat5/6 network cable to the "Camera" port of Vi00023.

Use only the provided fast charger for charging battery. It can fully charge the battery with in 3 hours. The charging port is a Barrel Connector located on the battery pack.

The Vi00023 removable batteries can be charged either connected to the Vi00023 or stand alone.

WiFi Connection

- Open the network or wireless settings on your laptop or mobile device.

• Apple devices: Choose Settings > Wi-Fi
• Android devices: Choose Settings > Wireless & Networks > Wi-Fi

• Windows devices: Enable the wireless connection.

• Select Vi00023-xxxxxx from the list of networks where “xxxxxx” is a unique value for each device.

• Select the manual button, enter and then save an IP Address (with same subnet as your IP camera) and Subnet Mask that will allow access to the IP camera. This will establish a wireless connection between your WiFi device and the Vi00023.

• Open the web browser:

• Enter the IP address of the camera on the address bar.
  • View camera image, focus and setup the view.

• The Blue Status LED on the top panel of Vi00023 should be flashing to indicate proper WiFi connection.

Wired Connection

- Connect the “Network” port (RJ45) on the side of Vi00023, to your laptop or Network using a standard Cat5/6 network cable. This will establish a wired connection between the IP camera, laptop or network, and the Vi00023. Note: Make sure that your laptop shares a same subnet as your IP camera by checking Laptop IP Address.

Wired Connection (Continued)

- Open the web browser on your laptop.

• Enter the IP address of the camera on the address bar.
  • View camera image, focus and setup the view.

The Activity LED on the RJ45 connector should be “ON” and flashing to indicate proper connection between the network and Vi00023. If the IP camera is connected to Vi00023’s front Ethernet port, it will receive power from Vi00023.

- If the camera is connected to Vi00023's "Aux Port", external power must be provided to the IP camera.

Technical Specifications\*

Electrical

Camera Port

Connector Camera Port: RJ-45, 10/100Mbps data and PoE

PoE Standards IEEE 802.3af, IEEE 802.3at, and most non-standard PoE sources up to 36W

LED Indicator Activity: Orange

PoE: Green

Input/Outputs

Charger Input Barrel Connector Jack, must use provided fast charger

USB Output 5VDC @ 1.5A Max. BC1.2 Standard for charging phones (No data connection)

Power Output 12VDC @ 1 A, Barrel Connector Jack

Display

Type 128x32 monochrome OLED display

Content PoE Voltage and Power, Battery status

Aux Port

Connector RJ-45, 10/100Mbps Data, no PoE

LED Indicator Activity: Orange

WiFi

Security SPA2 - PSK with user configured password

SSID User Configuration

Wireless frequency Default 2.4Ghz compatible to b.g.n

IP address IvP4 Auto and Manual

IP Setting IP Address auto or programmable subnet

LED Indicator WiFi: Blue

Maximum Clients 12 Maximum

WiFi Range 50 feet, 15m

DC Output

Output power 12VDC @ 1.5 A, Barrel Connector Jack

LED Indicator Activity: Green

Removable Battery

Type Lithium Ion Battery

Power 43.2Wh, built in rechargeable battery

Nominal Voltage 14.4V

Capacity 3000mAh

Operating Time 65 Minutes at 36W, 8 Hours at 5W

Charge time 3 hours with provided fast charger

Lifetime Keeps over 80% of initial capacity up to 300 charges

Regulatory

Safety CE

Environmental Rohs, WEEE

Environmental

Humidity 0-90% non condensing

Operating Temperature -20^ircC to +50^ircC

Storage Temperature -20°C to +50°C

Technical Specifications\*

Mechanical

Dimensions 7.25 x1.3 x3.3 in., 18x3.3x9.2 cm (HxWxL)

Weight 1.18 lb; 535 g

Housing Extruded Aluminum and ABS plastic UL rating of

94V-0

Accessories

Vi00023BC Universal Battery Charger (UK, US, EU & AU plugs)

Vi00023RB Extra Removable Battery

Vi00023CC Carrying Case

4 feet RJ45 Ethernet cable

Shoulder Strap

Vi00023BC Battery Charger

Input 100-240 VAC, 1.5 A, 50/60 Hz

Output 16.8V, 1 A Max.

Charging time 3 Hours Maximum

Charging Temperature 0°C to +45°C

Connectors Input power: "Figure of 8" AC Connector

Output power: Barrel Connector Jack

*Specifications subject to change without notice.

Status LEDs

LED Name Color Status Function
WiFi	Blue	OFF WiFi is OFF
		ON WiFi is ON
PoE	GREEN	OFF	No PoE
		ON	PoE Active
Activity (Camera Port) Activity (Network Port) Activity (Laptop Port)	GREEN	OFF	No Ethernet
		ON	Ethernet Activity

Ordering Information

Part No. Description

Vi00023

MaxiiView Wireless IP Camera setup Tool w/removable PoE Power Bank

Limited Lifetime Warranty

Vigitron, Inc. warrants that all Vigitron products excluding batteries (“Product”), if used in accordance with these instructions, will be free of defects in material and workmanship for lifetime defined as the duration period of time until product end of life is announcement. After which Vigitron will continue to provide warranty services for a period of 3 years. Period covering valid warranty will be determined by proof of purchase in the form of an invoice from an authorized Vigitron dealer.

Warranty will only be provided for as long as the original end user purchaser owns the product. Warranty is not transferable. At Vigitron's option, defective product will be repaired, replaced or substituted with a product of equal value. This warranty does not apply if, in the judgment of Vigitron, Inc., the Product fails due to damage from shipment, handling, storage, accident, abuse or misuse, or if it has been used or maintained not conforming to Product manual instructions, has been modified, or serial number removed or defaced. Repair by anyone other than Vigitron, Inc. or an approved agent will void this warranty. Vigitron, Inc. shall not under any circumstances be liable to any person for any incidental, indirect or consequential damages, including damages resulting from use or malfunction of the product, loss of profits or revenues or costs of replacement goods. The maximum liability of Vigitron, Inc. under this warranty is limited to the original purchase price of the Product only.

Please contact Vigitron to learn about Limited Warranty for Rechargeable Batteries.