XV6800 - Mobile Phone HTC - Free user manual and instructions

Product Type	Smartphone
Brand	HTC
Model	XV6800
Dimensions	107 x 70 x 17 mm (4.21 x 2.76 x 0.67 in)
Weight	150 g (5.29 oz)
Operating System	Windows Mobile 6 Professional
Processor	Qualcomm MSM7500 400 MHz
RAM	128 MB
ROM	256 MB
Display	2.8 inches TFT resistive touchscreen, 240x320 pixels
Battery	Li-Ion 1500 mAh, removable
Standby Time	Up to 240 hours
Talk Time	Up to 5 hours
Primary Camera	2 MP, 1600x1200 pixels
Video Recording	Yes, CIF
Connectivity	CDMA, Bluetooth 2.0, Wi-Fi 802.11b/g, GPS
Expansion Slot	microSD (up to 4 GB)
Input	Stylus, QWERTY keyboard, Touchscreen
Sensors	Ambient light, Proximity
Audio	3.5 mm headphone jack, Speakerphone
Charging	Mini-USB
Maintenance & Cleaning	Wipe with dry cloth; avoid liquids
Safety	Keep away from water, heat, and magnetic fields
Spare Parts & Repairability	Battery and stylus replaceable; screen repair available

Frequently Asked Questions - XV6800 HTC

How to perform a hard reset on HTC XV6800?

Turn off the device. Press and hold the Left Soft Key and Right Soft Key simultaneously, then press the Power button. Follow on-screen instructions to reset.

What type of SIM card does the XV6800 use?

The HTC XV6800 is a CDMA device and does not use a SIM card. It uses an internal ESN (Electronic Serial Number) for network identification.

How to connect to Wi-Fi?

Go to Settings > Connections > Wi-Fi. Turn on Wi-Fi and select your network. Enter password if required.

My XV6800 screen is unresponsive. What should I do?

First, try a soft reset by removing and reinserting the battery. If still unresponsive, perform a hard reset. Calibrate the screen via Settings > System > Screen > Align Screen.

How to expand storage?

Insert a microSD card into the slot located under the battery cover. Supports up to 4 GB.

Can I use the XV6800 as a GPS navigator?

Yes, it has built-in GPS. Install compatible navigation software like TomTom or Google Maps.

How to take a screenshot?

Press and hold the Camera button, then press the Enter key. Screenshots are saved in the My Pictures folder.

Why is my battery draining quickly?

Common causes: Wi-Fi/GPS left on, high screen brightness, or background apps. Turn off unused radios and reduce brightness.

How to sync contacts with Outlook?

Install ActiveSync on your PC. Connect via USB, open ActiveSync, and enable contact synchronization.

Where can I download the user manual?

The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version via email.

USER MANUAL XV6800 HTC

Please Read Before Proceeding

THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX.

DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.

YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE'S OUTER CASING.

PRIVACY RESTRICTIONS

Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your PDA Phone.

INTELLECTUAL PROPERTY RIGHT INFORMATION

Copyright © 2008 HTC Corporation. All Rights Reserved.

htc, , and ExtUSB are trademarks and/or service marks of HTC Corporation.

Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, Windows XP, Windows Vista, ActiveSync, Windows Mobile Device Center, Internet Explorer, MSN, Hotmail, Outlook, Excel, PowerPoint, Word, and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.

Wi-Fi is a registered trademark of the Wireless Fidelity Alliance, Inc.

microSD is a trademark of SD Card Association.

Java, J2ME and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.

Copyright © 2008, Adobe Systems Incorporated.

Copyright © 2008, Macromedia Netherlands, B.V.

Macromedia, Flash, Macromedia Flash, Macromedia Flash Lite and Reader are trademarks and/or registered trademarks of Macromedia Netherlands, B.V. or Adobe Systems Incorporated.

Copyright © 2008, JATAAYU SOFTWARE (P) LTD. All Rights Reserved.

Copyright © 2008, Dilithium Networks, Inc. All Rights Reserved.

Copyright © 2008, Tao Group Limited. All Rights Reserved.

ArcSoft MMS Composer™ Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved. ArcSoft & the ArcSoft logo are registered trademarks of ArcSoft, Inc. in the United States and/or other countries.

All other company, product and service names mentioned herein are trademarks, registered trademarks or service marks of their respective owners.

HTC shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from furnishing this material. The information is provided "as is" without warranty of any kind and is subject to change without notice. HTC also reserves the right to revise the content of this document at any time without prior notice.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in a retrieval system, or translated into any language in any form without prior written permission of HTC.

Important Health Information and Safety Precautions

When using this product, the safety precautions below must be taken to avoid possible legal liabilities and damages. Additional safety information can be found in the Appendix at the end of the user manual.

Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product.

To reduce the risk of bodily injury, electric shock, fire, and damage to the equipment, observe the following precautions.

ELECTRICAL SAFETY

This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product.

SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION

CAUTION: Connecting to improperly grounded equipment can result in an electric shock to your device.

This product is equipped with a USB cable for connecting the product to a desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting the product to the computer. The power supply cord of a desktop or notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.

SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT

- Use the correct external power source

A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product.

- Handle battery packs carefully

This product contains a Li-ion Polymer battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60^ C ( 140^ F).

WARNING: Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts, expose to temperature above 60^ C ( 140^ F), or dispose of in fire or water. Replace only with specified batteries. Recycle or dispose of used batteries according to the local regulations or reference guide supplied with your product.

SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT

Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 60^ C ( 140^ F), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.

PREVENTION OF HEARING LOSS

Caution: Avoid potential hearing loss

Prolonged exposure to loud sounds (including music) is the most common cause of preventable hearing loss. Some scientific research suggests that using portable audio devices, such as portable music players and cellular telephones, at high volume settings for long durations may lead to permanent noise-induced hearing loss. This includes the use of headphones (including headsets, earbuds and Bluetooth® or other wireless devices). Exposure to very loud sound has also been associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to sound and distorted hearing. Individual susceptibility to noise-induced hearing loss and other potential hearing problems varies.

The amount of sound produced by a portable audio device varies depending on the nature of the sound, the device, the device settings and the headphones. You should follow some commonsense recommendations when using any portable audio device:

• Set the volume in a quiet environment and select the lowest volume at which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people speaking near you or if the person sitting next to you can hear what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen to your portable device in a noisy environment, use noise-cancelling headphones to block out background environmental noise.
• Limit the amount of time you listen. As the volume increases, less time is required before your hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock concerts, that might cause temporary hearing loss. Temporary hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in your ears, hear muffled speech or experience any temporary hearing difficulty after listening to your portable audio device, discontinue use and consult your doctor.

You can obtain additional information on this subject from the following sources:

American Academy of Audiology 11730 Plaza American Drive, Suite 300

Reston, VA 20190

Voice: [phone]

Email: [e-mail]

Internet: www.audiology.org

National Institute on Deafness and Other Communication Disorders

National Institutes of Health

31 Center Drive, MSC 2320

Bethesda, MD USA 20892-2320

Voice: [phone]

Email: [e-mail]

Internet: http://www.nidcd.nih.gov/health/hearing

National Institute for Occupational Safety and Health

Hubert H. Humphrey Bldg.

200 Independence Ave., SW

Washington, DC 20201

Voice: 1-800-35-NIOSH (1-800-356-4674)

Internet: http://www.cdc.gov/niosh/topics/noise/default.html

SAFETY IN AIRCRAFT

Due to the possible interference caused by this product to an aircraft's navigation system and its communications network, using this device's phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off the phone by switching to Flight Mode.

ENVIRONMENT RESTRICTIONS

Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, chemical plants, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

EXPLOSIVE ATMOSPHERES

When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders.

ROAD SAFETY

Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using hands-free devices as an alternative is allowed.

SAFETY PRECAUTIONS FOR RF EXPOSURE

• Avoid using your device near metal structures (for example, the steel frame of a building).
• Avoid using your device near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories that do not contain any metal.
• Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided.

INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS

This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics.

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

HEARING AIDS

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives.

NONIONIZING RADIATION

This product should be operated in the suggested normal condition only to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.

GENERAL PRECAUTIONS

- Heed service markings

Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider.

• Damage requiring service

Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions:

• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the operating instructions.

- Avoid hot areas

The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including, but limited to, amplifiers) that produce heat.

- Avoid wet areas

Never use the product in a wet location.

- Avoid using your device after a dramatic change in temperature

When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.

NOTE: When taking the device from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the device to acclimate to room temperature before turning on the power.

- Avoid pushing objects into product

Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.

- Mounting Accessories

Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.

- Avoid unstable mounting

Do not place the product with an unstable base.

- Use product with approved equipment

This product should be used only with personal computers and options identified as suitable for use with your equipment.

- Cleaning

Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning, but NEVER use water to clean the LCD screen.

Contents

Chapter 1 Getting Started 11

1.1 Getting to Know Your XV6800 and Its Accessories 12
1.2 Battery Information 16
1.3 Starting Up 17
1.4 The Today Screen 18
1.5 Status Icons 18
1.6 The Start Menu 20
1.7 The Quick Menu 20
1.8 Programs 21
1.9 Settings 22

Chapter 2 Entering and Searching Information 25

2.1 Using the Hardware Keyboard 26
2.2 Entering Information 27
2.3 Using On-screen Keyboard 27
2.4 Using Letter Recognizer 28
2.5 Using Block Recognizer 28
2.6 Using Transcriber 28
2.7 Using Symbol Pad 29
2.8 Using Notes to Draw, Write, and Record Voice Notes 30
2.9 Searching Information 30

Chapter 3 Using Phone Features 31

3.1 Using the Phone 32
3.2 Making a Call 33
3.3 Receiving a Call 34
3.4 Smart Dialing 34
3.5 Voice Speed Dial 36
3.6 In-call Options 38
3.7 Additional Dialing Information 38

Chapter 4 Setting Up Your XV6800 39

4.1 Basic Settings 40
4.2 Personalizing Your XV6800 41
4.3 Customizing Phone Settings and Services 42

4.4 Protecting Your XV6800 43

4.5 Other Settings 44

Chapter 5 Synchronizing Information With Your Computer 47

5.1 About Synchronization 48

5.2 Setting Up Windows Mobile Device Center on Windows Vista® ...... 48

5.3 Setting Up ActiveSync on Windows XP ^® 50

5.4 Synchronizing With Your Computer 50

5.5 Synchronizing via Infrared and Bluetooth 52

5.6 Synchronizing Music and Video 52

Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 53

6.1 Contacts 54

6.2 Calendar 56

6.3 Tasks 57

6.4 Notes....59

Chapter 7 Exchanging Messages 61

7.1 Messaging 62

7.2 Text Messages 63

7.3 MMS Messages 65

7.4 Setting Up E-mail Accounts 69

7.5 Using E-mail 70

Chapter 8 Working With Company E-Mails and Meeting Appointments 75

8.1 Synchronizing Your Device with the Exchange Server 76

8.2 Working With Company E-mails 77

8.3 Managing Meeting Requests 80

8.4 Finding Contacts in the Company Directory 81

Chapter 9 Working With Documents and Files 83

9.1 Microsoft® Office Mobile 84

9.2 Adobe Reader LE 84

9.3 Copying and Managing Files 86

9.4 ZIP 87

Chapter 10 Getting Connected 89

10.1 Comm Manager 90

10.2 Connecting to the Internet 91
10.3 Internet Explorer Mobile 94
10.4 Bluetooth 95
10.5 Using Your XV6800 As a Modem (BroadbandAccess Connect) ...... 99

Chapter 11 Experiencing Multimedia 107

11.1 Using Camera 108
11.2 Using Pictures & Videos 116
11.3 Using Windows Media Player 118

Chapter 12 Managing Your XV6800 123

12.1 Adding and Removing Programs.... 124
12.2 Using Task Manager.... 124
12.3 Managing Memory 125
12.4 Checking System Information 126
12.5 Resetting Your XV6800 126
12.6 Battery Saving Tips 128

Chapter 13 Using Other Applications 129

13.1 Voice Speed Dial 130

Appendix 133

A.1 Specifications 134
A.2 Regulatory Notices 136
A.3 Additional Safety Information 141

Chapter 1

Getting Started

1.1 Getting to Know Your XV6800 and Its Accessories

1.2 Battery Information

1.3 Starting Up

1.4 The Today Screen

1.5 Status Icons

1.6 The Start Menu

1.7 The Quick Menu

1.8 Programs

1.9 Settings

1.1 Getting to Know Your XV6800 and Its Accessories

No.	Item	Function
1	MESSAGING Button	Press to access your messages.
2	Notification LED 1	This LED shows the following:• A blinking Blue light for Bluetooth system notification of powered-up and ready to transmit radio frequency signal.• A blinking Green light for Wi-Fi status.• When both Bluetooth and Wi-Fi are enabled, their lights blink alternately.
3	Earpiece	Listen to phone call.
4	Notification LED 2	This LED shows Green and Amber lights for CDMA standby and network status, notification, and battery charging status.
5	INTERNET EXPLORER Button	Press to open Internet Explorer Mobile.
6	Hardware Keyboard	This is a QWERTY-style keyboard just like the computer keyboard. Slide the touch-screen panel to the left to reveal the keyboard.
7	Touch Screen	Tap the screen with the stylus to write, draw, or make a selection.
8	Left and Right SOFT KEYS	Press to execute the command shown in the label above the button.
9	TALK Button	Press to answer an incoming call or dial a number.
10	START Button	Press to open the Start menu.
11	NAVIGATION Control/ ENTER	Press this multi-directional control up, down, left, or right to move through menus and program instructions; carry out the selection by pressing the center of this control.
12	OK Button	Press to confirm your data entries, or to exit the program in use.
13	END Button	Press to end a call or to return to the Today screen.

No. Item Function

14	Jog Wheel	While on the Today screen or using applications, scroll up or down to navigate through menus or program instructions; press the wheel to carry out a selection. During a call or while playing music, scroll up or down to adjust the sound volume.
15	OK Button Press to confirm your data entries, or to exit the program in use.
16	VOICE COMMAND Button Press to start Voice Speed Dial; press and hold to record a voice note.
17	WLAN Switch Slide up to turn Wi-Fi on, down to turn Wi-Fi off.
18	Camera Use the camera to take still photos and record video clips.
19	Flash Light	When turned on, it illuminates your subject and allows you to capture clear photos or video in dark-lit environments.
20	Speaker Listen to media.
21	Car Antenna Connector	Connect your device to the car antenna while in a car to have better reception quality.
22	Battery Cover Latch	Press downward to release the battery cover.

No. Item Function
23 Battery Cover	After pressing down the cover latch, remove the battery cover to access the battery compartment.
24 POWER Button • Press and hold to turn on the device.• Press to turn off the display temporarily. This switches your device to Sleep mode. You can still receive calls and messages when your device is in Sleep mode.• Press and hold (for about 5 seconds) to turn off the power completely. All functions including the phone will be unavailable for use.
25 COMM MANAGER Button	Press to open the Comm Manager. Comm Manager lets you easily turn on/off your device's connections (such as Bluetooth, Wi-Fi, and cellular data connection), ringer, phone, etc.
26 CAMERA Button	Press to launch the Camera; press again to take a photo or video clip, depending on the specified capture mode.
27 Stylus Use the stylus to write, draw, or select items on the touch screen.
28 microSD Card Slot Insert a microSD memory card for storing data.
29 Microphone	Speak into the microphone when receiving or making a phone call or voice recording.
30 Strap Holder Attach a strap for carrying your device.
31 Infrared Port Exchange files or data with other devices wirelessly.
32 RESET Button	With the stylus, press the RESET button to soft-reset your device.
33 Sync Connector/Earphone Jack	Connect the supplied power adapter to charge the battery or the USB cable to synchronize data with the PC. You can also plug in the provided splitter cable to allow the power adapter and your stereo headset to be connected to the device at the same time.

Accessories

Line drawing of a cable and plug device (no text or symbols)

Line drawing of a USB cable with two connectors (no text or symbols)

Line drawing of a connector with labeled terminals (no text or symbols beyond labels)

Simple line drawing of a rectangular frame with rounded corners and a central oval base (no text or symbols)

Line drawing of a pen with a pointed tip and handle (no text or symbols)

No. Accessory Function

1 AC adapter Recharges the battery.

2 Mini USB Cable Connects your device to a PC and synchronizes data.

3 USB Splitter Cable

Lets you connect the supplied power adapter and your stereo headset to the device. This allows you to charge the battery on your device or synchronize the device with your PC, and at the same time, listen to audio media.

4 Pouch Store your device in the pouch to keep it from dust and scratches.

5 Stylus An extra stylus pen is provided.

The USB Splitter Cable

Use the supplied USB Splitter Cable when you want to charge the battery on your device, and at the same time, use a standard 2.5mm stereo headset for hands-free conversation or for listening to music.

1.2 Battery Information

Always turn off your device before installing or replacing the battery. Follow the instructions in the Quick Reference Guide to install the battery.

Your device contains a rechargeable Li-ion polymer battery. This device is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including your wireless service provider's network configuration, signal strength, the temperature of the environment in which you operate your device, the features and/or settings you select and use, items attached to connecting ports, and your voice, data, and other program usage patterns.

Warning! To reduce risk of fire or burns:

• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire or water.
• Do not expose to temperatures above 60^ (140°F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulation.

To check the battery power

1. Power on your device.
2. Tap Start > Settings > Systems tab > Power.

Battery power information

Charge the battery

New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery in two ways:

• Charging your device's battery by using the power adapter.
• Connecting your device to a PC via the provided Mini USB cable.

Warning! Do not remove the battery from the device while you are charging it using the AC or car adapter.
- As a safety precaution, the battery stops charging when it overheats.

Low battery

When the low-battery warning appears, do the following:

• Immediately save your current data.
• Synchronize with your PC or connect the power adapter to charge the battery.
• Turn off your device.

1.3 Starting Up

Turn your device on and off

To turn on your device, press and hold the POWER button. When you turn on your device for the first time, a Quick Start Wizard will guide you through the screen calibration process and the setup of regional settings, date and time, and password. For more information about touch screen calibration, see "Calibrate the device". For information about setting a device password, see "Protecting Your XV6800" in Chapter 4.

To turn off your device, press and hold the POWER button for a few seconds. A message will then be displayed, prompting you whether or not to turn off the device completely.

Switching your device to Sleep mode

Quickly pressing the POWER button turns off the display temporarily and switches your device to Sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power.

Your device also automatically goes into Sleep mode when you leave the device idle after a certain amount of time.

To specify the timeout period before your device goes into Sleep mode

1. Tap Start > Settings > System tab > Power > Advanced tab.
2. Under On battery power, make sure the Turn off device if not used for check box is selected.
3. Select the battery timeout period, then tap OK.

You will still be able to receive messages and calls when your device is in Sleep mode. Your device wakes up automatically when you press POWER again or when there are new incoming calls/messages.

Calibrate the device

Calibrating the touch screen involves tapping the center of a cross with the stylus as the cross moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.

If your device does not accurately respond to screen taps, follow these steps to re-calibrate it:

1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, then follow the on-screen instructions to complete the calibration.

Manage screen settings

The device's display has the following orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows you to get a better view or a better operation of certain programs, while Landscape mode may be optimal for viewing lengthy files.

• To change the orientation, tap Start > Settings > System tab > Screen, and select the orientation you want.
• To smooth the edges of screen fonts for many programs, on the ClearType tab, select the Enable ClearType check box.
• To increase the readability or to see more content on the screen, on the Text Size tab, adjust the text size by moving the slider.

1.4 The Today Screen

The Today screen displays important information, such as upcoming appointments, number of new messages, and your tasks. You can tap an item on the Today screen to open the associated program.

• To access the Today screen, tap Start > Today.
- To customize the Today screen display, including the background image, tap Start > Settings > Personal tab > Today.

1 Tap to open the Start menu.
2 Tap to view connectivity status.
3 Indicates the radio signal strength. Tap to configure the phone settings.
4 Tap to adjust device/ringer volume.
5 Indicates the battery status. Tap to open the Power Settings screen.
6 Open Quick Menu (see "The Quick Menu" in this chapter for details).
7 Displays the current date and time. Tap to set up date, time, alarm, and more.
8 Getting Started provides a list of "how to's" that you can reference to learn basic features and settings of your device.
9 Tap to set owner information.
10 Indicates the incoming messages. Tap to open Messaging.
11 Displays the task(s) that you need to do. Tap to open Tasks.
12 Tap to lock the device. The icon changes to . Tap Unlock on the Today screen to unlock again.
13 Tap to purchase and download applications from the Internet.
14 Reminds you of the appointment(s). Tap to open Calendar.
15 Tap to toggle the screen between portrait and landscape orientation.
16 Tap to open Comm Manager.
17 Tap to open the Backlight Settings screen.
18 Tap to open Calendar.
19 Tap to open Contacts.

1.5 Status Icons

The following are some of the status icons that you may see on the device.

Icon Description
	New e-mail or text messages
	New voice mail
	New MSN message
	There are more notifications. Tap the icon to view all.
	Speakerphone on
	Voice call in progress
	Missed call
	Maximum signal strength
	No signal
	Phone is turned off
Icon	Description
	No phone service
	Searching for phone service
	1xRTT available
	EVDO available
	Data connection is active and transmitting data
	Data connection is active but idle
	Roaming
	Connection is active
	Connection is not active
	Synchronization in progress
	Synchronization error
	ActiveSync notification
	Wi-Fi function enabled, but device not connected to a wireless network yet
	Wireless network(s) detected
	Connecting to wireless network (arrows moving); Connected to wireless network
	Synchronizing via Wi-Fi
	Vibration mode
	Sound on
	Sound off
	Alarm
	Device is locked
	Device is unlocked
	Battery is fully charged
	Battery power is very low
	Battery charging
	Portrait mode
	Landscape mode
	Bluetooth headset detected
	Serial USB connection active

Note The USB to PC (☐) icon appears on the Today Screen when your device is connected to your computer and you enable a serial USB connection between them. For more information about USB to PC, see "Sync connection problem" in Chapter 5.

1.6 The Start Menu

The Start Menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus.

1 Tap to switch to the Today screen.
2 Tap to start a program. The items displayed in the Start menu can be customized by tapping Start > Settings > Personal tab > Menus.
3 Tap to start a recently-used program.
4 Tap to view and select more programs that are installed on your device.
5 Tap to change device settings.
6 Tap to see a Help topic for the current screen.

