OCD T 651-2 ES - Cooker Arçelik - Free user manual and instructions

Product Type	Gas Hob
Brand	Arçelik
Model	OCD T 651-2 ES
Number of Gas Burners	4
Energy Efficiency (Gas Hob)	63.0%
Ignition Type	Automatic electric ignition
Safety Features	Flame failure safety device
Control Type	Knobs
Material	Stainless steel
Installation Type	Built-in
Cleaning Instructions	Wipe with damp cloth and mild detergent
Gas Connection	Natural gas or LPG (adjustable)
Certification	CE

Frequently Asked Questions - OCD T 651-2 ES Arçelik

How do I ignite the gas hob?

Press and turn the corresponding knob to the maximum position (large flame symbol) while holding down. The automatic ignition will produce sparks. Once the flame is lit, keep the knob pressed for a few seconds to activate the safety device, then release.

What should I do if the flame goes out unexpectedly?

The hob is equipped with a flame failure safety device. If the flame goes out, the gas supply