1.7 The Quick Menu

The Quick Menu, located at the top right corner of the Today screen, shows the currently running programs. You can quickly switch between running programs and stop programs when you do not need to use them.

1 Stop all currently running programs.
2 Customize Task Manager settings. (See "Using Task Manager" in Section 13.)
3 Display the percentage of memory in use. Tap this icon to view more information about memory usage.
4 Tap this button to open the Quick Menu.

1. To switch to a running program, tap the program name.

• To stop running a program, tap

1.8 Programs

The following are some of the programs that are already installed on your device.

Programs in the Start menu

Icon Description

	Calendar Allows you to keep track of your appointments and create meeting requests.
	Contacts Allows you to keep track of your friends and colleagues.
	Get Applications Links you to a web site where you can purchase and download programs that you can install on your device.
	Internet Explorer Mobile Allows you to browse Web and WAP sites as well as download new programs and files from the Internet.
	Messaging Allows you to send and receive e-mail, MMS, and text messages.
	Phone Lets you make and receive calls, switch between calls, and set up conference calling.
	Help Displays help information for the current screen.

Programs screen

Icon Description

	Games Lets you play two pre-installed games: Bubble Breaker and Solitaire.
	Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device.
	Excel Mobile Creates new workbooks or view and edit Microsoft® Office Excel® workbooks.
	OneNote Mobile Creates notes with text, photos, and voice recordings.
	PowerPoint Mobile Views Microsoft® Office PowerPoint® slides and presentations.
	Word Mobile Creates, views, and edits Microsoft® Office Word documents.
	ActiveSync Synchronizes information between your device and a PC or the Exchange Server.
	Adobe Reader LE Enables you to view PDF (Portable Document Format) files on your device.
	Calculator Lets you perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division.
	Camera Snaps photos or shoots video clips accompanying audio.
	File Explorer Enables you to organize and manage files on your device.
	Getting Started Views a list of "how to's" that you can reference to learn basic features and settings of your device.
	Modem Link Activates your device as a modem for your notebook computer.
	Notes Allows you to create handwritten or typed notes, drawings, and recordings.
	Pictures & Videos Lets you view and manage your picture and video files on your device or a storage card.
	Remote Desktop Mobile Connects to and controls your desktop computer remotely with your device.
	Running Programs Allows you to check which programs are currently running and stop running programs to free up memory space.
	Search Enables you to search contacts, data, and other information on your device.

广力云智慧零售收银系统

Pro

Icon Description

Games Lets you play two pre-installed games: Bubble Breaker and Solitaire.

Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device.

Excel Mobile Creates new workbooks or view and edit Microsoft® Office Excel® workbooks.

OneNote Mobile Creates notes with text, photos, and voice recordings.

PowerPoint Mobile Views Microsoft® Office PowerPoint® slides and presentations.

Word Mobile Creates, views, and edits Microsoft® Office Word documents.

ActiveSync Synchronizes information between your device and a PC or the Exchange Server.

Adobe Reader LE Enables you to view PDF (Portable Document Format) files on your device.

Calculator Lets you perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division.

Camera Snaps photos or shoots video clips accompanying audio.

File Explorer Enables you to organize and manage files on your device.

Getting Started Views a list of "how to's" that you can reference to learn basic features and settings of your device.

Modem Link Activates your device as a modem for your notebook computer.

Notes Allows you to create handwritten or typed notes, drawings, and recordings.

Pictures & Videos Lets you view and manage your picture and video files on your device or a storage card.

Remote Desktop Mobile Connects to and controls your desktop computer remotely with your device.

Running Programs Allows you to check which programs are currently running and stop running programs to free up memory space.

Search Enables you to search contacts, data, and other information on your device.

Icon Description

Tasks Allows you to keep track of your tasks.

Text Messages Retry Resends SMS messages that failed delivery.

Voice Speed Dial Allows you to record voice tags so that you can dial a phone number or launch programs simply by speaking a word.

Voice Speed Dial Switch Enables or disables Voice Speed Dial to be launched when the VOICE COMMAND button is pressed.

Windows Media Player Mobile Lets you play back audio and video files.

Wireless Sync This software from Verizon Wireless allows you to synchronize and view e-mails, and access information such as as calendar appointments, contacts, tasks, etc. that are stored on your device.

ZIP Enables you to save memory and free up storage space on your device by compressing files in the conventional ZIP format.

1.9 Settings

You can adjust the device settings to suit the way you work. To see all available settings, tap Start > Settings, then tap the Personal, System, and Connections tabs located at the bottom of the screen.

Pseronal tab

Icon Description

Buttons Assigns a program to a hardware button.

Input Sets options for each of the input methods.

Lock Sets a password for your device.

Menus Sets what programs will appear in the Start menu.

Owner Information Allows you to enter your personal information on your device.

Phone Allows you to customize phone settings such as ring tone, optional phone services, and more.

SlidingSound Allows you to select a slide-in and slide-out sound for the hardware keyboard.

Sounds & Notifications Enables sounds for events, notifications, and more, and allows you to set the type of notification for different events.

Today Allows you to customize the appearance and the information to be displayed on the Today screen.

Voice Speed Dial Allows you to create voice tags for voice dialing contacts as well as for launching programs.

Sytem tab

Icon Description

[5308]	About Allows you to specify a name for your device. Also shows the Windows Mobile version and copyright information.
	Backlight Sets the backlight timeout and brightness.
	Certificates Shows information about certificates that are installed on your device.
[30SW]	Clear Storage Removes all your data and files from the memory and resets your device to factory default settings.
[CBKX]	Clock & Alarms Switches the device clock to the date and time of your locale or to a visiting time zone when you're traveling. Alarms can also be set at specified days and times of a week.
	Customer Feedback Allows you to send feedback to the Customer Experience Improvement Program of Microsoft.
[5KNX]	Device Information Shows information about the firmware version, hardware, identity, and the duration of calls made on your device.
	Encryption Enables or disables encryption of files on your storage card. Encrypted files will be readable only on your device.
	Error Reporting Enables or disables the device's error reporting function. When this function is enabled and a program error occurs, technical data about the state of the program and your computer will be logged in a text file and delivered to Microsoft's technical support if you choose to send it.
	External GPS Sets the appropriate GPS communication ports, if required. You may need to do this when there are programs on your device that access GPS data or you have connected a GPS receiver to your device. See Help for details.
	Key Lock Locks the buttons on your device except for the POWER button when the device is in Sleep mode. This ensures you will not switch the device on by accident and consume unnecessary power.
[BBCK]	Managed Programs Downloads and installs applications that are deployed by the System Center Mobile Device Manager. This program also lets you view applications which were installed from the System Center Mobile Device Manager.
	Memory Shows the device memory allocation status and memory card information. Also allows you to stop currently running programs.
[50Y8]	Power Shows the current battery level. Also allows you to set the timeout for turning off the display (switching device to Sleep mode) to conserve battery power.
	Regional Settings Sets the regional format to use for displaying numbers, currency, date, and time on your device.
[KDYS]	Remove Programs Lets you remove programs that you installed on your device.
	Screen Allows you to change the screen orientation, re-calibrate the screen, and change the screen text size.
[0CAT]	Task Manager Stops running programs and sets the Exit button (×) to end programs immediately when you tap the button. For more information, see "Using Task Manager" in Chapter 12.
	Text Messaging Configures the text message feature as Threaded mode or Classic mode.
[6AT]	Windows Update Link to Microsoft's Web site and update Windows Mobile on your device with the latest security patches or fixes.

Connections tab

Icon Description

Beam Enables your device to receive incoming infrared and Bluetooth beams.

Bluetooth Turns Bluetooth on, sets your device to visible mode, and allows you to scan for other Bluetooth devices.

Comm Manager Allows you to manage the device's connections (including Bluetooth, Wi-Fi, and cellular data connection), turn the phone function on or off, change to ringer or vibration mode, and more.

Connections Sets up one or more types of modem connections for your device, such as phone dial-up, Bluetooth, and more, so that your device can connect to the Internet or a private local network.

Domain Enroll Enrolls your device with your company's domain to access company resources.

USB to PC Sets the USB connection between your device and PC, and helps with problems connecting ActiveSync.

Wi-Fi Allows your device to scan for available wireless networks.

Wireless LAN Shows information about the active wireless network, and allows you to customize Wi-Fi settings.

Chapter 2

Entering and Searching Information

2.1 Using the Hardware Keyboard

2.2 Entering Information

2.3 Using On-screen Keyboard

2.4 Using Letter Recognizer

2.5 Using Block Recognizer

2.6 Using Transcriber

2.7 Using Symbol Pad

2.8 Using Notes to Draw, Write, and Record Voice Notes

2.9 Searching Information

2.1 Using the Hardware Keyboard

Your device provides you with a QWERTY keyboard, which is similar to a standard keyboard on your PC.

When you slide open the hardware keyboard, the screen automatically changes to landscape view. The screen changes back to portrait view when you close the hardware keyboard.

You can do the following with the QWERTY keyboard:

• To type lowercase letters, press the keys using your thumbs or fingers.

- To turn on Caps Lock mode so that you can type all uppercase letters, press the Function Key (☐) first, then press Caps Lock mode. The Shift Key/Caps Lock LED lights up to indicate that Caps Lock mode is enabled. To turn off Caps Lock mode, press these buttons again.

• To type a single uppercase letter, press Cap Shift and then press the desired letter.

• To enter a number or symbol (labeled in color on the keys), press and then press the corresponding key.

• To open the Symbol Pad, press and then press Sym .Tab

- Press the Left/Right SOFT KEY (/) to perform the command shown in the label above the key.

- Press to verify your data entries or exit the program in use.

- Press to open the Start menu.

- Press the arrow keys '← for directional movement.

- To type accented characters (like á, ǎ, ç, ê, í, ó, ü, etc), press the letter key first, then hold and at the same time press the space bar several times until you find the correct character you need.

2.2 Entering Information

When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar.

Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is then displayed and you can use it to enter text. To toggle between showing and hiding the Input Panel, simply tap the Input Panel icon.

Icon Input method

On-screen Keyboard

Letter Recognizer or Block Recognizer

Symbol Pad

Transcriber

2.3 Using On-screen Keyboard

The on-screen Keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen.

To enter text using the on-screen Keyboard

1. In a program, tap the Input Selector arrow, and tap Keyboard.
2. Enter text by tapping keys on the on-screen Keyboard.

To increase or decrease the size of the keyboard keys

1. Tap the Input Selector arrow, then tap Options.
2. In the Input method list, select Keyboard.
3. Select Large keys or Small keys.

2.4 Using Letter Recognizer

With Letter Recognizer, you can write individual letters, numbers, and punctuation, which are then converted into typed text.

To use Letter Recognizer

1. From a program, tap the Input Selector arrow, and tap Letter Recognizer.

2. Write characters, numbers, and symbols in the designated writing area.

3. Enter capital letters by writing in the ABC (left) area of the box.

4. Enter lower case letters by writing in the abc (middle) area of the box.
5. Enter numbers by writing in the 123 (right) area of the box.
6. Enter punctuation and symbols by tapping in either area of the box and then writing the desired character.

Note Letter Recognizer is available when text entry is possible.

Tip For help with writing characters, tap the question mark near the writing area.

2.5 Using Block Recognizer

With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text.

To use Block Recognizer

1. From a program, tap the Input Selector arrow, and tap Block Recognizer.

2. Write characters, numbers, and symbols in the designated writing area.

3. Enter letters by writing in the abc (left) area of the box.

4. Enter numbers by writing in the 123 (right) area of the box.
5. Enter symbols and punctuation by tapping in either area of the box and then writing the desired character.

Note Block Recognizer is available when text entry is possible.

Tip For help with writing characters with Block Recognizer, tap the question mark near the writing area.

2.6 Using Transcriber

Transcriber is a handwriting recognition program that allows you to write in cursive, print, or a combination of both. Transcriber works transparently in the background of programs, recognizing words with its integrated dictionary. When Transcriber is turned on, it interprets stylus movement anywhere on the screen as handwriting input. For more information about using Transcriber, see Help on your device.

To start Transcriber

1. Start a program that accepts user input, such as Word Mobile.
2. Tap the Input Selector arrow, and tap Transcriber. The Transcriber introductory screen appears.

To write using Transcriber

1. In a program, position the cursor where you want text to appear.
2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen.

To enter punctuation and symbols

Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text.

- From a program, tap on the Transcriber toolbar.

The keyboard remains visible until you tap the button again.

Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location.

- When no text is selected, you can also open the keyboard by doing the J gesture. For more information about using Transcriber gestures, see Help on your device.

To edit text

1. In a program, draw a line across the text you want to edit.
2. After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted.
3. Do either of the following:
4. Rewrite the text.
5. Use gestures to capitalize letters, insert a space, and so on. For information about using Transcriber gestures, see Help on your device.

2.7 Using Symbol Pad

Symbol Pad provides a comprehensive list of common symbols such as parentheses, brackets, currency signs, and more, as well as punctuation marks and special characters.

To open the Symbol Pad and select a symbol

1. Create or open a document, such as a Word document.

2. To open the Symbol Pad:

3. Tap the Input Selector arrow, then tap Symbol Pad; or
   • Using the hardware keyboard, pres s and then press

4. To browse through the pages of symbols, tap ↗ on the Symbol Pad screen.

5. Tap a symbol to select it and close the Symbol Pad. The selected symbol will then be inserted in your document.

2.8 Using Notes to Draw, Write, and Record Voice Notes

Using Notes, you can draw directly on the screen, or write on the screen and save notes in your own handwriting. You can also create a stand-alone recording (voice note) or you can add a recording to a note.

For more information on what you can do with Notes, see "Notes" in Chapter 6.

2.9 Searching Information

You can search for files and other items stored in My Documents folder or on an installed storage card of your device. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help.

To search for a file or an item

1. Tap Start > Programs > Search.

2. In the Search for field, you can:

3. Enter the file name, word, or other information you want to search for.

4. Tap the down arrow icon (▼), and from the list, select one item that you have looked for before.

5. In the Type field, you can tap the down arrow icon (▼) and select a data type from the list to help narrow your search.

6. Tap Search. The system then starts searching the matched files in the My Documents folder and subfolders.
7. In the Results list, tap the item you want to open.

Note The storage card symbol ( [icon] or [redacted] ) is displayed next to the names of files saved on a storage card.

Chapter 3

Using Phone Features

3.1 Using the Phone

3.2 Making a Call

3.3 Receiving a Call

3.4 Smart Dialing

3.5 Voice Speed Dial

3.6 In-call Options

3.7 Additional Dialing Information

3.1 Using the Phone

Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send SMS/MMS messages. You can also dial directly from Contacts.

The Phone screen

From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following:

- Press the TALK button ( ).

- Directly dial the phone number by pressing numeric keys on the hardware keyboard.

- Tap Start > Phone.

Turn the phone function on and off

In many countries, you are required by law to turn off your phone while on board an aircraft.

To turn off the phone function, do one of the following:

- Tap the Signal icon (☐) then tap Comm Manager, or tap the Comm Manager icon (☐) on the Today screen. On the Comm Manager screen, tap the Phone button (☐) to turn off the phone function.

To resume call function, turn on the phone function by tapping the Phone button ( ) again on the Comm Manager screen.

- Open Comm Manager, then tap the Flight Mode button ( ) to enable flight mode . This turns off all wireless radios on your device, which include the phone function, Bluetooth, and Wi-Fi.

To resume call function, disable flight mode by tapping the Flight Mode button ( ) again. This also restores the previous state of Bluetooth and Wi-Fi.

Adjust the device volume

1. Tap the Speaker icon (◀)

2. Under Volume, do the following:

- Adjust the phone volume ( 🎨 ) or device volume ( 📄 ) by moving the slider to the desired volume level.

- Tap On, Vibrate, or Off to change both the system and ringer volume settings.

Notes • To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels.

- When you activate Vibrate mode, sound will automatically be muted and your device will vibrate when an incoming call is received. The Vibrate icon (which will appear in the title bar to indicate that Vibrate mode is activated

Volume adjustment

3.2 Making a Call

With your device, you can make a call from Phone, Contacts, Speed Dial, and Call History.

Make a call from Phone

1. Tap Start > Phone.
2. On the Phone screen, tap the desired phone number, and tap Talk.

Phone screen

Tips • If you tap a wrong number, tap the Back arrow ( ) to erase each subsequent digit of a number. To erase the entire number, tap and hold the Back arrow.
- The icons on the upper right of the Phone screen indicate the battery power level and optional phone services. For more information about optional phone services, see Chapter 5.

Make a call from Contacts

Tap Start > Contacts, then do one of the following:

• Tap the desired contact in the contacts list, and tap the phone number that you want to call.
• Tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile.
• Press NAVIGATION up or down or roll the Jog Wheel to select a contact, and press TALK twice (once to send the number to the Phone keypad, and once to dial the number).

To choose one of the numbers of a contact to dial

By default, the mobile telephone number (m) of a contact is dialed when you make a call from Contacts. However, you can specify that a different phone number is dialed instead.

1. Tap Start > Contacts.
2. Press NAVIGATION up or down to select a contact.
3. Press NAVIGATION left or right. The letters representing the number will change as you scroll through them.

Make a call from Call History

1. On the Phone screen, tap Call History.
2. Scroll to the desired contact or phone number, and tap Call.

Make a call from Speed Dial

Use Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can simply tap and hold abc2 on the Phone screen to dial the contact's number. Before you can create a Speed Dial entry, the number must already exist in Contacts.

To create a Speed Dial entry

1. On the Phone screen, tap Menu > Speed Dial.
2. Tap Menu > New.
3. Tap a contact. Select the phone number that you want to add to Speed Dial.
4. In the Location box, select an available location for the new Speed Dial entry.

Note Location 1 is generally reserved for your voice mail, and Speed Dial will designate the next available location by default. If you want to place a phone number in a position that is already occupied, the new number will replace the number that is already there.

Tips • To create a Speed Dial entry from Contacts, tap and hold the contact name, tap Add to Speed Dial, then select the phone number for which to create a Speed Dial and an available location for the new Speed Dial entry.

• To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry, and tap Delete.

3.3 Receiving a Call

When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call.

To answer or reject an incoming call

• To answer the call, tap Answer, or press TALK ( ) on the device.
• To reject the call, tap Ignore, or press END ( ) on the device.

To end a call

Once an incoming or outgoing call is in progress, you can tap End or press END ( ) on the device to hang up.

3.4 Smart Dialing

Smart Dialing is a program that makes it easy for you to dial a phone number. When you start entering numbers or characters, Smart Dialing will automatically search and sort the contact entries in Contacts and the phone numbers in Call History (including incoming, outgoing, and missed calls). You can then select the desired number or contact from the filtered list to dial.

Start Smart Dialing

Open the Phone screen, then use the Phone keypad or hardware keyboard to enter the phone number or contact name you want to call.

When you start entering a number or letter, the Smart Dialing panel will appear automatically on the Phone screen. You can change the panel size according to your needs by tapping the arrow icon.

Minimized Smart Dialing panel Expanded Smart Dialing panel

Tips on using Smart Dialing

Smart Dialing starts looking for numbers or contacts that match the sequence you have entered. Below are some tips on how to use Smart Dialing to quickly find a desired phone number or contact.

To find a phone number

• Simply enter the first one or two digits to find a phone number in Call History.
• Enter the first three digits or more if you want to find a phone number from the saved contacts on your device.

To find a contact name

You can just enter the first letter of a contact's first name or surname. Smart Dialing will search for the letter starting from the first character of a contact name as well as from the character that appears after a space, dash, or underscore in a contact name. For example, if you tap number "2" which is associated with [a, b, c] on the Phone keypad, contact names such as the following will be considered matches: "Ben Miller", "George Adams", "John-Carter", "Carter, Ellen", "Dixon, Allan", "Thomas_Clark", "JaneCampbell".

If the matching list is long and you want to narrow down the search further, enter another letter. Using the same example above, if you continue to tap "3" which is associated with [d, e, f], the matching list will be narrowed down to the following names: "Ben Miller", "George Adams", "Carter, Ellen", "Dixon, Allan".

Make a call or send a text message using Smart Dialing

1. Begin entering the first few numbers or characters.
2. In the Smart Dialing panel, browse the list by tapping the arrows

(7), pressing NAVIGATION up or down, or rolling the Jog Wheel to select the desired contact or phone number. When a contact is selected, it expands to also show the corresponding phone number.

1. The highlighted item will move one line when you press NAVIGATION up or down or roll the Jog Wheel; the highlighted item will scroll one page when you tap the arrows.

2. Do one of the following:

3. When the correct contact is selected, tap Talk or press the TALK button ( ) to make a voice call.

4. To call a different phone number associated with the selected contact, tap and hold the selected contact, and tap the phone number you want to call.

Tap and hold the contact to pop up the shortcut menu

- To send a text message to the selected contact, tap and hold the contact, and tap Send Text Message.

Tip To view or edit information associated with the selected contact, tap the contact's name on the shortcut menu.

Set up Smart Dialing

1. On the Phone screen, tap Menu > Smart Dialing Options.

2. On the Options tab, select the Enable Smart Dialing check box.

3. Select the Automatically expand selected contact check box to enable a contact's name and phone number to be displayed when the contact is selected in the matching list.

4. Select the Enable drag-scroll check box to scroll in the matched list by dragging.
5. Select the Enable double-click for dialing check box to make a voice call by double-tapping the item in the matched list.
6. Select the Expand panel when using hardware keyboard check box to automatically expand the Smart Dialing panel when you are using the sliding keyboard to input.
7. In Scroll unit, you can set the amount of scrolling when tapping the arrows ( / ).

3.5 Voice Speed Dial

You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word.

Create a voice tag for a phone number

1. Tap Start > Contacts to open the Contacts list.

2. Do one of the following:

3. Tap and hold the desired contact, then tap Add Voice Tag.

4. Select the desired contact, then tap Menu > Add Voice Tag.

5. Tap the desired contact to open the contact's detailed screen, then tap Menu > Add Voice Tag.

6. Select the phone number that you want to create a voice tag, then tap the Record button (☐).

1. When completed, a Voice Tag icon (💡) will be displayed on the right of the item.

2. When you create a voice tag for the item, you can do one of the following:

3. Tap the Record button (☐) to rebuild the voice tag.

4. Tap the Play button (▶) to play the voice tag.
5. Tap the Delete button ( ) to delete the voice tag.

Tip To ensure voice recognition accuracy, please record your voice in a quiet place.

Create voice tag for a program

1. Tap Start > Settings > Personal tab > Voice Speed Dial.
2. The Application tab displays a list of all installed programs on your device. The procedure for creating a voice tag for a program is the same as the procedure for creating a voice tag for a phone number.
3. After you have created a voice tag for a program, you can then launch the program by saying the recorded voice tag after pressing the VOICE COMMAND button.

Make a call or launch programs using voice tags

1. Press the VOICE COMMAND button.
2. After a "beep" sound, say the recorded voice tag that you have assigned to the phone number you want to call or the program you want to launch. The system will repeat the voice tag and then dial out or launch the program automatically.

Note If the system cannot recognize your voice tag, please speak clearly and reduce the surrounding noise, then try again.

To view and test the voice tags you have created

1. Tap Start > Settings > Personal tab > Voice Speed Dial.

2. The Voice Tag tab displays a list that contains all the voice tags you have created. Select an item in the list, and you can do one of the following:

3. Tap the Record button (☐) to rebuild the voice tag.

4. Tap the Play button (▶) to play the voice tag.
5. Tap the Delete button ( ) to delete the voice tag.

3.6 In-call Options

To put a call on hold

Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties.

1. Tap Answer to take the second call, and put the first one on hold.
2. To end the second call and return to the first call, tap End or press END ( ) on the device.

To switch between two calls

- Press TALK ( ) on your device.

To set up a conference call

To set up a conference call, the second call must be an outgoing call.

1. Place the first call or take an incoming call.
2. Put the call on hold then dial a second number.
3. Press TALK ( ) on your device to join the two calls into a conference call.

Note Not all service providers support conference calling. Contact your service provider for details.

To turn on and off the Speakerphone

The built-in Speakerphone on your device allows you to talk hands-free or lets other people listen to the conversation.

• During a call, tap Speaker On, or press and hold TALK ( ) until the speakerphone turns on. The speakerphone icon ( ) appears in the title bar.
• To turn off the speakerphone, tap Speaker Off, or press and hold TALK ( ) again until the speakerphone turns off.

Warning! To avoid damage to your hearing, do not hold your device against your ear when the Speakerphone is turned on.

To mute a call

You can turn off the microphone during a call, so that you can hear the caller but the caller cannot hear you.

• During a call, tap Mute.
- When the microphone is turned off, the mute icon (✗) appears on the screen. Tap Unmute to turn on the microphone again.

3.7 Additional Dialing Information

Make an emergency call

- Enter the international emergency number for your locale, and tap Talk.

Make an international call

1. Tap and hold □.0 on the Phone keypad until the + sign appears. The + replaces the international prefix of the country that you are calling.
2. Enter the full phone number you want to dial, and tap Talk. The full phone number includes country code, area code (without the leading zero, if any) and phone number.

Chapter 4

Setting Up Your XV6800

4.1 Basic Settings

4.2 Personalizing Your XV6800

4.3 Customizing Phone Settings and Services

4.4 Protecting Your XV6800

4.5 Other Settings

4.1 Basic Settings

Owner information

Having owner information displayed on the Today screen makes it easier for someone to return your device to you if it is lost.

To enter owner information

1. Tap Start > Settings > Personal tab > Owner Information.
2. On the Identification tab, enter your personal information.

Tip If you don't see owner information on the Today screen, tap Start > Settings > Personal tab > Today. On the Items tab, select the Owner Info check box.

To display owner information when the device is turned on

You can set your XV6800 to display the 'my info' screen when it is turned on. This screen shows your complete personal information.

1. Tap Start > Settings > Personal tab > Owner Information.
2. On the Options tab, select the Identification information check box.
3. If you want additional text displayed, tap the Notes tab and enter the text (for instance: Reward if found).
4. On the Options tab, select the Notes check box.
5. Tap OK.

Time and date

To set the time and date

1. Tap Start > Settings > System tab > Clock & Alarms > Time tab.
2. Select the correct time zone and change the date or time.

Note During synchronization, the time on your device is updated with the time on your PC. For information about synchronizing with the PC, see Chapter 5.

To set the time and date for a different location

If you visit or communicate with someone in a particular time zone often, you can select it as your visiting time zone.

1. Tap Start > Settings > System tab > Clock & Alarms > Time tab.
2. Tap Visiting.
3. Select the correct time zone and change the time or date.

Regional settings

The style in which numbers, currency, dates, and times are displayed is specified in regional settings.

To change regional settings

1. Tap Start > Settings > System tab > Regional Settings.
2. On the Region tab, select your region from the list.

Note This does not change the Operating System language of your device.

1. The region you select determines which options will be available on the other tabs.
2. To customize settings further, tap the appropriate tabs and select the desired options.

4.2 Personalizing Your XV6800

The Today screen shows your upcoming appointments, active tasks, and information about incoming messages. You can customize the Today screen on your XV6800.

To customize the Today screen

1. Tap Start > Settings > Personal tab > Today.
2. On the Appearance tab, select the desired theme for the background of the Today screen.
3. On the Items tab, select the items you want to appear on the Today screen.

Tip To change the order of items displayed on the Today screen, tap the item, and tap Move Up or Move Down.

To add a custom background image

You can use one of your own pictures as the background image on the Today screen. Be aware that pictures can affect the readability of text on the Today screen.

1. Tap Start > Settings > Personal tab > Today.
2. Select the Use this picture as the background check box, and tap Browse to view a list of your picture files.
3. Tap the file name of the picture you want to use.
4. Tap OK.

To set options for displaying appointments on the Today screen

If you have a large number of appointments, you may want to specify the kind of appointments that are displayed on the Today screen.

1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Calendar and tap Options.

4. Do any of the following:

5. Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments.

6. Clear the Display all day events check box if you do not want to display all-day events.

To set options for displaying tasks on the Today screen

If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen.

1. Tap Start > Settings > Personal tab > Today.
2. Tap the Items tab.
3. Select Tasks and tap Options.
4. Do any of the following:

• Under Display number of, select the type of tasks you want to appear on the Today screen.
- In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks.

Customize the Start menu

You can choose which items appear in the Start menu.

1. Tap Start > Settings > Personal tab > Menus.
2. Select the check boxes of the items you want to appear in the Start menu. You can select up to seven items.

Tip You can also create folders and shortcuts to appear on the Start menu. Connect your XV6800 with your PC, then in Windows Explorer of your PC, double-click My Windows Mobile-Based Device >Windows >Start Menu and create the folders and shortcuts that you want. You will see the added items after you synchronize. For more information about synchronizing with the PC, see Chapter 5.

4.3 Customizing Phone Settings and Services

You can customize phone settings, such as the ring type and ring tone to be used for incoming calls, and the keypad tone to be used when entering phone numbers. You can also customize phone services.

To access phone settings and services

• Tap Start > Phone, then tap Menu > Options on the Phone screen; or
• Tap Start > Settings > Phone.

Ringer and tone settings

To change the ring tone

1. On the Phone screen, tap Menu > Options > Phone tab.
2. In the Ring tone list, tap the sound you want to use.

Tip To use custom *.wav, *.mid, *.mp3, or *.wma files as ring tones, use ActiveSync on your PC to copy the files to the ../Windows/Rings folder on your device. Next, select the sound from the Ring tone list. For more information about copying files to your device, see "Copying Files" later in this chapter.

To change the ring type

You can change the way you are notified of incoming calls. For example, you can choose to be notified by a ring, a vibration, or a combination of both.

1. On the Phone screen, tap Menu > Options > Phone tab.
2. In the Ring type list, tap the desired option.

Keypad tone

You can change the tone you hear when entering a phone number on the keypad. If set to Long tones, the tone is heard continuously for as long as the number on the keypad is pressed. Use this setting if you are having trouble accomplishing tasks that rely on tones from your phone such as accessing messages from an answering machine. If set to Short tones, the tone is heard only for one or two seconds. If set to Off, no tone will be heard.

1. From the Phone keypad, tap Menu > Options > Phone tab.
2. In the Keypad list, tap the option you want.

Optional phone services

Optional phone services can be easily activated and used on your device if provided by your wireless service provider. Contact your service provider first to ask about the availability of these services.

To enable optional phone services

1. Tap Start > Settings > Personal tab > Phone > Services tab.
2. Select the service you want to use, then tap Get Settings.
3. Select desired options for the service, then tap OK.

The following are some of the optional phone services that you may find on your device. For more information about how to customize the settings of each service, see Help on your device.

Phone Services Usage
Location Setting	Allow the mobile phone network to detect your current location via your device's built-in GPS chip. This is especially useful in times of emergency.On the upper right of the Phone screen, one of these icons will be shown:⊕ Location ON (your location can be detected)⊕ 911 ONLY (your location cannot be detected except by 911)
Voice Privacy	Protect conversations from possible eavesdropping, especially when you're roaming. This prevents devices such as scanners to pick up your frequency.
Network Service	Choose to accept roaming or restrict your device to phone calls from your home network only.
TTY Mode	Allow the use of a TTY (teletypewriter) device with the PDA phone for users who are visually or hearing impaired.
Time Synchronization	Choose whether or not to synchronize the time on your device with the mobile network.

Tip For more information about how to customize the settings of optional phone services, see Help on your device.

4.4 Protecting Your XV6800

Protect your device with a password

You can prevent unauthorized access to your device by using password protection. To keep your data more secure, you can set your device to prompt for a password every time the device is turned on or when your device has been idle after a specified amount of time.

1. Tap Start > Settings > Personal tab > Lock.
2. Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be idle before a password is required. In the Password type box, select the type of password you would like to use. Enter the password and, if necessary, confirm the password.
   If your device is configured to connect to a network, use an alphanumeric password for increased security for your device.
3. On the Hint tab, enter a phrase that will help you remember your password, but does not allow others to guess your password.
   The hint will be displayed after the wrong password is entered four times.
4. Tap OK. The next time the device is turned on, you will be prompted to enter your password.

Notes • Each time a wrong password is entered, the device response time gets longer until the device appears to be not responding.
- If you forget your password, you must follow the instructions in this user manual to clear the memory before you can access your device.

To change your password

1. Tap Start > Settings > Personal tab > Lock. You will be prompted to enter your current password.
2. In the Password box, enter your new password.
3. Tap OK.

Encrypt files on your storage card

You can set your device to encrypt files as they are saved on the storage card.

1. Tap Start > Settings > System tab > Encryption.
2. Select Encrypt files placed on storage cards.

Notes • Encrypted files can only be read on the device that encrypted them.

- Encrypted files are opened just like other files, provided you are using the device that encrypted them. There is no separate step for you to take to read these files.

Important If Encrypt files placed on storage cards is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

4.5 Other Settings

Device name

The device name is used to identify the device in the following situations:

• Synchronizing with a PC
- Connecting to a network
• Restoring information from a backup

Note If you synchronize multiple devices with the same PC, each device must have a unique name.

To change the device name

1. Tap Start > Settings > System tab > About.
2. Tap the Device ID tab.
3. Enter a name.

Note The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words.

Display settings

To adjust brightness

1. Tap the Backlight icon (☐) on the Today screen, or tap Start > Settings > System tab > Backlight.
2. On the Brightness tab, move the slider right to increase the brightness, or left to decrease the brightness.

To set the backlight to dim after a time delay

1. Tap the Backlight icon (☐) on the Today screen, or tap Start > Settings > System tab > Backlight.
2. Tap the Battery power tab, or the External power tab.
3. Select the Turn off backlight if device is not used for check box, and specify the time delay.

To increase or decrease the size of text on the screen

1. Tap Start > Settings > System tab > Screen > Text Size tab.
2. Move the slider to increase or decrease the text size.

Button settings

To reassign programs or shortcuts to program buttons

Your device may come with programs already assigned to hardware buttons. You can customize these buttons to open the programs you use most, or to perform certain shortcuts such as changing the screen orientation, opening the Today screen, or opening Input Panel.

1. Tap Start > Settings > Personal tab > Buttons.
2. A list of buttons and their current assignments are displayed on the Program Buttons tab.
3. Tap the button you want to reassign. To help you identify the buttons, there are numbers and icons representing the original function of the button.
4. In the Assign a program box, tap the program or shortcut you want to assign.
5. Tap OK.

To adjust the speed for scrolling

Pressing and holding NAVIGATION up or down (Up/Down control) scrolls through the items in a list. Follow these steps to set the scrolling speed.

1. Tap Start > Settings > Personal tab > Buttons > Up/Down Control tab.

2. Do one of the following:

3. Under Delay before first repeat, move the slider to shorten or lengthen the time that elapses before scrolling begins.

4. To change the time it takes to scroll from one item to the next, under Repeat rate, move the slider to adjust the speed.

Word completion options

Word completion helps you enter text faster by suggesting words as you enter letters using the on-screen keyboard or the handwriting recognition methods. You can set the number of suggested words to display, when to show the word list, and more.

1. Tap Start > Settings > Personal tab > Input > Word Completion tab.
2. Make sure the Suggest words when entering text check box is selected.
3. The suggested word list shows one word by default. You can change the number of words to display in the suggested list.
4. Tap OK.

Alarms and notifications

You can set up the correct date, time, and regional settings according to your use.

To set an alarm

1. Tap Start > Settings > System tab > Clock & Alarms > Alarms tab.
2. Tap and enter a name for the alarm.
3. Tap the day of the week for the alarm. You can select multiple days by tapping each desired day.

4. Tap the time to open a clock and set the time for the alarm.

5. Tap the alarm icon (💡) to specify the type of alarm you want. You can choose a flashing light, a single sound, a repeating sound, or vibration.

6. If you choose to play a sound, tap the list next to the Play sound check box and tap the sound you want.

To choose how to be notified about events or actions

1. Tap Start > Settings > Personal tab > Sounds & Notifications.

2. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes.

3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, or a flashing light.

Tip Turning off sounds and the flashing light helps conserve battery power.

Chapter 5

Synchronizing Information With Your Computer

5.1 About Synchronization

5.2 Setting Up Windows Mobile Device Center on Windows Vista®

5.3 Setting Up ActiveSync on Windows XP®

5.4 Synchronizing With Your Computer

5.5 Synchronizing via Infrared and Bluetooth

5.6 Synchronizing Music and Video

5.1 About Synchronization

You can take information from your computer wherever you go by synchronizing them to your device. The following types of information can be synchronized between your computer and your XV6800:

• Microsoft Outlook® information, which include Outlook e-mail, contacts, calendar, tasks, and notes
  • Media, such as pictures, music and video
• Favorites, which are the bookmarked links to your favorite web sites
• Files, such as documents and other files

Ways to synchronize

Before you can synchronize, you need to install and set up first the synchronization software on your computer. For more information, see "Setting Up Windows Mobile Device Center on Windows Vista®" and "Setting Up ActiveSync® on Windows XP®."

You can synchronize your XV6800 with your computer by using one of the following methods:

• Connect and synchronize using the supplied Mini USB cable.
  Upon connecting the sync cable to your device and your computer, the synchronization process starts automatically.
• Connect and synchronize using infrared.
  Use your device's infrared port to create a direct connection between the device and PC quickly. Align the infrared ports and start the connection from your device. For more information, see "Synchronizing via Infrared and Bluetooth" later in this chapter.
• Connect and synchronize using Bluetooth.

You must first set up a Bluetooth partnership between your device and your computer before you can synchronize information through Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 11. For information about synchronizing through Bluetooth, see "Synchronizing via Infrared and Bluetooth" later in this chapter.

Try to synchronize frequently in order to keep information up-to-date in both your device and your computer.

Note You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your device with the Exchange Server at your work. For more information about setting up your device to synchronize with the Exchange Server, see Chapter 8.

5.2 Setting Up Windows Mobile Device Center on Windows Vista®

Microsoft Windows Mobile ^® Device Center is the replacement for Microsoft ^® ActiveSync ^® on Windows Vista ^® .

Set up synchronization

When you connect your device to your PC and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your XV6800 device. Follow the steps below to create a partnership.

1. Connect your device to your PC. Windows Mobile Device Center configures itself and then opens.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Center's Home screen, click Set up your device.

Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not sync Outlook information.

1. Select the information types that you want to synchronize then click Next.

1. Enter a device name and click Set Up.

When you finish the setup wizard, Windows Mobile Device Center synchronizes your device automatically. Notice that Outlook e-mails and other information will appear on your device after synchronization.

Use Windows Mobile Device Center

To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer.

On Windows Mobile Device Center, you can do the following:

• Click Mobile Device Settings to view and change synchronization settings.
• When you click Pictures, Music and Video > _ new pictures/video clips are available for import, a wizard guides you to tag and transfer photos from your device to the Photo Gallery on your Windows Vista PC.
• Click Pictures, Music and Video > Add media to your device from Windows Media Player to synchronize music and video files using Windows Media™ Player. For more information, see "Using Windows Media Player Mobile" in Chapter 12.
• Click File Management > Browse the contents of your device to view documents and files from your device.

Windows Mobile Device Center

5.3 Setting Up ActiveSync on Windows XP®

The Getting Started Disc that comes with your XV6800 contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems.

Note For a list of compatible Windows systems, please go to: http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx.

Install ActiveSync

1. Insert the Getting Started Disc into the disc drive on your PC.
2. ActiveSync is available in English and several other languages. Select the desired language then click Next.
3. Click Setup and Installation.
4. Select the ActiveSync check box and click Install.
5. Read the license terms and click Accept.
6. When installation is complete, click Done.
7. On the Getting Started with Windows Mobile screen, click Close.

Set up synchronization

Follow the steps below to set up a synchronization partnership.

1. Connect your device to your PC. The Synchronization Setup Wizard automatically starts and guides you to create a synchronization partnership. Click Next to proceed.
2. To synchronize your device with your PC, clear the Synchronize directly with a server running Microsoft Exchange check box then click Next.
3. Select the information types that you want to synchronize then click Next.
4. Select or clear the Allow wireless data connections (such as MMS or Internet Calling) on your device while it is connected to your computer check box according to your preference.
5. Click Finish.

When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mails and other information will appear on your device after synchronization.

5.4 Synchronizing With Your Computer

Connect and synchronize your XV6800 with your PC using the USB cable, infrared or Bluetooth connection.

Start and stop synchronization

You can manually synchronize either from your device or PC.

From your XV6800 device

1. Tap Start > Programs > ActiveSync.
2. Tap Sync.
   To end synchronization before it completes, tap Stop.

Tip To delete a partnership with one PC completely, tap Menu > Options, tap the computer name, then tap Delete.

From Windows Mobile Device Center

1. Click Start > All Programs > Windows Mobile Device Center.

2. Click at the lower left of the Windows Mobile Device Center.

To end synchronization before it completes, click .

From ActiveSync on your PC

When you connect your device to your PC, ActiveSync automatically opens on your PC and synchronizes.

• To manually start synchronization, click
• To end synchronization before it completes, click ✗

Change which information is synchronized

You can change the information types and the amount of information to synchronize for each type either on your device or your PC. Follow the steps below to change synchronization settings on your device.

Note Before changing synchronization settings on your device, disconnect it from your PC.

1. In ActiveSync on your device, tap Menu > Options.
2. Select the check box for any items you want to synchronize. If you cannot select a check box, you might have to clear the check box for the same information type elsewhere in the list.
3. To change synchronization settings for an information type, for instance, E-mail, select it and tap Settings.

You can then set the download size limit, specify the time period of information to download, and more.

Notes • Some information types such as Favorites, Files and Media cannot be selected in ActiveSync Options on your device. You can only select or clear these items from your PC's Windows Mobile Device Center or ActiveSync.
- A PC can have sync partnerships with many different Windows Mobile powered devices, but a device can have sync partnerships with at most two PCs only. To ensure that your device will synchronize properly with both PCs, set up the second PC using the same synchronization settings you used on the first PC.

- Outlook e-mail can be synchronized with only one computer.

Sync connection problem

The desktop Microsoft ActiveSync 4.0 and later versions utilize a network type of connection with Windows Mobile powered devices, since this allows faster data transfer than a serial USB connection. When the PC is connected to the Internet or a local network, in some cases, the PC may disconnect the connection with your device in favor of the Internet or network connection.

If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable advanced network functionality check box. This makes your PC utilize a serial USB connection with your device.

The USB to PC (☐)icon appears on the Today Screen when serial USB connection is used.

5.5 Synchronizing via Infrared and Bluetooth

You can connect your XV6800 to the PC and synchronize wirelessly via infrared (IR) or Bluetooth.

To synchronize with a computer via infrared

1. Set up your computer to synchronize through infrared by following these steps:

For Windows Vista:

a. Open Windows Mobile Device Center on your PC.
b. Click Mobile Device Settings > Connection Settings.
c. Select the Allow connections to one of the following check box, then select Infrared Port (IR).

For Windows XP:

a. Open ActiveSync on your PC.
b. Click File > Connection Settings.
c. Select the Allow connections to one of the following check box, then select Infrared Port (IR).

1. Line up the infrared (IR) ports of your device and your computer so that they are unobstructed and within close range.
2. On your device, tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via IR.

To synchronize with a computer via Bluetooth

1. Set up Windows Mobile Device Center or ActiveSync on your PC to synchronize through Bluetooth. See the program's Help for instructions.
2. On your device, tap Start > Programs > ActiveSync.
3. Tap Menu > Connect via Bluetooth. Make sure the Bluetooth function of both your device and the computer are turned on, and they are within close range.
4. If this is the first time you have connected to this computer via Bluetooth, you must first complete the Bluetooth wizard on your device and set up a Bluetooth partnership between your device and the computer. For more information about creating a Bluetooth partnership, see "Bluetooth partnerships" in Chapter 11.

Notes • To preserve battery power, turn off Bluetooth when not in use.

- To connect and synchronize your device with a computer via Bluetooth, your computer must have a Bluetooth adapter or dongle.

5.6 Synchronizing Music and Video

If you want to carry your music or other digital media along with you while you travel, set up Microsoft Windows Media Player on your computer to synchronize music and video with your device.

Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media Player. Before media can be synchronized, you must do the following:

• Install Windows Media Player Version 11 on the PC. (Windows Media Player 11 works only in Windows XP or later versions).
• Connect your device to the PC with a USB cable. If your device is currently connected using Bluetooth or infrared, you must end that connection before media can be synchronized.
• Set up a sync partnership between your device and your PC's Windows Media Player.

For more information about Windows Media Player on your device, see "Using Windows Media Player" in Chapter 12.

Chapter 6

Organizing Contacts, Appointments, Tasks, and Other Information

6.1 Contacts

6.2 Calendar

6.3 Tasks

6.4 Notes

6.1 Contacts

Contacts is your address book and information storage for the people and businesses you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact.

From the contact list, you can quickly communicate with people. Tap a contact in the list for a summary of contact information. From there, you can call or send a message.

If you use Outlook on your PC, you can synchronize contacts between your device and PC.

To create a contact on your device

1. Tap Start > Contacts.
2. Tap New and enter the contact information.
3. In the File as field, choose how you want the contact name to appear in the contact list.
4. To add a photo of the contact, tap Select a picture, then select the picture file or tap Camera to take a photo of the contact. This photo appears on the Phone screen when you receive a call from the contact.
   5 To assign a ring tone to the contact, tap the Ring tone field, scroll through the list of tones, then select a desired tone.
5. When finished, tap OK.

Tips • If someone who is not in your list of contacts calls you, you can create a contact from Call History by tapping and holding a phone number and then tapping Save to Contacts from the shortcut menu.

- To save a phone number that is contained in a message, tap the phone number, then tap Menu > Save to Contacts.

- In the list of contact information, you'll see where you can add a picture or assign a ring tone to a contact.

- To save a phone number that is contained in a message, tap the phone number, then tap Menu > Save to Contacts. - In the list of contact information, you'll see where you can add a picture or assign a ring tone to a contact.

To change contact information

1. Tap Start > Contacts.
2. Tap the contact.
3. Tap Menu > Edit and enter the changes.
4. When finished, tap OK.

Organize and search

To group similar contacts

You can group similar contacts for easier management by assigning them to categories.

1. Create a new contact, or select an existing contact to edit.
2. Tap Categories.
3. Select a preset category such as Business or Personal, or tap New to create your own category.
4. When finished, tap OK.

Note If your contact list has been filtered by a category, that category is automatically assigned when you create a new contact.

To work with the contact list

There are several ways to use and customize the contact list. Here are a few tips:

1. Tap Start > Contacts.

1. In the contact list, do any of the following:

2. In Name view, you can search for a contact by entering a name or number, or by using the alphabetical index. To switch to Name view, tap Menu > View By > Name.

3. To see a summary of information about a contact, tap the contact. From there you can also make a call or send a message.
4. To see a list of available actions for a contact, tap and hold the contact.
5. To see a list of contacts employed by a specific company, tap Menu >View By >Company, then tap the company name.

To find a contact on your device

There are several ways to find a contact when your contact list is long.

1. Tap Start > Contacts.

2. If you are not in Name view, tap Menu > View By > Name.

3. Do one of the following:

4. Begin entering a name or phone number in the provided text box until the contact you want is displayed. To show all contacts again, tap the text box and clear the text, or tap the arrow to the right of the text box.

5. Use the alphabetical index displayed at the top of the contact list.
6. Filter the list by categories. In the contact list, tap Menu > Filter, then tap a category you've assigned to a contact. To show all contacts again, select All Contacts.

Share contact information

To beam a contact's details

You can quickly send contact information to another mobile phone or device through Bluetooth beaming.

1. Tap Start > Contacts, then select a contact.
2. Tap Menu > Send Contact > Beam.
3. Select a device where to beam the contact to.

To send contact information via text messaging

1. Tap Start > Contacts, then select a contact.
2. Tap Menu > Send Contact > Text Message.
3. Select the contact information you want to send, then tap Done.
4. In the new text message, enter the mobile phone number of the recipient, then tap Send.

To send contact information as a vcard

A vCard (virtual business card) is a standard file format used for exchanging contact information. vCard files can be exported to Outlook on the PC. From your device, you can send a vcard containing contact information as a file attachment in an MMS message.

1. Tap Start > Contacts, then select a contact.

2. Tap Menu > Send as vCard.

3. A new MMS message is created with the vcard file attached. Enter the mobile phone number or e-mail address of the recipient then tap Send.

6.2 Calendar

Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example.

You can look at your appointments in several different views (Day, Week, Month, Year, and Agenda). To see detailed appointment information in any view, tap the appointment.

To schedule an appointment

1. Tap Start > Calendar.
2. Tap Menu > New Appointment.

3. Enter a name for the appointment

4. Do one of the following:

5. If it is a special occasion such as a birthday or a whole-day event, set the All Day option to Yes.

6. If there is a time frame for the appointment, select the start and end dates and time.

7. Specify the type of category for your appointment, so that it can be grouped with other related appointments. Tap Categories, then select a preset category (Business, Holiday, Personal, or Seasonal), or tap New to create your own category.

8. When finished, tap OK to return to the calendar.

Notes • All-day events do not occupy blocks of time in Calendar; instead, they appear in banners at the top of the calendar.
- To cancel an appointment, tap the appointment and tap Menu > Delete Appointment.

Tip To have the time entered automatically in Day view, tap the time slot for the new appointment, and tap Menu > New Appointment.

View appointments

By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views.

• To see detailed appointment information in any view, tap the appointment.
  • To view appointments by category, tap Menu > Filter then select the desired category.
• To change the default view that Calendar uses to display appointments, tap Menu >Tools >Options >General tab. Tap the Start in box then choose the calendar view.
• When in Month view, you will see the following indicators:

Morning appointment

Afternoon or evening appointment

Both morning and afternoon/evening appointments

All-day event

Send appointments

To send a meeting request

Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile.

1. Tap Start > Calendar.
2. Schedule a new appointment, or open an existing one and tap Edit.
3. Tap Attendees.

Note You can specify if an attendee is required or optional only if your device is connected to a Microsoft Exchange 2007 server. Otherwise, all attendees are designated as required. For more information, see Chapter 8.

1. Tap the name of the contact you want to invite.
2. To invite each additional attendee, tap Add and tap the name.
3. Tap OK.
4. The meeting request will be sent to the attendees the next time you synchronize your device with your PC.

Tip To choose the e-mail account to use for sending meeting requests, tap Menu >Tools >Options >Appointments tab. Tap the Send meeting requests via box and choose to send via your Outlook E-mail or POP3/IMAP4 account.

Notes • If you're sending the meeting request using your Outlook E-mail account, it will be sent to the attendees the next time you synchronize your device with your PC or Exchange Server.

- When attendees accept your meeting request, the meeting is automatically added to their schedules. When their response is sent back to you, your calendar is updated as well.

To send appointment details as a vCalendar

A vCalendar is a standard file format used for exchanging scheduling and task information. vCalendar files can be exported to Outlook on the PC.

Tap Menu > Send as vCalendar to send a vCalendar containing appointment details as a file attachment in an MMS message. For more information about sending MMS messages, see "MMS Messages" in Chapter 7.

6.3 Tasks

Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories.

Your tasks are displayed in a task list. Overdue tasks are displayed in red.

To create and categorize a task

1. Tap Start > Programs > Tasks.
2. Tap Menu > New Task, enter a subject for your task, and fill in information such as start and due dates, priority, and so on.
3. Specify the type of category for your task, so that it can be grouped with other related tasks. Tap Categories, then select a preset category (Business, Holiday, Personal, or Seasonal), or tap New to create your own category.
4. When finished, tap OK.

Tip You can easily create a short, to-do type task. Simply tap the Tap here to add a new task box, enter a subject, and tap the Enter button on the on-screen keyboard. If the task entry box is not available, tap Menu > Options and select the Show Tasks entry bar check box.

To change the priority of a task

Before you can sort tasks by priority, you need to specify a priority level for each task.

1. Tap Start > Programs > Tasks.
2. Tap the task you want to change the priority for.
3. Tap Edit, and in the Priority box, tap a priority level.
4. Tap OK to return to the task list.

Note All new tasks are assigned a Normal priority by default.

To set a default reminder for all new tasks

You can have a reminder automatically turned on for all new tasks you create.

1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Set reminders for new items check box.
4. Tap OK to return to the task list.

Note The new tasks must have due dates set in order for the reminder to take effect.

To show start and due dates in the task list

1. Tap Start > Programs > Tasks.
2. Tap Menu > Options.
3. Select the Show start and due dates check box.
4. Tap OK.

To locate a task

When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task.

1. Tap Start > Programs > Tasks.
2. In the task list, do one of the following:
3. Sort the list. Tap Menu > Sort By, and tap a sort option.
4. Filter the list by category. Tap Menu > Filter, and tap the category you want displayed.

Tip To filter your tasks further, tap Menu > Filter > Active Tasks or Completed Tasks.

To send task information as a vCalendar

Tap Menu > Send as vCalendar to send a vCalendar containing task details as a file attachment in an MMS message. For more information about sending MMS messages, see "MMS Messages" in Chapter 7.

6.4 Notes

Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others.

Enter information in Notes

There are several ways to enter information in a note. You can enter typed text by using the on-screen keyboard or handwriting recognition software. You can use the stylus to write or draw directly on the screen.

To set the default input mode for Notes

If you frequently add drawings to your notes, you may find it helpful to set Writing as the default input mode. If you prefer typed text, select Typing.

1. Tap Start > Programs > Notes.
2. In the note list, tap Menu > Options.
3. In the Default mode box, tap one of the following:
4. Writing if you want to draw or enter handwritten text in a note.

5. Typing if you want to create a typed note.

6. Tap OK.

To create a note

1. Tap Start > Programs > Notes. In the note list, tap New.
2. Tap the Input Selector arrow next to the Input Method icon on the menu bar, tap the input method you want, and enter your text.
3. If the Input Selector arrow is not displayed, tap the Input Method icon.
4. When finished, tap OK to return to the note list.

Notes • To select handwritten text, tap and hold next to the writing. As soon as dots appear, and before they form a complete circle, quickly drag across the writing.

- If a letter crosses three ruled lines, it is treated as a drawing rather than text.

To draw in a note

1. Tap Start > Programs > Notes.
2. In the note list, tap New.
3. To draw on the screen, use the stylus like a pen.
4. A selection box appears around your drawing.
5. When finished, tap OK to return to the note list.

Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected.

Drawing on the screen

Record a voice note

You can create a stand-alone recording (voice note) or you can add a recording to a note.

To create a voice note

1. Tap Start > Programs > Notes.
2. Do one of the following:
3. To create a stand-alone recording, record from the note list.
4. To add a recording to a note, create or open a note.
5. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar.
6. Tap the Record icon ( ➤ to begin recording.
7. Hold your device's microphone near your mouth or other source of sound.
8. Tap the Stop icon ( ▼ when finished recording.
9. If you are adding a recording to a note, tap OK to return to the note list when finished.
10. If you are recording in an open note, an icon will appear in the note.
11. If you are creating a stand-alone recording, the recording will appear in the note list.

Tip To quickly create a recording, press and hold the VOICE COMMAND button, then you can begin to record after a beep sound. Release the button when you are finished.

To change recording formats

1. Tap Start > Settings > Personal tab > Input.
2. Tap the Options tab, and select the desired format you want in the Voice recording format list.
3. Tap OK.

Note You can also change recording formats from within Notes. In the note list, tap Menu > Options > Global Input Options link (at the bottom of the page), then tap the Options tab.

Chapter 7

Exchanging Messages

7.1 Messaging

7.2 Text Messages

7.3 MMS Messages

7.4 Setting Up E-mail Accounts

7.5 Using E-mail

7.1 Messaging

Messaging is where your text messages and your e-mail accounts are located. When you receive new messages, you can open them from the Today screen. Simply tap the type of message that you want to open.

To select a messaging account

• Tap Start > Messaging. The Account Picker screen then appears where you can select an account; or
• While you are in a message list of a certain account, for example Text Messages, tap Menu > Go To when you want to switch to other types of messaging accounts.

Account Picker screen

To configure message account settings

• Tap Menu > Options on the Account Picker screen; or
• Tap Menu > Tools > Options while you're in a message list.

7.2 Text Messages

Send short text messages up to 160 characters long to other mobile phones. For quicker and easier typing, use the sliding keyboard to enter your message.

Send text messages

To compose and send a message

1. Tap Start > Messaging.
2. On the Account Picker screen, tap SMS \ MMS.
3. Tap Menu > New > SMS.

4. Enter the mobile phone number of one or more recipients, separating them with a semicolon. To access phone numbers from Contacts, tap To.

5. Enter your message.

6. To quickly add common messages, tap Menu > My Text and tap a desired message.
   • To check the spelling, tap Menu > Spell Check.

6. Tap Send.

Tip To enter symbols, tap 123 using the on-screen keyboard. To access more symbols, use the Symbol Pad. See Chapter 2 for details.

To reply to or forward a text message

1. Select or open the message.
2. Tap Reply, or Menu > Reply All, or Menu > Forward.

To automatically resend text messages that failed delivery

If text messages were not successfully sent due to network problem or loss of signal coverage, they will be queued in the Text Messages Retry program and automatically resent. While text messages remain queued, you can choose to delete some or all of them by following these steps:

1. Tap Start > Programs > Text Messages Retry.

2. Do one of the following:

3. To delete a text message, select the message then tap Menu >Dismiss.

4. To delete all queued text messages, tap Menu > Dismiss All.

Manage text messages

Text messages that are sent to and received from a contact (or number) are grouped as a single thread in your inbox. Threaded SMS lets you see exchanged messages (similar to a chat program) with a contact on the screen.

To reply to a text message

1. In the SMS \ MMS Inbox, tap a message thread to open it.
2. At the bottom of the screen, type your reply message and then tap Send.

To delete a message in the thread

1. In the SMS \MMS inbox, tap a message thread to open it.
2. Select a message in the thread that you want to delete.
3. Tap Menu > Delete.

To delete all messages in a thread

1. In the SMS \ MMS inbox, select a message thread.
2. Tap Delete.

To reply to a text message with an MMS message

You can reply to a text message in a thread using an MMS message.

1. In the SMS \ MMS inbox, tap a message thread to open it.
2. Tap Menu > Insert, and then in the menu, select the item you want to insert: Video, Picture, Audio, vCard, vCalendar, or Attachment.
3. Tap Send.

7.3 MMS Messages

Creating and sharing multimedia messages (MMS) with your friends and family are easy with your device. You can attach pictures or video, and an audio clip in an MMS. You can even use the device camera to capture photos and video clips while composing a new MMS message, and send them along with your message.

To access MMS

1. Tap Start > Messaging.
2. On the Account Picker screen, tap SMS \ MMS.

MMS message folders

Notes • Please note that MMS is a charged service. In order to use MMS successfully, this has to be provisioned on your mobile account. Please contact Verizon Wireless to have this provisioned as part of your calling plan.
- Please ensure the size of your MMS message is within the allowed limits when sending to another mobile phone user or sending to an e-mail address.

Change MMS settings

When you send an MMS message, a notification (text message) will first be sent to the recipient, while your MMS message will be temporarily stored on an MMS server of your wireless service provider. When others send you an MMS message, similarly, the MMS message will be stored on the MMS server until you retrieve it. Hence, your device must be configured with the location of the MMS server for you to be able to send and receive MMS messages on your device.

When you purchase your XV6800, it is already preset with Verizon's MMS server settings. If you accidentally lost the preset settings or you changed to another wireless service provider, follow the steps below to configure MMS settings.

To configure MMS settings

1. Tap Start > Messaging > SMS \ MMS.
2. Tap Menu > MMS Configuration. The MMS Configuration screen appears.
3. In the Preferences tab, select or clear the provided check boxes according to your needs. You can choose to retrieve MMS messages immediately, accept or reject messages, request a delivery receipt, specify a resolution for images you send, and more.
4. Tap the Servers tab and check if your device is preset with MMS server settings.

If there are no preset settings, tap New and enter the following information, which you can get from your wireless service provider:

• Server name. A descriptive name, such as your wireless service provider name.
• Gateway. Location of the MMS server, which is usually in the form of an IP address.
- Port number. HTTP port number used for connecting to the MMS server and for file transfer.
• Server address. URL address of the MMS server.
- Connect via. Select the connection that your device uses for MMS.
- Sending size limitation. Select the maximum MMS message size allowed by your wireless service provider.
- WAP version. Select either WAP 1.2 or WAP 2.0, depending on which one is being used by your wireless service provider.

5. Tap OK.

The MMS server settings will then be added as an entry on the MMS Configuration screen.

Notes • If your device already has preset MMS settings, it is recommended that you do not change these settings. If you change the preset settings, your device may not be able to send and receive MMS messages.
- If you add several MMS service providers to the MMS Configuration screen, you can choose one as your default MMS provider. Select the MMS provider's name in the list then tap Set As Default.

Create and send MMS messages

After configuring the required settings, you can start to compose and send MMS messages.

To compose an MMS message

You can compose MMS messages in a combination of various slides, where each slide can consist of an image or video clip, audio, and/or text.

1. On the MMS screen, do one of the following:

2. Tap Menu > New > New Flix Message to create an MMS message containing video and text.

3. Tap Menu > New > New Pix Message to create an MMS message containing images, audio, and text.

4. In To, enter the recipient's phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts.

5. Enter a subject for your message.

6. Tap the Insert icon (☐) to select and insert a photo, GIF animation, or video clip. When selecting a photo or video clip, you can:

- Tap Select to insert the selected photo or video clip into the MMS message you are composing.

- Tap on to take a photo/record a video clip, and then insert it into the MMS message.

- Tap the Exit button ( ✗ ) to quit selection and return to the MMS message.

Tip To go to the other folder where you store the picture and video files, tap the Down arrow (▼) to navigate and select the other folder.

1. Enter text and insert audio clips by tapping the respective areas. See "To add text to an MMS message" and "To add an audio clip to an MMS message" for details.
2. To add more slides, tap ▶ or tap Menu >Slides >Insert Slide. Repeat steps 4 and 5 to insert photos/videos, text, and audio onto your slides.
3. Tap Send to send the MMS message.

Tip You can also send an MMS message directly from the Pictures & Videos or Camera program. Do one of the following:

• In Pictures & Videos, select a picture, GIF animation, or video, and tap Menu > Send. In Select an account, tap MMS if you're sending video, or tap New Pix Message (MMS) if you're a sending an image or GIF animation.
• Capture a photo or an MMS video clip using the camera, and tap the Send icon. In the Send File dialog box, tap Send via MMS.

To add text to an MMS message

When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text. You can insert the following types of information:

Tip To edit or delete a phrase on the Canned Text list, tap and hold a string, then tap Edit or Delete from the shortcut menu. To create and add a new phrase to the list, tap New.

To add an audio clip to an MMS message

You can add an audio clip to a pix message.

1. Tap Insert audio on your MMS message.

Tip By default, My Documents will be shown. Tap My Music or another folder that contains audio files. When navigating folders, tap the down arrow (▼ to return to the upper folder.

1. Select an audio file. When selected, you can:

2. Tap to play the audio clip, tap to pause, or tap to stop playback.

3. Tap Select to insert it into your MMS message.
4. Tap the Exit button (✗) to quit selection and return to the MMS message.

Tip To record a new audio clip and add it to your MMS message, tap 📄. The Record pop-up window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add. The new audio clip is then inserted into your MMS message.

To create an MMS message from a template

- While on an MMS message, tap Menu > Template > Select a Template to compose a message using a predefined template.

Note To save a message as a template, open the message and tap Menu > Template > Save as Template.

View and reply MMS messages

To view an MMS message

- Use the playback controls

• Tap Contents to see a list of files included in the message.

• On the Message Contents screen, you can do the following:

• To save a file, select it, and tap Menu > Save.
  • To save the contents of a text file to the My Text list, tap Menu > Save into My Text.
  • To associate a photo to one of your contacts, tap Menu > Assign to Contact.

To reply to an MMS message

- On the message list, select the MMS message and tap Menu > Reply > Reply to reply to the sender of the message.

To block a phone number from sending you MMS messages

If you do not want to receive MMS messages from a particular sender, you can add the sender's phone number to the MMS Blacklist.

1. When you receive a new MMS message, open and view the message.
2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail.

3. On the MMS Detail screen, tap Menu > Show Contact Details.

4. Tap Menu > Save to Blacklist.

5. Tap Done.

Tips • To view the MMS Blacklist, on the message list tap Menu > MMS Options > Blacklist tab.

- To unblock a phone number and allow the sender to send you MMS messages, remove the number from the Blacklist. Tap and hold the phone number in the Blacklist, then tap Delete.

7.4 Setting Up E-mail Accounts

Types of E-mail Accounts

Before you can send and receive e-mail, you need to set up your e-mail account on your device. You can set up the following types of e-mail accounts on your device:

• Outlook e-mail that you synchronize with your PC or your company's Exchange Server
  • E-mail account that you have from an Internet Service Provider (ISP)
  • Work account that you access using a VPN connection
• Other web-based e-mail accounts such as Gmail®, Yahoo!® Mail Plus, etc.

E-mail Setup Wizard

Windows Mobile's E-mail Setup Wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device. If the settings are not found on your device, Auto Setup then attempts to retrieve the settings online for which you may be charged when your device connects to the Internet and downloads them. If it cannot find the e-mail settings online, you need to enter them manually.

Note For more information about setting up your company Outlook e-mail account, see Chapter 8.

To set up a POP3 or IMAP4 e-mail account

Set up a POP3 or IMAP4 e-mail account on your device if you have an e-mail account from an Internet service provider (ISP) or other e-mail provider, or a web-based account such as Gmail, Yahoo! Mail Plus, etc. You can also add a work account that you access using a VPN server connection as a POP3/IMAP4 account.

1. Tap Start > Messaging > Setup E-mail.
2. Enter the E-mail address and Password for the e-mail account and select the Save password option. Tap Next.

3. If e-mail provider settings are found preconfigured on your device, the E-mail Setup Wizard shows a successful message. Tap Next.
   If the settings are not found on your device, select the Try to get e-mail settings automatically from the Internet check box to find and download e-mail server settings from the Internet and then tap Next.

4. Enter Your name and the Account display name and then tap Next.

Note If the E-mail Setup Wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See "To specify e-mail server settings" for details.

1. In the Automatic Send/Receive list, choose how frequent you want e-mail messages to be automatically sent and downloaded on your device.

Note Tap Review all download settings to select download options, set the e-mail format as HTML or plain text, and more. For more information, see "To customize download and format settings."

1. Tap Finish.

To specify e-mail server settings

If Auto Setup is unsuccessful, contact your ISP or e-mail provider for the Incoming mail server and Outgoing mail server settings so you can enter them on your device.

Other options that you can select include the following:

• Select the Outgoing server requires authentication check box, if required by your provider.
• If the outgoing e-mail server requires a different user name and password for sending e-mail, clear the Use the same user name and password for sending e-mail check box. You will be prompted to enter these information.
• Tap Advanced Server Settings, then select the Require SSL check boxes if your e-mail provider uses an SSL connection for more secured e-mail. From the Network connection list, select the data connection that you use for connecting to the Internet.

To customize download and format settings

Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap Review all download settings to choose download options, message format, and other settings.

Options Description
Automatic Send/Receive	You can select a time interval for connecting to the Internet automatically to send and receive messages.
Download messages	Set the number of days of messages that you want to be downloaded to your device.
Send/receive when I click Send	By default, messages are immediately delivered when you tap Send. If you prefer to save outgoing messages to the Outbox folder first, clear the check box. (In this case, you will need to manually send messages by tapping Menu > Send/Receive).
Use automatic send/receive schedule when roaming	This allows your device to data roam when there is a set time interval for connecting to the Internet automatically. Since this may result in higher connection costs, you may want to leave the check box cleared.
When deleting messages	Choose whether to delete messages from the mail server when you delete them on your device.
Message format Select HTML or Plain Text.
Message download limit	Select the e-mail download size. If you have large volumes of e-mail, use a lower size or select to download headers only.

Setting Up a Custom Domain E-mail Account

When you are using an e-mail domain name that is hosted by a different e-mail provider (for example, your e-mail address may be [e-mail] but E-mail.com hosts the e-mail account and provides e-mail services), you can clear the Try to get e-mail settings automatically from the Internet option and then select the Custom Domain option in the E-mail Setup Wizard to set up your e-mail account on your device.

7.5 Using E-mail

After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages.

Create and send messages

To compose and send a message

1. Tap Start > Messaging then select an e-mail account.
2. Tap Menu > New.
3. Enter the e-mail address of one or more recipients, separating them with a semicolon. To access addresses from Contacts, tap To.
4. Enter your message. To quickly add common messages, tap Menu > My Text and tap a desired message.
5. To check the spelling, tap Menu > Spell Check.
6. Tap Send.

Tips To enter symbols, tap 123 using the on-screen keyboard. To access more symbols, use the Symbol Pad. See Chapter 2 for details.

- To set the priority, tap Menu > Message Options.

- If you are working offline, e-mail messages are moved to the Outbox folder and will be sent the next time you connect.

To add an attachment to a message

1. In a new message, tap Menu > Insert and tap the item you want to attach: Picture, Voice Note, or File.
2. Select the file you want to attach, or record a voice note.

Filter the Inbox message list

When the Inbox on your device is full of messages, it may be hard to browse and locate a desired message. You can filter your Inbox to only display the messages that contain a particular sender or subject you are searching for.

To filter your Inbox

- Enter the sender name or e-mail subject you want to look for using the on-screen keyboard. As you tap keys, the message list narrows down to the conditions you have set.

For example, tapping "S", then "A" narrows the list to only the e-mails that contain sender names and e-mail subjects that start with "SA."

View and reply to messages

To read an incoming message

By default, only the first few kilobytes of a message are shown when you open an incoming message. To read the whole message, do one of the following:

• In the message list, select a message then tap Menu > Download Message; or
• Open a message. Scroll down to the end of the message then tap Get the rest of this message.

The message will be downloaded the next time you tap Menu > Send/Receive to send and receive e-mail.

Notes • If your company is running Microsoft Exchange Server 2007, the message downloads immediately, without waiting until the next time you synchronize. For more information about working with company e-mails, see Chapter 8.
- The size column in the message list displays the local size and server size of a message. Even when an entire message has been downloaded, these numbers may differ because the size of a message can vary between the server and the device.

To download an attachment

An attachment appears below the subject of the message. Tapping the attachment opens the attachment if it has been fully downloaded or marks it for download the next time you send and receive e-mail.

Notes • If there are multiple attachments in the message, all attachments are downloaded.

• For information about setting your device to automatically download file attachments, see "Customize e-mail settings."
• If your company is running Microsoft Exchange Server 2007, the attachment downloads immediately, without waiting until the next time you synchronize. For more information about working with company e-mails, see Chapter 8.

To reply to or forward a message

1. Open the message and tap Menu > Reply, Menu > Reply All, or Menu > Forward.
2. Enter your response. To quickly add common messages, tap Menu > My Text and tap a desired message.
3. To check the spelling, tap Menu > Spell Check.
4. Tap Send.

Tips • To see more header information, scroll up.

• To always include the original message, from the list view, tap Menu > Tools > Options > Message tab, and select the When replying to e-mail, include body check box.
• In the Outlook E-mail account, you will send less data if you do not edit the original message. This may reduce data transfer costs based on your rate plan.

To view and reply to HTML e-mails

You can receive, view and reply to HTML e-mails from any type of e-mail account. The HTML format is retained, without layout shifting or resizing.

Note HTML e-mail support in Outlook Mobile is available only if your company is using Microsoft Exchange Server 2007.

1. Set the message format to HTML. To find out how to set the message format, see "Customize e-mail settings."
2. Tap Start > Messaging, select your e-mail account, and open an HTML e-mail that you received.
3. Tap the Tap to scroll right option to be able to scroll sideways and get a complete horizontal view of the message.
4. Tap Get the rest of this message that's shown at the bottom of the message to download and view the whole message.
5. If thee-mail does not download immediately, tap Menu > Send/Receive.
6. If images do not immediately appear on the message, tap Internet pictures blocked then tap Download Internet pictures.
7. Tap Menu and choose whether to reply to the sender(s) or forward the message.
8. Enter your response then tap Send.

Tip E-mail can contain hyperlinks to web pages.

Synchronize E-mails

Synchronizing e-mails ensures that new e-mails are downloaded to the device Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the server are removed from your device. The manner in which you synchronize e-mails depends on the type of e-mail account you have.

To automatically synchronize an Outlook e-mail account

1. Connect your device to your computer through USB or Bluetooth. Otherwise, connect through a data connection if you are synchronizing Outlook e-mail with the Exchange Server.
2. Synchronization automatically begins, and your device sends and receives Outlook e-mail.

Tip You can also manually synchronize anytime by tapping Sync in ActiveSync or Menu > Send/Receive in Outlook Mobile.

To send and receive e-mail for a POP3/IMAP4 account

If you have an e-mail account with an ISP or a work account that you access using a VPN server connection, you send and receive messages through a remote e-mail server. Before sending and downloading messages, you need to connect to the Internet or your corporate network.

1. Tap Start > Messaging then select your POP3 or IMAP4 e-mail account.
2. Tap Menu > Send/Receive. Messages on your device and e-mail server are synchronized: new messages are downloaded to the device Inbox folder, messages in the Outbox folder are sent, and messages deleted from the server are removed from the device Inbox.

Customize e-mail settings

To change the download size and format, and manage e-mail attachments for Outlook e-mail

1. Disconnect your device from the computer.
2. Tap Start > Programs > ActiveSync.
3. Tap Menu > Options, select E-mail, then tap Settings.

4. On the E-mail Sync Options screen:

5. In Download size limit, select the desired e-mail size.
   • In Message format, select HTML or Plain text.

6. Select the Include file attachments option to automatically download attachments on Outlook e-mails.

Note Automatic downloading of message attachments for Outlook e-mail is available only if your company is using Microsoft Exchange Server 2007.

1. Close ActiveSync and reconnect your device to the computer.

To change the download size and format, and manage e-mail attachments for POP3/IMAP4 e-mail

1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you're in a message list.
2. Tap your POP3/IMAP4 e-mail account.

3. Tap Download Size Settings.

4. In Download size limit, select the desired e-mail size.
   • In Message format, select HTML or Plain text.

5. In Download attachments (IMAP4 e-mail account only), select the desired setting for downloading e-mail attachments.

6. Tap Done.

To store attachments on a storage card

1. Tap Start > Messaging.
2. Tap Menu > Tools > Options > Storage tab.
3. Select the Store attachments on storage card check box.

Chapter 8

Working With Company E-Mails and Meeting Appointments

8.1 Synchronizing Your Device with the Exchange Server
8.2 Working With Company E-mails 8.3 Managing Meeting Requests
8.4 Finding Contacts in the Company Directory

8.1 Synchronizing Your Device with the Exchange Server

To keep up-to-date with your company e-mails while you're out of the office, you can connect your XV6800 to the Internet wirelessly and synchronize it with your company's Exchange Server. You can also access your company address book anytime. Your company must have a mail server that is running Microsoft Exchange Server with Exchange ActiveSync.

Set up an Exchange Server connection

Before you can start to synchronize with or access information from the Exchange Server, you need to set up an Exchange Server connection on your XV6800. Get the following information from your network administrator and enter them on your device:

• Exchange Server name (must be the Outlook Web Access server name)
• Domain name
• User name and password that you use at work

If you have not synchronized your device with your PC, follow these steps to set up an Exchange Server connection.

1. Tap Start > Messaging > Setup E-mail:
2. Enter your e-mail address and password, select the Save password option, then tap Next.
3. Clear the Try to get e-mail settings automatically from the Internet check box, then tap Next.
4. Select Exchange server in the Your e-mail provider list, then tap Next.
5. Tap Next again.
6. In the next screen, select the Attempt to detect Exchange Server Settings automatically check box, then tap Next.
7. In the User Information screen, enter your Exchange Server credentials including your user name, password, and domain, then tap Next.

The E-mail Setup Wizard then connects to the Exchange Server and downloads the settings.

1. When prompted, enter the server address, then tap Next.

2. Select the items that you want to sync with the Exchange Server.

Notes • To change synchronization settings of an information item, for example, E-mail, select the item, then tap Settings.
- To change the rules for resolving synchronization conflicts, tap Menu > Advanced.

10. Tap Finish.

Note If you synchronized e-mails with your computer before, open ActiveSync on your device, then tap Menu > Add Server Source to set up an Exchange Server connection. When prompted to select information types for synchronization, you must first clear the E-mail check box under the Windows PC item before you can select E-mail under Exchange Server.

Tip To change Exchange Server settings, open ActiveSync then tap Menu > Configure Server.

Start synchronization

Before you start synchronizing with the Exchange Server, make sure Wi-Fi is enabled or your device has been set up with a data connection to the Internet. For more information about connections, see Chapter 11.

After you finish setting up an Exchange Server connection, your device automatically starts synchronization.

You can manually start synchronization anytime by tapping Sync in ActiveSync.

Note If you connect your device to your office computer via a USB, infrared or Bluetooth connection, you can use this connection to the PC to "pass through" to the network and download Outlook e-mails and other information to your device.

8.2 Working With Company E-mails

Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails.

Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Please check with your network administrator for the availability of these features.

Automatic synchronization through Direct Push

Direct Push technology (push e-mail feature) enables you to receive new e-mails on your device as soon as they arrive in your Inbox on the Exchange Server. With this feature, items such as contacts, calendar and tasks are also immediately updated onto your device when these items have been changed or new entries have been added on the Exchange Server. To make Direct Push work, you need to have a data connection on your device.

You need to perform a full synchronization between your device and the Exchange Server first before Direct Push can be enabled.

Requirement

The Direct Push feature works for your device only if your company is using Microsoft Exchange Server 2003 Service Pack 2 (SP2) with Exchange ActiveSync or higher version.

To enable Direct Push via Comm Manager

1. On the Today screen, tap the Comm Manager icon (💡).

2. On the Comm Manager screen, tap the Microsoft Direct Push button.

The button 📧 will turn to 📧, which indicates that you will receive e-mails as they arrive.

When the button is in the state, you need to manually retrieve your e-mails.

To enable Direct Push via ActiveSync

1. In ActiveSync on your device, tap Menu > Schedule.

2. Select As items arrive in the Peak times and Off-peak times boxes.

Note When both Wi-Fi and the data connection are active at the same time, the Direct Push feature will always opt for the data connection, for which you could be charged per Verizon's service plan.

Scheduled synchronization

If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook e-mail and information. Set how often to synchronize during Peak times (which usually refer to your working hours) when e-mail volume is high, as well as Off-peak times when e-mail volume is low.

1. In ActiveSync on your device, tap Menu > Schedule.
2. Select a shorter time interval in the Peak times box for you to be able to receive e-mails more frequently. (Peak times which usually refer to your working hours when e-mail volume is high).
3. Select a longer interval in the Off-peak times box.

Tip To set the days and hours that make up your peak and off-peak times, tap Adjust peak times to fit your schedule.

Instant download through Fetch Mail

The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save data cost.

Requirement Fetch Mail works for your device only if your company is using Microsoft Exchange Server 2007 or higher.

1. Tap Start > Messaging > Outlook E-mail.
2. Tap an e-mail message to open it.
3. By default, only the first few kilobytes of the message is shown. To download the whole e-mail, scroll to the bottom of the message then tap Get the rest of this message.
4. A "Downloading message" status appears. Wait for the remainder of the message body to be downloaded.

Tip For information about changing e-mail sync options such as the initial download size limit for e-mail, see "Customize e-mail settings" in Chapter 7.

Note When you receive an e-mail that contains a link to a document such as a PDF or Microsoft Office document located on SharePoint or an internal file server, you can tap the link to view the document on your device. You can view the document only if you have a Microsoft Outlook account that synchronizes with Microsoft Exchange Server 2007 or later. Exchange Server must also be set up to allow access to SharePoint document libraries or internal file servers.

Search for e-mails on the Exchange Server

You can access messages that are not available on your device by searching your Microsoft Exchange Server mailbox. The search results will be downloaded and displayed in a Search Results folder.

Requirement Your company must be using Microsoft Exchange Server 2007 or higher.

1. Tap Start > Messaging > Outlook E-mail.
2. Tap Menu > Tools > Search Server.
3. In the Look for text box, enter the search keyword.
4. Choose the date range of messages to search from.
5. From the Look in list, choose whether to search from your inbox or outbox only or to search all folders.
6. Tap Search.

Flag your messages

Flags serve as a reminder for you to follow-up on important issues or requests contained in the e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device.

Requirement

Flags are enabled only if e-mails are synchronized with Microsoft Exchange Server 2007 or higher. Flags are disabled or hidden if e-mails are synchronized with earlier versions of Microsoft Exchange Server.

To flag or unflag a message

1. Tap Start > Messaging > Outlook E-mail.
2. Select a message or open a message.
3. Tap Menu > Follow Up and select one of the following options:
4. Set Flag. Mark the message with a red flag to indicate that it needs follow up.
5. Complete Flag. Mark the message with a check mark to indicate that the issue or request in the e-mail is already completed.
6. Clear Flag. Remove the flag to unmark the message.

Note E-mail message reminders are displayed on your device if the messages are flagged with reminders and synchronized from the Exchange Server.

Out-of-office auto-reply

Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply message when you're not available.

To send out-of-office auto-reply messages

1. Tap Start > Messaging > Outlook E-mail.
2. Tap Menu > Tools > Out of Office.
3. From the I am currently list, select Out of the Office.
4. Enter your auto-reply message then tap Done.

View a document linked to an e-mail message

When you receive an e-mail that contains a link to a document such as a PDF or Microsoft Office document located on SharePoint or an internal file server, you can view the document on your device.

Requirement

You can view the document only if you have a Microsoft Outlook account that synchronizes with Microsoft Exchange Server 2007 or later. Exchange Server must also be set up to allow access to SharePoint document libraries or internal file servers.

1. On the Today screen, tap Start > Messaging.
2. Select an e-mail account, then open a message with a link to a SharePoint document.
3. Tap the link to open and view the document.

8.3 Managing Meeting Requests

When you schedule and send meeting requests from your device, you can invite attendees to your meeting and check their status to know about their availability.

When you receive a meeting request, you can reply by accepting or declining the request. The meeting request also clearly indicates whether or not there are conflicting or adjacent meetings.

Requirement

Your company must be using Microsoft Exchange Server 2007 or higher.

To reply to a meeting request

1. When you receive a meeting request e-mail, a notification will be displayed on the Today screen. Open the e-mail.
2. Tap Accept to reply and accept the meeting request, or tap Menu > Decline if you cannot attend the meeting.

Tips . Before responding, you can check your availability during the time of the requested meeting by tapping View your calendar.

- If the time of the meeting conflicts with your other appointments, a "Scheduling Conflict" status appears on top of the e-mail.

1. Choose whether or not to edit your response e-mail before sending then tap OK.

1. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device.

To view the list of meeting participants

1. Tap Start > Calendar.

1. Tap a meeting request that you previously sent, then tap Attendees. The list of required and optional attendees will be listed.

Notes • For information about creating a meeting request, see "To send a meeting request" in Chapter 6.
• If you select a meeting that you have organized, the list shows who has accepted or declined the meeting.
- To view an attendee's contact information, tap the attendee's name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information.

8.4 Finding Contacts in the Company Directory

In addition to having contacts on your device, you can access contact information from your company's Global Address List (GAL). GAL is the address book that contains all user, group, and distribution list e-mail addresses of your organization, and it is stored on the Exchange Server. By having direct online access to it from your device, it is quick and easy for you to plan a meeting and e-mail a meeting request immediately to anyone in your company.

Requirement

Access to the GAL is available only if your company is running Microsoft Exchange Server 2003

SP2 or higher, and you have completed your first synchronization with the Exchange Server.

1. Synchronize with Exchange Server if you have never done so.

2. Do any of the following:

• In Contacts, tap Menu > Company Directory.
- In a new e-mail message, tap the To box (or tap Menu > Add Recipient) then tap Company Directory.

- In a new meeting request using Calendar, tap Attendees and then tap Company Directory at the top of the list.

1. Enter the part or full contact name and tap Search. In the search results list, tap a contact to select it.

Notes • You can save a contact from the Company Directory to your device by selecting the contact then tapping Menu > Save to Contacts.
- You can search on the following information as long as that information is included in the Company Directory: First name, Last name, E-mail name, Display name, E-mail address, or Office location.

82 Working With Company E-mails

Chapter 9

Working With Documents and Files

9.1 Microsoft® Office Mobile

9.2 Adobe Reader LE

9.3 Copying and Managing Files

9.4 ZIP

9.1 Microsoft® Office Mobile

Microsoft® Office Mobile consists of the following applications:

• Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device.
• Microsoft® Office OneNote® Mobile lets you create notes with text, photos, and voice recordings for synchronization later with Microsoft® Office OneNote® 2007 on your computer.
• Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide show presentations in *.ppt and *.pps formats.
• Microsoft® Office Word Mobile lets you create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files.

To use Microsoft Office Mobile

1. Tap Start > Programs > Office Mobile.
2. Tap the Office Mobile application that you want to use.

Word Mobile and Excel Mobile do not fully support some features of Microsoft® Office Word and Microsoft® Office Excel®. To see a complete list of features that are not supported in Word Mobile and Excel Mobile, see Help on your device.

Tips By default, Word Mobile saves documents in *.docx format, while Excel Mobile saves workbooks in *.xlsx format. If you want to open these types of files on a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you need to download and install the File Format Converter in your computer. You can find this converter at http://www.microsoft.com/downloads/details.aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en.
- If you want Word Mobile to save documents in *.doc format, tap Menu > Tools > Options (or Menu > Options when no document is opened), then change the Default template to Word 97-2003 Document (.doc).
- If you want Excel Mobile to save workbooks in a format that is compatible with Microsoft Office 2000, Office XP, or Office 2003, tap Menu > Options (with no workbook opened), then change the Template for new workbook to Blank 97-2003 Workbook.

9.2 Adobe Reader LE

Adobe Reader LE allows you to open and view Portable Document Format (PDF) files. These files usually have a *.pdf file extension.

To open a PDF file on your device

1. Tap Start > Programs > Adobe Reader LE.
2. Tap Open.
3. Browse to a folder and tap the PDF file you want to view.

Note To open another PDF file, tap Menu > Open. Tap Browse, select the desired file, and tap Open. You can also open a PDF file from File Explorer.

To navigate through a PDF file

You can do any of the following:

• Tap the Up, Down, Right, and Left arrow keys on the horizontal and vertical scrollbars to move to the desired direction of the page.
• Press NAVIGATION up, down, right, and left to move up or down a page or scroll through the pages.

• Tap the space between the arrow keys and the scrollbar with your stylus to move one screen towards the desired position.

• Tap and drag the scrollbar tab to quickly scroll through pages and jump to a desired page number.

• Tap Tools > Go To and select an option to go to a specific page in a multi-page PDF file.

To enlarge or reduce the display size

1. Open a PDF file you want to view.
2. Tap Tools > Zoom.
3. Select In or Out to enlarge or reduce the display size. Otherwise, select Fit Screen or Fit Width.
4. Select To % to set an arbitrary zoom ratio.

To customize page view and orientation

1. Open a PDF file you want to view.
2. Tap Tools > View.
3. Select an option to suit your view.

To find text in a PDF file

1. Open a PDF file you want to view.
2. Tap Tools > Find > Text.
3. Enter the text to be searched.
4. Choose search parameters, such as Match case, Whole word, Backwards, and tap Find.

Note Adobe Reader LE offers you the following advance features.

• It displays a bookmark pane for the PDF files that contain bookmarks. Tap the bookmarks to go to a specific section/page within the file.
• It supports password-protected PDF files with up to 128-bit encryption. When you open a password-protected PDF file, you will be prompted to enter the password before the file can be opened.

To use the toolbar

You can also use the Adobe Reader LE toolbar to access the most commonly used functions. The following table lists the toolbar controls.

This Control Does This
	Fits the entire page to the screen
	Fits the page width to the screen
	Displays the first page
	Displays the previous page
	Displays the next page
	Displays the last page
	Displays the text search screen
	Zooms out
	Zooms in

9.3 Copying and Managing Files

You can copy files between your XV6800 and PC using Windows Mobile Device Center or ActiveSync, or copy files to a storage card that is inserted on your device. You can also efficiently manage your files and folders using File Explorer.

Copy files using Windows Mobile Device Center or ActiveSync

Using Windows Mobile Device Center or ActiveSync, you can copy files from your PC to your device and vice versa.

To copy a file between your device and the PC

1. Connect your device to the PC.
2. Click File Management > Browse the contents of your device in Windows Mobile Device Center or click Explore in ActiveSync on your PC. This opens the Mobile Device folder for your device.
3. To copy a file from your device to your PC:

a. In Windows Explorer on your PC, browse your device and navigate to the file that you want to copy.
b. Right-click the file, then click Copy.
c. Locate the destination folder on your PC. Right-click the folder, then click Paste.

1. To copy a file from your PC to your device:

a. On your PC, navigate to the folder that contains the file you want to copy.
b. Right-click the file, then click Copy.
c. Right-click the destination folder under Mobile Device, then click Paste.

Copying a file results in separate versions of a file on your device and PC. Because the files are not synchronized, changes made to one file will not affect the other. If you want to file changes to be automatically updated on your device and PC, you can synchronize files between your device and PC. For more information about synchronizing with a computer, see Chapter 5.

Use File Explorer

File Explorer lets you browse the contents of folders on your device. The root folder on the device is named My Device. My Device is similar to My Computer on the PC and contains the My Documents, Program Files, Temp, Storage Card, and Windows folders, among others.

To use File Explorer

1. Tap Start > Programs > File Explorer.
2. Tap a folder or file to open it.
3. To return to an upper level folder, tap the Down arrow (▼ and select the folder.
4. To delete, rename, or copy a file quickly, tap and hold the file then choose the desired operation from the shortcut menu. To select multiple files, tap and drag over the desired files.

Store files to a storage card

To copy files to a storage card

1. Make sure the storage card is properly inserted into your device.

2. Tap Start > Programs > File Explorer and navigate to the appropriate folder.

3. Tap and hold the file you want to copy, and tap Copy.

4. Tap the Down arrow ( ) then tap Storage Card from the list.
5. Tap Menu > Edit > Paste.

To automatically save files on a storage card

In the Word Mobile, Excel Mobile, and Notes programs, you may find it helpful to save all new documents, notes, and workbooks directly on a storage card.

1. From the program file list, tap Menu > Options.
2. With a storage card inserted in your device, in the Save to box, select the appropriate storage card to automatically save new files on the storage card.
3. Tap OK.

Note In the file or note list, a storage card symbol (☐) is displayed next to the names of files saved on a storage card.

9.4 ZIP

This feature allows you to save memory and increase the storage capacity of your device by compressing files in the conventional ZIP format. You can view and extract archive files received from various sources. You can also create new *.zip files on your device.

Start ZIP and Open .zip files

You can use ZIP to either archive files or open an existing archive file on your device. Each time you start ZIP on your device, it searches for files that have the .zip file extension, and displays these files on the Archive List screen.

To start ZIP on your device

- Tap Start > Programs > Zip.

To open a ZIP file and extract files

1. Open a file using any of the following:
2. Select a file and tap File > Open Archive.
3. Tap and hold a file and tap Open Archive.
4. Double-tap a file.

Note You cannot select multiple ZIP files.

1. The files contained in the zip file are then displayed. Select files by doing one of the following:

2. Tap to select a file.

3. To select several files, tap Menu > Action and make sure Multi-Select Mode is selected. Select files by tapping each file. (Tap a selected file to deselect it.)

4. To select all files, tap Menu > Action > Select All.

5. Tap Menu > Action > Extract.

6. Choose a folder in which files will be extracted to, then tap Extract.

To create a zip archive

1. Tap New or File > New Archive.

2. On the Save As screen, enter a zip file name and choose a folder in which to save the zip file. You can also choose whether the zip file will be saved on the device's main memory or a storage card.

3. Tap Save.

4. Tap Menu > Action > Add.
5. Double-tap the folder that contains the files you want to archive.

6. Select files by doing one of the following:

7. Tap to select a file.

8. To select several files, tap and hold on the screen, then select Multi-Select Mode. Select files by tapping each file. (Tap a selected file to deselect it.)
   • To select all files, tap and hold on the screen, then tap Select All.

9. Tap Add.

10. Tap Menu > File > Close Archive.

11. After closing the zip file, you can tap Find to search for all zip files and display them on the Archive List screen.

Chapter 10

Getting Connected

10.1 Comm Manager

10.2 Connecting to the Internet

10.3 Internet Explorer Mobile

10.4 Bluetooth

10.5 Using Your XV6800 As a Modem

(BroadbandAccess Connect)

10.1 Comm Manager

Comm Manager acts like a central switcher that lets you enable or disable phone features as well as manage your data connections easily.

To open Comm Manager

- Tap the Comm Manager icon ( ) on the Today screen.

Simply tap the corresponding button to enable or disable a feature.

1 Tap to toggle between enabling or disabling flight mode. For more information about flight mode, see "Turn the phone function on and off" in Chapter 3.
2 Tap to toggle between turning on or off Bluetooth. Tap Settings > Bluetooth to configure Bluetooth on your device. See "Using Bluetooth" for details.
3 Tap to disconnect active data connections. You cannot reconnect data connections in Comm Manager.
4 Tap to toggle between enabling or disabling the phone function. Tap Settings > Phone to customize phone settings.
5 Tap to toggle between automatically receiving (as items arrive) or manually retrieving Outlook e-mails. For more information, see "Schedule synchronization with Exchange Server" in Chapter 4.
6 Tap to toggle between turning on the phone's ringer or setting the phone to vibration/mute mode.
7 Tap to open ActiveSync so you can synchronize the device and computer. For more information about the configuration settings for ActiveSync, see Chapter 4.

10.2 Connecting to the Internet

You can use Wi-Fi or dial-up to connect your device to the Internet or your company network.

Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 100 meters. To access the Internet via Wi-Fi on your device, you need access to a wireless network or hotspot.

Note The availability and range of your device's Wi-Fi signal depends on the number, infrastructure, and other objects through which the signal passes.

To turn Wi-Fi on and off

At the lower left side of your device, slide the WLAN Switch upward to turn Wi-Fi on, downward to turn Wi-Fi off. The icons on the switch represent the following:

: (Vi)Fi is turned on.

: Wi-Fi is turned off.

To connect to a wireless network or hotspot

1. After Wi-Fi has been turned on, your device then scans for available wireless networks or hotspots in your area. The network names of the detected wireless networks will be displayed on a pop-up message window. Tap the desired wireless LAN, then tap OK.

1. On the next pop-up message window, tap The Internet if the wireless LAN connects your device to the Internet. Otherwise, tap Work if the wireless LAN connects your device to a private network.

1. If the wireless LAN is secured by a network key, enter this key, then tap Connect.

Next time you use your device to detect wireless networks, you will not see the pop-up message windows again, and you will not be prompted to enter the network key of the previously accessed wireless network (unless you perform a hard reset which will erase custom settings on your device).

Note Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a Wi-Fi network. It may be necessary to provide a username and password for certain closed wireless networks, however.

To save battery power while connected to a wireless network

1. Tap Start > Settings > Connections tab > Wireless LAN to open the Wireless LAN Settings screen.
2. On the Power Mode tab of the Wireless LAN Settings screen, move the Power Save Mode slider to a position that optimizes performance with the least power consumption.

For example, move the slider to the left (Best Performance) to have the optimal WLAN performance; move to the right (Best Battery) to obtain the maximum battery usage.

To check the wireless LAN status

You can check the current wireless connection status from the following three screens of your device:

• Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon (💡) will appear on the title bar. After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon (💡) appears on the title bar. The arrows in this icon will move back and forth while your device is scanning for a wireless LAN signal. Once your device successfully connects to a wireless LAN, the arrows stop moving.
• Wireless LAN screen - Main tab. Here, it shows the name of the wireless network that your device is currently connected to. The configuration and signal quality of the wireless network are also shown.
• Configure Wireless Networks screen. Tap Start > Settings > Connections tab > Wi-Fi > Wireless tab. This screen displays the wireless networks currently available.

Wireless LAN: Main tab Wi-Fi: Wireless tab

• To connect to a wireless network in the list, scroll to the name of the desired wireless network, then tap Connect.
• Tap a wireless network in the list to view or change its connection settings.
• You can also add new wireless networks, if available, by tapping Add New.

Dial-up

When you are not within the coverage of a wireless network or hotspot, use phone dial-up to connect your device to the Internet. Settings for connecting to Verizon's 1xRTT/EVDO network are already preconfigured on your device, and your device is ready to connect to the Internet. Please do not change these settings as this may cause your data connection to stop working.

To set up a new dial-up connection to your ISP

If you need to use another dial-up connection from an ISP (Internet Service Provider), you can manually add it to your device.

To establish a dial-up connection on your device, you need the same settings that you normally use when you dial up from your computer. This includes the ISP server phone number, your user name and password.

1. Tap Start > Settings > Connections tab > Connections.
2. Under Verizon Wireless, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the connection.
4. In the Select a modem list, select Cellular Line, then tap Next.
5. Enter the ISP server phone number, then tap Next.
6. Enter your user name, password, and any other information required by your ISP.
7. Tap Finish.

Notes • To view help information for any screen, tap the Help icon ( ? ).

- To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard.

Work network connections

A Virtual Private Network (VPN) connection allows you to access your company network through your device's Internet connection. Whereas a proxy connection lets you access the Internet using an existing connection to your corporate or WAP network.

To set up a connection to a private network

1. Obtain the following information from your network administrator:

2. Server phone number

3. User name and password

4. Domain (and other required settings, such as IP address)

5. Tap Start > Settings > Connections tab > Connections.

6. In My Work Network, follow the instructions for each type of connection.

7. Complete the connection wizard, then tap Finish.

Start a data connection

After a data connection has been set up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that requires an Internet connection. For example, when you start Internet Explorer Mobile to browse the Internet, your device connects automatically.

To manually start a data connection

If you have more than one data connections on your device, you can manually start a connection.

1. Tap Start > Settings > Connections tab > Connections.

2. Tap Manage existing connections.

3. Tap and hold the name of the desired connection, then tap Connect.

To disconnect a data connection

- Tap the Comm Manager icon ( ) on the Today screen, then tap the Data Connection button ( ).

10.3 Internet Explorer Mobile

Internet Explorer Mobile is a full-featured Internet browser, optimized for use on your device.

To start Internet Explorer Mobile

- Tap Start > Internet Explorer.

To set a Web site

- Enter the Web site address in the Address Bar, and then tap

Internet Explorer® Menu

While browsing the Web, tap Menu to choose from a list of options, such as saving Favorites, changing the viewing size, and more. You can also tap and hold on a Web page to choose options from the shortcut menu.

Tip For more information about using Internet Explorer® Mobile, please go to: http://www.microsoft.com/windowsmobile/help/pocketpc/browseinternet.mspx.

Tap Menu > Add to Favorites to save the current Web page in your Favorites folder.

Tap Menu > View > Zoom Level to select a zoom level.

Tap Menu > Tools and choose to send the current Web page link, view the page's properties, or set preferences.

To save an image from a Web page to your device, tap and hold the image then tap Save Image.

To navigating large-sized Web pages, tap Menu > Zoom Out. Use the NAVIGATION CONTROL to move the box to the area of the Web page you want to view, and then tap Zoom In or press ENTER.

10.4 Bluetooth

Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information within a distance of about 10 meters without requiring a physical connection. You can even beam information to a device in a different room, as long as it is within the Bluetooth signal coverage range.

Bluetooth can be used in the following ways:

• Beam information, such as files, appointments, tasks, and contact cards, between devices that have Bluetooth capabilities.
• Synchronize information between your device and computer via Bluetooth.
• Use a Bluetooth-enabled headset (or other Bluetooth-enabled hands-free device such as a car kit) with your device for hands-free phone conversations.
• Use a Bluetooth service. Once you connect to another device or computer using Bluetooth, you can locate and use any of the services available on that device.
• Create a connection between your device and another Bluetooth-enabled phone to use that phone as a modem.

Note Normally, you will need another phone as a modem only if your Pocket PC device has no integrated phone capability.

Bluetooth modes

Bluetooth on your device operates in three different modes:

• On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa.
• Off. Bluetooth is turned off. In this mode, you can neither send nor receive information using Bluetooth. You might want to turn Bluetooth off at times in order to conserve battery power, or in situations where using a wireless device is prohibited, such as on board an aircraft and in hospitals.
  • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device.

Note By default, Bluetooth is turned off. If you turn it on, then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on.

To turn Bluetooth on and make your device visible

1. On your device, tap Start > Settings > Connections tab > Bluetooth.
2. Select the Turn on Bluetooth and Make this device visible to other devices check boxes.
3. Tap OK.

Bluetooth partnerships

A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. Creating a partnership between two devices involves entering the same Bluetooth passcode on both devices.

Creating a partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a passcode again. Make sure that on the two devices, Bluetooth is turned on and in visible mode.

To create a Bluetooth partnership

1. On your device, tap Start > Settings > Connections tab > Bluetooth.
2. On the Devices tab, tap Add new device. Your device searches for other Bluetooth devices and displays them in the box.

3. Tap the desired device name in the box.

4. Tap Next.

5. Specify a passcode to establish a secure connection. The passcode can be 1 up to 16 characters.

6. Tap Next.

7. Wait for the paired device to accept the partnership. The receiving party needs to enter the same passcode that you specified.

8. The name of the paired device is then displayed. You may edit and enter a new name for that device.

9. Select the check boxes of services that you want to use from the paired device.

10. Tap Finish.

To accept a Bluetooth partnership

1. Ensure that Bluetooth is turned on and in visible mode.
2. Tap Yes when prompted to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters.
4. Tap Next.
5. Tap Finish. You can now exchange information with the paired device.

To rename a Bluetooth partnership

1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. On the shortcut menu, tap Edit.
4. Enter a new name for the partnership.
5. Tap Save.

To delete a Bluetooth partnership

1. Tap Start > Settings > Connections tab > Bluetooth.
2. Tap and hold the partnership on the Devices tab.
3. Tap Delete.

Connect a Bluetooth hands-free or stereo headset

For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a car kit with your device.

Your device also supports A2DP (Advanced Audio Distribution Profile) which is for stereo audio over Bluetooth. This means that you can use a Bluetooth stereo headset with your device for hands-free phone conversations as well as for listening to stereo music. Make sure that your stereo headset also supports A2DP.

Just like when connecting to any Bluetooth device, you also need to enter a passcode when connecting to a Bluetooth hands-free or stereo headset. The passcode is fixed and cannot be changed on a Bluetooth headset. Before you connect it to your device, check for the proper passcode in the manufacturer's documentation.

To connect a Bluetooth hands-free or stereo headset

1. Make sure that both your device and the Bluetooth headset are turned on and within close range, and that the headset is visible. Refer to the manufacturer's documentation to find out how to set the headset in visible mode.
2. Tap Start > Settings > Connections tab.
3. Tap Bluetooth > Devices tab > Add new device. Your device displays the names of other Bluetooth devices within range.
4. Tap the name of the Bluetooth headset, then tap Next. The device will automatically pair with the Bluetooth headset.

Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually.

Note If the Bluetooth headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above. Tap and hold the name of the Bluetooth headset and tap Set as Hands-free or tap Set as Wireless Stereo.

Beam information using Bluetooth

You can beam information, such as contacts, calendar items, and tasks, as well as files from your device to your computer or to another Bluetooth-enabled device.

Notes • If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer.

- Before beaming items to your computer, open Bluetooth Configuration or Bluetooth Settings in the Control Panel and check if there's an option for setting a location for saving beamed items.

To beam information from your device to a computer

1. Turn on Bluetooth on your device, and make your device visible. For information about this, see "To turn Bluetooth on and make your device visible".
2. Set Bluetooth on your computer to visible mode, create a Bluetooth partnership, then enable your computer to receive Bluetooth beams.

If your computer has Windows Vista or Windows XP SP2 and your computer's Bluetooth adapter is supported by your Windows version, do the following steps:

a. On your computer, open Bluetooth Devices from the Control Panel then click the Options tab.
b. For Windows Vista, select Allow Bluetooth devices to find this computer.

For Windows XP, select Turn discovery on and Allow Bluetooth devices to connect to this computer.

c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see "Bluetooth partnerships".
d. In the Options tab of Bluetooth Devices, select Show the Bluetooth icon in the notification area.

e. To enable your computer to receive Bluetooth beams, right-click the Bluetooth icon at the bottom-right of your computer screen and select Receive a File.
3. Now you are ready to beam. On your device, tap and hold an item to beam. The item can be an appointment in your calendar, a task, a contact card, or a file.
4. To beam a contact, tap Menu > Send Contact > Beam.
To beam other types of information, tap Menu >Beam [type of item].
5. Tap the device name to which you want to send the beam.
6. If you beamed an Outlook item and it is not automatically added to Outlook, select File > Import and Export in Outlook to import it.

To beam information to a Bluetooth-enabled device such as another Windows Mobile powered device, follow steps 1 to 5 in the above procedure.

Tips • The default folder on your computer where beamed items are stored may be C:\Documents and Settings\your_username\My Documents in Windows XP or C:\Users\your_username\My Documents in Windows Vista.
- For your device to receive Bluetooth and infrared beams, tap Start > Settings > Connections tab > Beam and make sure the Receive all incoming beams check box is selected.

Use another Bluetooth phone as a modem

You can use another phone that has Bluetooth as a modem for your device to browse the Internet or to transfer other information.

To do this, create a Bluetooth modem connection on your device and then send information to the phone by using Bluetooth. The phone relays the information over the mobile phone network and then sends back to your device any information that you had requested over the connection.

Once you create a modem connection to the Bluetooth phone, you can reuse it whenever you want to use the phone as a modem. Make sure that Bluetooth is turned on and visible mode is enabled on both your device and the phone, and that the two are within close range.

Note Normally, you will need another phone as a modem only if your Pocket PC device has no integrated phone capability.

To use a Bluetooth phone as a modem for your device

1. On your device, tap Start > Settings > Connections tab > Connections.
2. Tap Add a new modem connection.
3. Enter a name for the connection.
4. In the Select a modem list, tap Bluetooth.
5. Tap Next.
6. If the phone appears in the My Connections list, skip to step 11.
7. If the phone does not appear in the My Connections list, tap Add new device, and follow the remaining steps.
8. Select the phone from the list and tap Next.
9. Enter a passcode and tap Next.
10. Enter the same passcode on the phone and tap Finish.
11. In the My Connections list on your device, select the phone and tap Next.
12. Enter the phone number to dial for this connection and tap Next.
13. Enter the required logon information for this connection and tap Finish.

10.5 Using Your XV6800 As a Modem (BroadbandAccess Connect)

When you need Internet access on your notebook computer while traveling, you can use your XV6800 as a modem for your notebook. Install the VZAccess Manager software from the provided CD onto your notebook so you can use the NationalAccess or BroadbandAccess service from Verizon Wireless to connect your notebook to the Internet.

This section shows how to install VZAccess Manager and quickly set up your notebook computer for Internet access. You will also learn the basics on using VZAccess Manager, such as how to connect to the NationalAccess or BroadbandAccess service, use its text messaging feature, etc. For more in-depth information about this software, refer to the documentation on the CD.

Notes • Your data plan must include the NationalAccess or Broadband Access service. Contact Verizon Wireless or visit http://www.verizonwireless.com to get pricing information and subscribe to any of these services.
- The VZAccess Manager software on the provided CD has been customized for XV6800. Some features described in the documentation on the CD may not be supported.

Install VZAccess Manager

There are two items that you need to install to your notebook computer: XV6800's modem driver and VZAccess Manager software. Follow the steps below to complete the installation.

To install XV6800's modem driver

1. Insert the provided CD into the CD or DVD drive of your notebook computer.
2. Run Start.exe from the CD.
3. On the first window that opens, click Next.
4. The main installation window then appears. Click Install USB Driver.

1. On the Welcome screen, click Next. The installer then copies XV6800's modem driver to your computer.
2. Select Yes, I want to restart my computer now, click OK, and then click Finish.

After restarting your computer, run the installer again and install the VZAccess Manager software.

To install VZAccess Manager

1. Run Start.exe from the CD.
2. Click Next.
3. Click Install VZAccess Manager and follow the on-screen instructions to complete the installation.

Set Up Internet access

After installation is complete, the VZAccess Manager Setup Wizard automatically opens and walks you through the process of setting up your notebook computer for Internet access. Follow the steps below to complete the setup process.

1. Before you continue with the setup wizard, power on your XV6800 and connect it to your notebook computer using the supplied USB cable.
2. On your XV6800, tap Start > Programs > Modem Link, then tap Menu > Start.

1. On the Welcome screen of the VZAccess Manager Setup Wizard, click Next.
2. Select Detect WWAN device only then click Next.

Note If your computer has built-in Wi-Fi or has a Wi-Fi card installed, you can select the Detect both Wi-Fi and WWAN option. This allows you to use either your XV6800 or your computer's Wi-Fi adapter to connect your notebook to the Internet. For more information, refer to the VZAccess Manager documentation on the CD.

1. VZAccess Manager will now detect and set up your XV6800. Click Next.
2. Select Data Cable and click Next.

1. Select Data Cable and click Next.
2. Before proceeding, make sure your XV6800's modem driver is already installed on your computer. See "To install XV6800's modem driver" for details.

If the driver has already been installed, click Next to continue.

1. A message then appears, indicating that your XV6800 has been detected. Click Yes.

1. Your XV6800 is generally recognized as HTC USB Modem by VZAccess Manager. Click Next to proceed.

1. The mobile phone number that you use on your XV6800 is automatically recognized and then displayed on the next screen. Click Next.

1. You can set VZAccess Manager to automatically run whenever you start up your computer by selecting the Run VZAccess Manager at Startup check box.
2. Click Finish.

Use VZAccess Manager to connect your notebook to the Internet

After you finished setting up VZAccess Manager on your notebook, the software automatically launches. You can also manually launch VZAccess Manager whenever you want to access the Internet on your notebook.

To manually launch VZAccess Manager

1. Connect XV6800 to your notebook's USB port.

2. On your XV6800, tap Start > Programs > Modem Link, then tap Menu > Start.

3. On your notebook, double-click the VZAccess Manager icon on the Windows Desktop or click Start > Programs > VZAccess Manager.

To connect to NationalAccess or BroadbandAccess

VZAccess Manager opens in Networks view, which lists all currently available network connections and indicates their respective signal strengths. Connect to the NationalAccess or BroadbandAccess service of Verizon Wireless so you can access the Internet on your notebook.

1. Double-click NationalAccess - BroadbandAccess
2. Click Continue to connect.

Once your notebook is successfully connected to the Internet, you will see a "Connected" status at the bottom left-hand side of VZAccess Manager's status bar. You can now surf the web and use e-mail on your notebook.

To disconnect the Internet connection

1. Click Disconnect on VZAccess Manager.
2. On Modem Link of your XV6800, tap Menu > Stop.

Overview of the user interface

One cool feature of VZAccess Manager is that it allows you to view, send and receive SMS text messages directly on the user interface. From VZAccess Manager, you can also launch Internet Explorer, open Outlook E-mail if it is your notebook's default e-mail software, and add shortcuts of your favorite applications.

Text messaging

Click on VZAccess Manager to use its text messaging feature. VZAccess Manager then downloads SMS text messages from your XV6800 and lists them in the TXT Messaging view. You can manage your text messages right on this screen, such as check and read incoming text messages, reply, forward, etc.

Note Text messages are synchronized between your XV6800 and VZAccess Manager.

Chapter 11

Experiencing Multimedia

11.1 Using Camera

11.2 Using Pictures & Videos

11.3 Using Windows Media Player

11.1 Using Camera

Taking photos and capturing video clips along with audio is easy with the built-in camera on your device.

To open the Camera screen

- Press and hold the CAMERA button on your device; or

• Tap Start > Programs > Camera; or
• Tap Start > Programs > Pictures & Videos > Camera icon.

To exit the Camera

- Tap the Exit icon ( ✗)

Capture modes

The Camera program on your device allows you to capture pictures and video clips by using various built-in modes with flexibility. The Camera is set to the Photo capture mode by default. The upper left corner of the screen displays the active capture mode.

To change the capture mode

• Tap or on the screen.
• Press NAVIGATION left or right.

The available capture modes are as follows:

• Photo: Captures standard still images.
• Video: Captures video clips, with or without accompanying audio.
• MMS Video: Captures video clips suitable for sending via MMS.
- Contacts Picture: Captures a still image and gives you the option to immediately assign it as a Photo ID for a contact.
• Picture Theme: Captures still images and places them within frames.
- Panorama: Captures a sequence of still images continuously in one direction, and allows stitching of all the images to create a panoramic view of a scenery

• Sports: Captures a sequence of still images (3, 5, 7, or 10) automatically.
- Burst: Captures a sequence of still images (maximum 30) as long as the CAMERA button on the device or the ENTER button on the NAVIGATION is kept pressed.

File formats supported

Using the available capture modes, the camera in your device captures files in the following formats:

Capture type Format
Still image JPEG
Video MPEG-4 (.mp4)
	Motion JPEG (.avi)
	H.263 (.3gp)
	3GP2 (.3g2)
MMS Video MPEG-4 (.mp4)
	H.263 (.3gp)
	3GPP2 (.3g2)
Panorama / Sports / Burst	JPEG

Camera controls

The CAMERA button, ENTER button, and Jog Wheel can all be used as the shutter release.

• Press to take a photo, or to take shots for a picture theme or panorama.
• Press to start recording video; press again to stop recording.
• To take consecutive shots in Sports mode, press shortly, then move your device to follow the movement of your subject.
• Press and hold when taking consecutive shots in Burst mode.

Press NAVIGATION up or down to increase or decrease the zoom level. See "Zooming" in this chapter for more details.

On-screen controls and indicators

1 Mode Switching control. Tapping the left/right arrow (☐/☐) on the screen allows you to switch the capture mode.
2 Resolution. The resolution icon (☐/☐/☐/☐/☐) indicates the current resolution. Tap to toggle among the different resolutions.

3 Storage. Tap to toggle between saving captured photos or video clips on the device memory (☐) or on the memory card (☐).

4 Remaining information indicator. In Photo, Contacts Picture, Picture Theme, Panorama, Sports, and Burst modes, this shows the remaining, available shots of pictures based on current settings. In Video and MMS Video modes, this shows the remaining duration that can be recorded. While recording video, this shows the recorded duration.

5 Zoom control. Tapping the up/down arrow (☐/☐) or tapping ☐/☐ on the screen allows you to zoom in or zoom out.

6 Camera Settings. Tap the Tool icon (Y) to open the Camera Settings screen.

7 Viewer. Tap the Viewer icon (☐) to open the Pictures & Videos screen.

8 Brightness. Tapping the minus/plus icon (− / +) decreases or increases the brightness level.

9 Metering Mode. Tap to toggle the metering mode between Center Area (☐) and Average (☐).

10 Flash Light. Tap to turn on or off the flash light that is located at the back of your device. Turn on the flash light when taking shots in dark-lit environments.

11 White Balance. Tap to toggle among the different white balance settings: Auto ( ), Daylight ( ), Night ( ), and Fluorescent ( ).

12 Self-timer. Tap to set the Self-timer to 2 seconds, 10 seconds, or off when in the Photo or Contacts Picture mode. When you press the ENTER button or the CAMERA button to capture a still image, it starts to count down, and then captures a still image after the assigned time (2 seconds or 10 seconds).

Two puppies sitting in petty chairs, one with a white collar and the other with a gray collar, captured in a video editing interface (no readable text or symbols on the animals themselves)

Video mode

13 Recording indicator. This shows a red, blinking indicator while video recording is in progress.

Picture Theme mode

14 Progress indicator. In Picture Theme, Panorama, Sports, and Burst modes, this shows the total number of consecutive shots.

15 Template Selector icon. In Picture Theme mode, tap 📄 to toggle among the different templates.

16 Stop. The Stop icon ( ) appears only in Panorama mode. Tap this icon if you want to stop capturing the remaining shots and start composing the panorama.

17 Exit. Tap the Exit icon (✗) to exit the Camera program.

Zooming

Before capturing a still image or a video clip, you can zoom in to make the object in focus move closer or zoom out to make the object move farther away.

To zoom in

• Press NAVIGATION up on your device; or
• Tap the triangular Up arrow above the Zoom Ratio indicator.

When the zooming limit is reached, you will hear a beep.

To zoom out

• Press NAVIGATION down; or
• Tap the Down arrow below the Zoom Ratio indicator.

The camera zoom range for a picture or a video clip depends on the capture mode and capture size. The following is a summary.

Capture mode Capture size setting Zoom range
Photo 2M (1600 x 1200) No zooming available
	1M (1280 x 960) 1.0x to 2.0x
	Large (640 x 480) 1.0x to 2.0x
	Medium (320 x 240) 1.0x to 4.0x
	Small (160 x 120) 1.0x to 8.0x
Video Medium (176 x 144) 1.0x to 2.0x
	Small (128 x 96) 1.0x to 2.0x
MMS Video	Medium (176 x 144) 1.0x to 2.0x
	Small (128 x 96) 1.0x to 2.0x
Contacts Picture	Large (480 x 640) 1.0x to 2.0x
	Medium (240 x 320) 1.0x to 4.0x
	Small (120 x 160) 1.0x to 4.0x
Picture Theme Determined by the current template	Depends on the size of the template currently loaded
Panorama Large (640 x 480) 1.0x to 2.0xMedium (320 x 240) 1.0x to 4.0xSmall (160 x 120) 1.0x to 8.0x
Sports Large (640 x 480) 1.0x to 2.0xMedium (320 x 240) 1.0x to 4.0xSmall (160 x 120) 1.0x to 8.0x
Burst Large (640 x 480) 1.0x to 2.0xMedium (320 x 240) 1.0x to 4.0xSmall (160 x 120) 1.0x to 8.0x

The Review screen

After taking a still image or recording a video clip, you can view the image or video clip on the Review screen. You can also tap the following icons at the bottom of the Review screen:

Scenic view of a powerful waterfall with mist rising, surrounded by rocky cliffs (no visible text or symbols)

Close-up portrait of a smiling woman with blonde hair, wearing a patterned jacket (no visible text or symbols)

Aerial view of a boat with a colorful parachute flying over water, city skyline in background (no visible text or symbols)

Contacts Picture modePhoto, Video, MMS Sports, BirdUberst modes

Theme, and Panorama modes

Icon Function

Back Go back to the live Camera screen.
Delete	Remove the captured image or video.
Send	Send via e-mail or MMS.
View	View the image in the Pictures & Videos program, or play the captured video in Windows Media Player.
Assign to Contacts	Associate the photo to a selected contact.
Browse	After you have taken photos in Sports or Burst mode, the total number of consecutive shots is shown in the lower right corner of the Review screen. Tap the up/down arrow to browse through the sequence of photos.

To change the display duration of the Review screen

1. Tap 🎨 to open the Camera Settings screen.
2. On the Camera Settings screen, tap Y. The Advanced menu then appears.
3. Tap Review Duration, then tap the desired time length for displaying captures on the Review screen.

Camera settings

Tap the Tool icon ( ¥ ) to access the Camera Settings screen. The Camera Settings screen allows you to configure the capture settings.

Camera Settings screen in Photo mode

When you tap the icons at the bottom of the Camera Settings screen, different menus will appear. Some menus and options may be available only in certain capture modes.

You can either tap on-screen or press the Navigation Control to navigate the Camera Settings screen.

Self-timer menu

- Self-timer. Select the Self-timer option for capturing images: Off, 2 seconds, or 10 seconds. Selecting 2 seconds or 10 seconds delays the capturing by the specified time after you press the CAMERA button, the ENTER button, or Jog Wheel.

Template menu

- Template. Select a template (in Picture Theme mode only).

Panorama Settings menu

• Direction. Choose in what direction images will be stitched in a panorama.
- Stitch Count. Select the desired number of snapshots to be taken and stitched into a panorama.
- Auto Stitch. When the Auto Stitch is On, the camera automatically stitches snapshots into one single file. If Auto Stitch is Off, the snapshots are saved as separate files.

Sports Settings menu

- Snapshots. Select the number of consecutive shots to capture (in Sports mode).

Flash Light menu

- Flash Light. Set this option to On to turn on the flash light (located at the back of your device) so that you can shoot photos or video clips in a low-light environment. The flash flight is available for use in all capture modes except in Sports and Burst modes.

Ambience menu

• White Balance. Select a white balance setting type such as Fluorescent, Night, etc. to suit your lighting environment.
  • Effect. Choose a special effect such as Greyscale, Sepia, etc., to apply to your photos or video clips.

Capture Settings menu

- Resolution. Select the desired image or video size.

- Quality. Select the JPEG image quality level for all captured still images. You can choose from Basic, Normal, Fine, and Super Fine.

- Metering Mode. Select a metering mode to allow the camera to measure the amount of light in the center and around the image and calculate the best-fit exposure value before capturing. Choose either Center Area to measure light using the center area of the image or Average to measure light using the area all around the image.

- Storage. Select where you want to save your files. You can either save the files to the main memory or to a storage card.

Capture Mode menu

- Mode. Switch between different capture modes such as Photo, Video, Contacts Picture, and more. For more information about these modes, see "Capture modes" earlier in this chapter.

Advanced menu

Tap the left/right icon in this bar to switch between the menu pages in the Advanced menu.

• Capture Format. Select the desired file format.

- Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the CAMERA button, the ENTER button, or Jog Wheel to take photos or record video clips.

- Grid (Photo mode only). Choose whether or not to show a grid on the Camera screen. Showing a grid helps you frame and center your subject more easily and accurately.

- Keep Backlight. Choose whether to turn the backlight on or off while using the camera. This overrides your device backlight settings while you are using the camera.

- Review Duration. Set a time length for displaying the captured image/video on the Review screen before automatically saving it and returning to the live Camera screen. Select No Limit if you do not want to impose a time limit. Select No Review to immediately return to the live Camera screen after capturing.

• Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by inconsistencies between the vertical scan rate of the camera display and the flicker frequency of fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to the proper frequency (50Hz or 60Hz) of the country where your device is being used.
• Record with Audio. Select On to record audio with the captured video clips. This is selected by default. If you select Off and then capture a video clip, it will have no audio.
• Prefix. Specify how to name captured images and video clips. When Default is selected, the file name of each new captured file is set to "IMAGE" or "VIDEO" followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the prefix.
• Counter. By default, the newly captured image or video files are named with a prefix and some sequential numbers, such as 001, 002, and so on. To reset the numbering to "001" for your captured files, tap Reset.
• Recording Limit. Specify the maximum time or file size for recording.
• Template Folder (in Picture Theme mode only). By default, templates are stored in the \My Documents\ Templates folder on the device's Main Memory. If you transferred some templates to a storage card (via File Explorer), set this option to Main + Card to specify that templates are located in both the main memory and the storage card.
• Adjust. This option allows you to adjust the camera display properties, such as Contrast, Saturation, Hue, and Sharpness.

1 In the submenu, tap one of the properties to adjust.
Alternatively, press NAVIGATION up or down to select a property.
2 To increase/decrease the value, tap the plus/minus icon or press NAVIGATION left or right. The live Camera screen on the background immediately displays the effect of changes.
3 Tap to save the settings and close the submenu.
4 Tap to reset all properties to their default.
5 Tap to close the submenu without applying and saving the changes.

11.2 Using Pictures & Videos

The Pictures & Videos program collects, organizes, and sorts images and video clips in the following formats on your device.

File Type File Extensions

Image *.bmp, *.jpg, *.gif

GIF animation *.gif

Video *.avi, *.wmv, *.mp4, *.3gp. *.3g2

You can view the pictures as a slide show, beam them, send them via e-mail, edit them, or set them as the background on the Today screen.

To open Pictures & Videos

- Tap Start > Programs > Pictures & Videos.

To copy media files to your device

• Copy pictures and GIF animation files from your PC or a storage card to the My Pictures folder on your device.
  • Copy video files to the My Videos folder.

For information about copying files, see "Copying and Managing Files" in Chapter 9.

To view pictures

1. The images in the My Pictures folder appear as thumbnails by default.
2. Select an image and tap View.

If you cannot find the desired image in the default My Pictures folder, go to another folder by tapping the Down arrow (▼)

To play GIF animation files

1. Select a GIF animation file and tap View.
2. The GIF Animation program then opens and plays the animation.

To play videos with audio

1. By default, the contents of the My Pictures folder will be shown.
2. To find the video clips that you captured, tap the down arrow (▼) next to the My Pictures folder and tap My Documents. Next, tap My Videos. Video clips are displayed as thumbnails by default, which appear with a media icon (💡)
3. Tap to select a video and play it in Windows Media Player.

To view slide shows

You can view your pictures as a slide show on your device. Pictures are shown in full-screen view with 5-second intervals between slides.

- Tap Menu > Play Slide Show.

Note You can specify how pictures are scaled to optimize their display in a slide show. Tap Menu > Options, then tap Portrait pictures or Landscape pictures on the Slide Show tab.

Tap anywhere on the screen to display the Slide Show toolbar, which you can use to stop or pause the slide show, rotate the view, and more.

To sort pictures and video clips

- On the Pictures & Videos screen, tap the sort list (labeled Date by default), and select the item you want to sort by (Name, Date, or Size).

To delete a picture or video clip

Do any of the following to remove a picture or a video clip:

• Select a picture or video clip on the Pictures & Videos screen, and tap Menu > Delete.
• Tap and hold the thumbnail of the picture you want to delete, then tap Delete.

Tap Yes to confirm the deletion.

To edit a picture

You can rotate, crop, and adjust the brightness and color contrast of your pictures.

1. In Pictures & Videos, tap the picture you want to edit.
2. Tap Menu > Edit, and do any of the following:

• To rotate a picture 90 degrees clockwise, tap Rotate.
- To crop a picture, tap Menu > Crop. Next, tap and drag to select the area to crop. Tap inside the box to crop, or tap outside the box to cancel cropping.
• To adjust the brightness and contrast levels of a picture, tap Menu > Auto Correct.

Note To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved.

To set a picture as the Today screen background

1. In Pictures & Videos, select the picture you want to set as the background.
2. Tap Menu > Set as Today Background.
3. In Transparency level, select a higher percentage for a more transparent picture, or a lower percentage for a more opaque picture.
4. Tap OK.

To send pictures and video clips via e-mail

1. First, set up Messaging to send and receive messages.
2. In Pictures & Videos, select the item you want to send.
3. Tap Menu > Send, and select one account (such as Outlook E-mail or MMS) to send the attached item.
4. A new message is created with the item attached.
5. Enter the recipient name and subject, and tap Send. The message will be sent the next time you synchronize your device.

Notes • Pictures and video clips are saved automatically before they are sent.

- Tap Menu >Beam to beam a selected media file using infrared or Bluetooth.

To assign pictures to contacts

You can assign a picture to a contact so that you can easily identify the contact at any point of time.

1. In Pictures & Videos, select the picture you want to assign to a contact.
2. Tap Menu > Save to Contact.
3. Tap the contact, or navigate and tap Select to choose the contact from your Contacts list.

To customize more image settings

1. In Pictures & Videos, select the picture for which you want to configure further settings.

2. Tap Menu > Options. The Options screen appears, allowing you to:

3. Resize a picture so that it can be sent faster through e-mail.

4. Set the direction of rotation for the Rotate function.
5. Configure the view settings during slide shows and activate screensaver options.

11.3 Using Windows Media Player

You can use Microsoft Windows Media Player 10 Mobile to play digital audio and video files that are stored on your device or on a network, such as on a Web site. The following file formats are supported by Windows Media Player Mobile:

Video File Formats Supported File Extensions

• Windows Media Video	.wmv, .asf
• MPEG4 Simple Profile	.mp4
• H.263	.3gp
• Motion JPEG	.avi
• 3GPP2	.3g2

Audio File Formats Supported File Extensions

• Windows Media Audio	.wma
• MP3	.mp3
• MIDI	.mid, .midi, .rmi
• AMR Narrow Band	.amr
• AMR Wide Band	.awb
• AAC	.m4a
• 3GPP2	.gcp

To open Windows Media Player Mobile

- Tap Start > Programs > Windows Media.

About the controls

About the screens and menus

Windows Media Player Mobile has three primary screens:

• Playback screen. The default screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window. You can change the appearance of this screen by choosing a different skin.
• Now Playing screen. The screen that displays the Now Playing playlist. This special playlist indicates the current file being played and any files that are "queued up" to play next.
• Library screen. The screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Videos, My TV, and My Playlists.

At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending upon which screen you are viewing. For more information about the commands in these menus, see Help on your device.

About licenses and protected files

Some media files have associated licenses that protect them from being unlawfully distributed or shared.

If you want to copy a protected file from your PC to your device, use the Windows Media Player on your PC to synchronize the file to your device. This will ensure that the license is copied along with the protected file.

Note You can view the protection status for a file by checking its file properties (tapping Menu > Properties).

Synchronize video and audio files

Use the latest version of Microsoft Windows Media Player on your PC to synchronize digital media files from your PC to your device. This ensures that protected files and album art (for skins) are copied to your device correctly.

To synchronize content to your device automatically

1. On your PC, start Windows Media Player and then connect your device to your PC.
2. In the Device Setup Wizard, type a name for your device and click Finish.
3. On the leftmost pane, right-click your device and select Set Up Sync.

Note You can also sync your storage card if you have one installed on your device. To sync, right-click Storage Card.

1. On the Device Setup dialog box, select Sync this device automatically and then select the playlist(s) that you want to sync between your PC and device.
2. Click Finish.

The files begin synchronizing to your device. The next time you connect your device to your PC while Windows Media Player is running, synchronization will start automatically.

To synchronize content manually to your device

1. If you have not set up synchronization between your device and PC, follow steps 1 to 3 in "To synchronize content to your device automatically".
2. Click the Sync tab on the Windows Media Player of your PC. Select a Playlist or a Library on the left panel of the Windows Media Player.
3. From the Content List, drag the media files that you want to sync to your device and drop them to the Sync List.

1. Click Start Sync to start synchronizing the selected files to your device.

Notes • Use Windows Media Player 11 or later on your PC to synchronize media files to your device.

- Audio files copy faster if Windows Media Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media Player Help.

Play media

To play items on your device

Use the library on Windows Media Player Mobile to find and play songs, videos, and playlists that are stored on your device or removable storage card.

1. If you are not on the Library screen, tap Menu > Library.
2. On the Library screen, tap the Library arrow (near the top of the screen), then tap the media storage that you want use, for example, Storage Card.
3. In most cases, Windows Media Player Mobile automatically updates the library. However, you can manually update the library to ensure that it contains new files that you recently copied to your device or storage card. Tap Menu > Update Library to manually update the library list.
4. Select a category (for example, My Music or My Playlists).
5. Tap and hold the item that you want to play (such as a song, album, or artist name), then tap Play.

Notes • To play a file that is stored on your device but is not in a library, on the Library screen, tap Menu > Open File. Tap and hold the item that you want to play (such as a file or a folder), then tap Play.
- To play a media file from the Internet or a network server, tap Menu > Library then tap Menu > Open URL.

Use playlists

A playlist is a list of digital media files that play in a specified order. By using playlists, you can group audio and video files together for convenient playback.

In Windows Media Player on your PC, you can create a playlist of media files and synchronize it with your device. For more information about synchronizing media, see "Copy media files to your device" earlier in this chapter.

In Windows Media Player Mobile on your device, your playlists are available in the Library under the My Playlists category. There is also a temporary playlist, called Now Playing, which lists the currently playing file, as well as any files that have been queued up to play next. You can create a new playlist on your device by saving the current Now Playing playlist and by giving it a new name.

To save a new playlist

1. If you are not on the Library screen, tap Menu > Library.
2. Tap to select a category (for example, My Music or My Playlists).
3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list. Repeat this step until you have added all desired media files to the Now Playing list.

Note You cannot select multiple files simultaneously.

1. After adding the media files, tap Menu > Now Playing.

2. On the Now Playing screen, tap Menu > Save Playlist.

3. Enter the playlist name then tap Done.

4. To play back the playlist you created, tap My Playlists in the Library, select your playlist, then tap Play.

Troubleshooting

If you encounter a problem while using the Windows Media Player, a number of resources are available to help you troubleshoot the issue.

For more information, see the Troubleshooting Windows Media Player Mobile page at the Microsoft Web site (http://www.microsoft.com/windows/windowsmedia/player/windowsmobile/troubleshooting.aspx).

Chapter 12

Managing Your XV6800

12.1 Adding and Removing Programs

12.2 Using Task Manager

12.3 Managing Memory

12.4 Checking System Information

12.5 Resetting Your XV6800

12.6 Battery Saving Tips

12.1 Adding and Removing Programs

Before you purchase additional programs for your device, make sure that they are compatible with your device.

To add programs

1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to select a program designed for your device and processor type.
2. Read any installation instructions or documentation that comes with the program. Many programs provide special installation instructions.
3. Connect your device to the PC.
4. Double-click the *.exe file.

To remove programs

You can only remove programs that you installed. Programs that come with your device cannot be removed.

1. Tap Start > Settings > System tab > Remove Programs.
2. In the Programs in storage memory list, select the program you want to remove, and tap Remove.
3. Tap Yes. If another confirmation message appears, tap Yes again.

Note Your device does not allow you to uninstall most of the preinstalled programs.

12.2 Using Task Manager

Task Manager lets you view and stop running programs, configure the Exit button (✗), and enable the Quick Menu on the Today screen.

To open Task Manager

• Tap the Quick Menu button ( [R] ) on the top right corner of the Today screen to open the Quick Menu, then tap the Option icon ( [A]
• Tap Start > Settings > System tab > Task Manager.

To switch back to a running program

• Tap the program name in the Quick Menu.
• On the Task Manager screen, tap and hold the program name in the Running tab, then tap Activate.

To configure the Exit button

You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but keep the program running.

1. On the Task Manager screen, tap the Button tab.
2. Select the Enable the "X" button to end running programs check box.

Note When the Enable the "X" button to end running programs check box is not selected, tapping the Exit button will only close a program screen. The program is not ended and continues to run in the background.

1. Choose the action for shutting down programs (by tapping the ✗ button, or by tapping and holding the button).

2. Tap OK.

To close running programs from the Task Manager

1. On the Task Manager screen, tap the Running tab.

2. Do one of the following:

3. Select the check box of the programs that you want to close, then tap Stop Selected.

4. Tap Stop All to close all programs in the list.
5. Tap Menu > Stop All but Selected to close all programs except those which check boxes are selected.

Tip You can also close running programs from the Quick Menu on the Today screen. See "The Quick Menu" in Chapter 1 for details.

To add a running program to the exclusive list

If you add a running program to the Exclusive Programs List, it will not be closed when you tap Stop Selected or Stop All and will not be listed in the Quick Menu on the Today Screen.

1. On the Task Manager screen, tap the Running tab.
2. Tap and hold the program name, then tap Add Exclusive.

Tip To remove a program from the exclusive list, tap the Exclusive tab, select the check box of the program, then tap Remove.

To set the sorting preference for running programs in the Quick Menu

1. On the Task Manager screen, tap the Advanced tab.
2. Choose whether to sort according to Program name or Memory usage. The list will be sorted in ascending order.

12.3 Managing Memory

You may need to stop a program if it becomes unstable or the program memory is low.

To see how much memory is available

• Tap Start > Settings > System tab > Memory.
• On the Main tab, the amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory.

To see available storage card memory

You can see how much memory is available on a storage card that is inserted in your device.

1. Tap Start > Settings > System tab > Memory.
2. Tap the Storage Card tab.

To free up program memory

Try the following to free memory on your device:

• Close programs you are not currently using.
• Move e-mail attachments to a storage card.
• Move files to a storage card. Tap Start > Programs > File Explorer. Tap and hold the file, and tap Cut. Browse to the storage card folder and tap Menu > Edit > Paste.
• Delete unnecessary files. Tap Start > Programs > File Explorer. Tap and hold the file, and tap Delete.

• Delete large files. To find your largest files, tap Start > Programs > Search. In the Type list, tap Larger than 64 KB, and tap Search.

• In Internet Explorer Mobile, delete temporary Internet files and clear history information. For more information, see "Internet Explorer Mobile" in Chapter 10.

• Remove programs you no longer use.
• Reset your device.

12.4 Checking System Information

If you want to find out about technical details about your device such as the type or speed of the processor, memory size, etc., you can check under Settings for device information.

To find the operating system version number

- Tap Start > Settings > System tab > About.

The version of the operating system on your device is shown near the top of the About screen.

To get detailed device information

- Tap Start > Settings > System tab > About.

The Version tab displays important device information, including the type of processor and the amount of memory that is installed.

12.5 Resetting Your XV6800

To perform a soft reset

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.

- Use the stylus to press the RESET button found at the bottom center part of your device. Your device restarts and displays the Today screen.

To perform a hard reset

You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a soft reset does not solve a system problem. After a hard reset, the device is restored to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.

1. Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom center part of your device.

1. Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen:

1. Slide open the hardware keyboard, then press R to do a hard reset.
2. When the restoration process is complete, press the Space Bar on the hardware keyboard to restart your device.

12.6 Battery Saving Tips

How long your battery power lasts depends on battery type and how you use your device. Here are a few tips on saving battery power:

• When the device is not in use, press POWER to switch off the display.
• Tap Settings > System tab > Power. On the Advanced tab of the Power settings screen, you can specify when your device automatically turns off the display to conserve battery power. For optimum conservation, specify 3 minutes or less.
• Use the AC adapter to plug your device into external power whenever possible, especially when using a storage card or when using a modem or other peripherals.
• Adjust the backlight settings. For more information, see "To set the backlight to dim after a time delay" in Chapter 4.
• When you are out of range of wireless networks, turn Wi-Fi off. Searching for networks consumes a lot of power. For more information, see "Wi-Fi" in Chapter 10.
• Turn Bluetooth off when you are not using it. For more information, see "Bluetooth" in Chapter 10.
• Lower the volume.

- Close battery-intensive programs, such as the Camera, when you are done using them. Make sure the programs are ended and are not continuously running in the background. For more information about ending running programs, see "To close a program" in this chapter.

Chapter 13

Using Other Applications

13.1 Voice Speed Dial

13.1 Voice Speed Dial

You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word.

Create a voice tag for a phone number

1. Tap Start > Contacts to open the Contacts list.

2. Do one of the following:

3. Tap and hold the desired contact, then tap Add Voice Tag.

4. Select the desired contact, then tap Menu > Add Voice Tag.

5. Tap the desired contact to open the contact's detailed screen, then tap Menu > Add Voice Tag.

6. Select the phone number that you want to create a voice tag, then tap the Record button (☐).

1. When completed, a Voice Tag icon (💡) will be displayed on the right of the item.

2. When you create a voice tag for the item, you can do one of the following:

3. Tap the Record button ( ) to rebuild the voice tag.

4. Tap the Play button ( ) to play the voice tag.
5. Tap the Delete button ( ) to delete the voice tag.

Tip To ensure voice recognition accuracy, please record your voice in a quiet place.

Create voice tag for a program

1. Tap Start > Settings > Personal tab > Voice Speed Dial.
2. The Application tab displays a list of all installed programs on your device. The procedure for creating a voice tag for a program is the same as the procedure for creating a voice tag for a phone number.
3. After you have created a voice tag for a program, you can then launch the program by saying the recorded voice tag after pressing the VOICE COMMAND button.

Make a call or launch programs using voice tags

1. Press the VOICE COMMAND button.
2. After a "beep" sound, say the recorded voice tag that you have assigned to the phone number you want to call or the program you want to launch. The system will repeat the voice tag and then dial out or launch the program automatically.

Note If the system cannot recognize your voice tag, please speak clearly and reduce the surrounding noise, then try again.

To view and test the voice tags you have created

1. Tap Start > Settings > Personal tab > Voice Speed Dial.

2. The Voice Tag tab displays a list that contains all the voice tags you have created. Select an item in the list, and you can do one of the following:

3. Tap the Record button ( ) to rebuild the voice tag.

4. Tap the Play button ( ) to play the voice tag.
5. Tap the Delete button ( ) to delete the voice tag.

132 Using Other Applications

Appendix

A.1 Specifications

A.2 Regulatory Notices

A.3 Additional Safety Information

A.1 Specifications

System Information

Processor QUALCOMM® MSM7500, 384 MHz

Memory - ROM : 256 MB embedded NAND Flash- RAM : 64 MB SDRAM(Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the Operating System, applications, and data, the actual available memory is less than what is written).

Operating System Windows Mobile® 6.1 Professional

Power

Battery Rechargeable Lithium-ion polymer battery, 1500 mAh

Charging Time Up to 4 hours

AC Adapter Voltage range/frequency: 100 - 240V AC, 50/60 HzDC output: 5V and 1A

Display

LCD Type 2.8" transmissive TFT-LCD with backlight LEDs, touch-sensitive screen

Resolution 240 x 320 dot pixels with 64K colors

Alignment Portrait and Landscape

Cellular Radio Module

Functionality CDMA2000 1xEVDO/1xRTT and IS-95A/B voice or data

Mode Dual-band (800 and 1900 MHz)

Internal Antenna Yes

Physical
Dimensions	110 mm (L) x 59 mm (W) x 18.5 mm (T)
Weight	165g (with battery)

Camera Module
Type	2 Megapixel color CMOS camera with flash light
Resolution	Photo: 1600x1200 (UXGA), 1280x960 (SXGA), 640x480 (VGA), 320x240 (QVGA), 160x120 (QQVGA)Video: 352x288 (CIF), 320x240 (QVGA), 176x144 (QCIF), 128x96MMS Video: 176x144 (QCIF), 128x96
Digital Zoom	Up to 8x

Connections
Infrared	IrDA SIR
I/O Port	HTC ExtUSBTM: an 11-pin mini-USB and audio jack in one(ExtUSB is a proprietary connection interface that is trademarked by HTC).
Car Antenna Connector	For connecting to an external phone antenna (850MHz and 1900MHz)
Wireless Connections	Bluetooth®, Wi-Fi®

Controls and Lights

Navigation Buttons • 5-way Navigation Control

• Five program buttons : CAMERA, COMM MANAGER, MESSAGING, INTERNET EXPLORER MOBILE, VOICE COMMAND
• Two phone functions : TALK and END
• START MENU button
• Two OK buttons
• Two soft keys
• Jog Wheel
• POWER button
• RESET button
• WLAN switch

Hardware Keyboard QWERTY keyboard with two additional soft keys, and an ambient sensor that detects low light and automatically illuminates the keyboard.

LEDs The left LED shows the following:

• A blinking Blue light for Bluetooth system notification of powered-up and ready to transmit radio frequency signal.
• A blinking Green light for Wi-Fi status.
• When both Bluetooth and Wi-Fi are enabled, their lights blink alternately.
  The right LED shows Green and Amber lights for CDMA standby and network status, notification, and battery charging status.

Audio

Audio Controller AGC

Microphone/Speaker

Built-in/Dual, Hands-free

Headphone MP3/WAV/WMA/AAC/AAC+ codec

Expansion Slots

Memory Card Slot microSD

A.2 Regulatory Notices

Regulatory Agency Identifications

For regulatory identification purposes, your product is assigned a model number of TITA100.

FCC ID: NM8TITA100. IC:4115A-TITA100.

To ensure continued reliable and safe operation of your device, use only the accessories listed below with your TITA100.

The Battery Pack has been assigned a model number of TRIN160.

This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.

Federal Communications Commission Notice

DECLARATION OF CONFORMITY

UT Starcom hereby declares that this wireless device, TITA100, manufactured by High Tech Computer Corp., is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity can be found at the following Internet address:

http://www.danger.com/consumers.php.

This wireless device, TITA100, manufactured by High Tech Computer Corp., complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: High Tech Computer Corp.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or TV reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.

FCC RF EXPOSURE INFORMATION

In August 1996, the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this device complies with the FCC guidelines and these international standards.

BODY-WORN OPERATION

Your TITA100 PDA phone was tested for typical body-worn operations with the back of the device kept 1.5 cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.5 cm must be maintained between the user's body and the back of the device, including the antenna. Third-party belt-clips, holsters and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain 1.5 cm separation distance between the user's body and the back of the device, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.

When carrying the device on you, turning the display in towards the body will minimize RF exposure and maximize antenna efficiency.

Modifications

The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by High Tech Computer Corporation may void the user's authority to operate the equipment.

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices

On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities.

While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.

The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box.

The ratings are not guarantees. Results will vary depending on the user's hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings. TITA100 is rated M3.

Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use.

In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This should provide the hearing aid user with "normal usage" while using their hearing aid with the particular wireless phone. "Normal usage" in this context is defined as a signal quality that is acceptable for normal operation.

The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications Industries

Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.

For information about hearing aids and digital wireless phones

FCC Hearing Aid Compatibility and Volume Control:

http://www.fcc.gov/cgb/dro/hearing.html

Gallaudet University, RERC:

http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm

SAR Information

SAR: 1.130 W/kg @1g (USA)

THIS MODEL DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.

For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the High Tech Computer Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the FCC RF exposure guidelines.

Your wireless mobile CDMA phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:

• American National Standards Institute (ANSI) IEEE. C95.1-1992.
• National Council on Radiation Protection and Measurement (NCRP). Report 86. 1986.
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996.
- Ministry of Health (Canada), Safety Code 6. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile CDMA phone employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg*. Tests for SAR are conducted with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a device model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.

The highest SAR value for this model device when tested for use at the ear is 1.130 W/Kg @ 1g and when worn on the body, as described in this user guide, is 0.922 W/Kg @ 1g. (Body-worn measurements differ among device models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for safe exposure.

The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of https://gullfoss2.fcc.gov/prod/oet/cf/eas/reports/GenericSearch.cfm after searching on FCC ID: NM8TITA100.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications & Internet Association (CTIA) web-site as http://www.phonefacts.net.

* In the United States and Canada, the SAR limit for mobile CDMA phone used by the public is 1.6 Watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Normal condition only to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment.

FCC Enhanced 911 (E911) Rules

BACKGROUND

The Federal Communications Commission (FCC) requires wireless carriers to transmit specific latitude and longitude location (Automatic Location Identification = ALI) information as well as "911" calls to Public Safety Answering Points (PSAPs) to identify the location of the caller in case of emergency.

Generally, the rules require that carriers identify an E911 caller's location within 50 meters of the actual location for 67 percent of calls and within 150 meters of the actual location for 95 percent of calls.

TITA100's ALI CAPABILITY

The TITA100 is an ALI-capable PDA phone equipped with a GPS (Global Positioning System) receiver supporting a satellite-based GPS ALI-capable network to comply with the FCC's ALI requirements.

The network compliance with the above FCC requirements is dependent on: (a) the use of digital technology by the wireless network; (b) GPS satellite signals being able to reach the handset (such transmissions do not always work indoors, for example); and (c) handset signals reaching wireless "base stations" (atmospheric and environmental conditions may cause variations in handset receiving signal strength).

Also the transmission of the ALI information is subject, in part, to system constraints within the wireless network to which the E911 signal is transmitted and over which UT Starcom has no control.

Finally, customers are advised that the TITA100's ALI capability is to be used for E911 purposes only.

For more information about placing emergency calls, see Chapter 3.

Compliance with Other FCC Regulations

OPERATING PROCEDURES

Never violate any of the following Rules and Regulations of the FCC when using your device. Such violations are punishable by fine, imprisonment or both.

• Never use obscene, indecent, or profane language.
• Never use your device to send false distress calls.
• Never wiretap or otherwise intercept a phone call, unless you have first obtained the consent of the parties participating in the call.
• Never make any anonymous calls to annoy, harass, or molest other people.
• Never charge another account without authorization, to avoid payment for service.
• Never willfully or maliciously interfere with any other radio communications.

- Never refuse to yield the line when informed that it is needed for an Emergency Call. Also, never take over a line by stating falsely that it is needed for an emergency.

IC Statement

Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Important Note

IC Radiation Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

This Class B digital apparatus complies with Canadian ICES-003.

WEEE Notice

The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.

The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal.

The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city center, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment.

RoHS Compliance

This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.

A.3 Additional Safety Information

This section provides more safety information in addition to the information at the beginning of the user manual.

When Driving

Do Not Use The PC Functions Of Your Pocket PC While Driving Or Walking

Never use the personal computer functions of your device while driving an automobile or any other moving vehicle. Always pull out of traffic and come to a stop in a legally permissible and safe location before using your device. Failure to do so could result in serious bodily injury in a traffic accident.

When driving:

• Always secure your device in its leather pouch.
- Never place your device on the passenger seat or anyplace else in the car where it can become a projectile during a collision or stop.
- An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Never store or transport flammable liquids, gases or explosive materials in the same compartment of your automobile as the device or any of its accessories, as possible sparking in the device could cause ignition or explosion.

Never use your device while walking. Usage while walking could result in bodily injury caused by inattention to automobile traffic or other pedestrian hazards.

Using The Phone Function Of Your Pocket PC While Driving Is Extremely Dangerous

Talking on or using your Pocket PC phone while driving is extremely dangerous and is illegal in some states. Remember, safety comes first. Check the laws and regulations on the use of phones in the areas where you drive. Always obey them.

If you must use the phone function while driving, please:

• Give full attention to driving. Driving safely is your first responsibility.
• Use hands-free operation and/or one-touch, speed dialing, and auto answer modes.
• Pull off the road and park before making or answering a call.

WARNING: Failure to follow these instructions could lead to serious personal injury and possible property damage.

When Using Your Device Near Other Electronic Devices

Your wireless handheld portable PDA phone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals.

Most modern electronic equipment is shielded from RF energy. However, certain electronic equipment may not be shielded against the RF signals from your wireless PDA phone; therefore, use of your PDA phone must be restricted in certain situations.

In addition, the computer portion of your device produces low levels of RF energy due to the generation of digital timing pulses by its clock oscillator circuits. Your device has been equipped with internal shielding to minimize stray emissions of RF energy. However, use of the computer functions of your device must be restricted in certain situations.

PACEMAKERS

The Health Industry Manufacturers Association recommends that a minimum separation of six (6") inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Never come closer than six (6) inches to a person with a heart pacemaker implant when using your device. Doing so could result in interference with the function of the pacemaker.

Persons with pacemakers:

• Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON.
• Should not carry the phone in a breast pocket.
• Should use the ear opposite the pacemaker to minimize the potential for interference.

Note: This is not necessary if the PDA phone is not held to the ear.

- If you have any reason to suspect that interference is taking place, turn the phone OFF immediately.

HEARING AIDS

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives.

For more regulatory information about hearing devices, see "FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices".

OTHER MEDICAL DEVICES

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.

HOSPITALS AND HEALTH CARE FACILITIES

Turn your device OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

ELECTRONIC DEVICES IN VEHICLES

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

POSTED FACILITIES

Turn your device OFF where posted notices so require.

Turn Off Your Device Before Flying

AIRCRAFT

FCC regulations prohibit using the transmitting and phone functions of your device while in the air. In addition, most airline regulations prohibit the on-board use of portable PCs (and all other portable electronic devices that could potentially emit stray RF energy), particularly during take-offs and landings, to prevent any possible interference with the reception of signals by airborne electronic navigational devices.

Turn your device OFF before boarding an aircraft. Always request and obtain prior consent and approval of an authorized airline representative before using your device aboard an aircraft. Always follow the instructions of the airline representative whenever using your device aboard an aircraft, to prevent any possible interference with airborne electronic equipment.

Turn Off Your Device in Dangerous Areas

BLASTING AREAS

To avoid interfering with blasting operations, turn your device OFF when in a "blasting area" or in areas posted "Turn off two-way radio". Obey all signs and instructions.

POTENTIALLY EXPLOSIVE ATMOSPHERES

Turn your device OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as gas stations; below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or articles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle's engine.

General Safety

Your pocket PC is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the product, battery and adapter/charger.

Failure to follow the directions below could result in serious bodily injury and/or property damage due to battery liquid leakage, fire or rupture.

DO NOT use or store this equipment in a place where it will be exposed to high temperatures, such as near an open flame or heat-emitting equipment.

DO NOT drop your device or subject it to severe shock. When not using, lay down the unit to avoid possible damage due to instability.

DO NOT expose this equipment to rain or spilled beverages.

DO NOT use unauthorized accessories.

DO NOT disassemble the device or its accessories. If service or repair is required, return unit to an authorized UT Starcom cellular service center. If the unit is disassembled, the risk of electric shock or fire may result.

Never allow metallic objects, such as staples and paper clips, to get into the inside of your device.

Never touch the liquid that might leak from a broken liquid crystal display. Contact with this liquid could cause a skin rash. If the crystal display liquid should come into contact with the skin or clothing, wash it immediately with clean water.

In the event that the device emits an unusual odor or sound or generates smoke, immediately disconnect the AC adapter from the power outlet, then detach the battery.

Antenna Safety

Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage your device, or result in violation of FCC regulations. Please contact your local dealer for replacement antenna.

Do not use the device with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna.

Battery Safety

Your device uses a removable and rechargeable lithium ion battery. Please contact customer service for assistance should you need a replacement battery.

DOs

• Only use the battery and charger approved by the manufacturer.
• Only use the battery for its original purpose.
• Try to keep batteries in a temperature between 41^ (5°C) and 95^ (35°C).
• If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using.
• Completely drain the battery before recharging. It may take one to four days to completely drain.
• Store the discharged battery in a cool, dark, and dry place.
• Purchase a new battery when its operating time gradually decreases after fully charging.
• Properly dispose of the battery according to local regulations.

DON'Ts

• Don't attempt to disassemble the battery – it is a sealed unit with no serviceable parts.
• Don't expose the battery terminals to any other metal object (e.g., by carrying it in your pocket or purse with other metallic objects such as coins, clips and pens). This can short circuit and critically damage the battery.
• Don't leave the battery in hot or cold temps. Otherwise, it could significantly reduce the capacity and lifetime of the battery.
• Don't dispose of the battery into a fire.

Lithium ion batteries are recyclable. When you replace the removable battery, please request the repair center to recycle the battery in accordance with RBRC standards. When disposing of the battery by yourself, please call RBRC at [phone] for proper disposal tips.

Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with the eyes or skin, could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the eyes thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into contact with the skin or clothing, wash it away immediately with clean water.

Adapter/Charger

Use the Correct External Power Source

A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product.

The AC Adapter/Charger designed by UT Starcom for this unit requires the use of a standard 120 V AC power source for device operation.

Never attempt to disassemble or repair an AC adapter/charger. Never use an AC adapter/charger if it has a damaged or worn power cord or plug. Always contact a UT Starcom authorized service center, if repair or replacement is required.

Never alter the AC cord or plug on an AC adapter/charger. If the plug will not fit into the available outlet, have a proper outlet installed by a qualified electrician.

Never allow any liquids or water to spill on an AC adapter/charger when it is connected to an AC power source.

Always use the authorized UT Starcom AC adapter/charger to avoid any risk of bodily injury or damage to your cellular phone or battery.

Never attempt to connect or disconnect the AC adapter/charger with wet hands. Always unplug the AC adapter/charger from the power source before attempting any cleaning. Always use a soft cloth dampened with water to clean the equipment, after it has been unplugged.

Handling the cord on this product or cords associated with accessories sold with this product, will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

Always disconnect the travel charger or desktop charger from the power source when it is not in use.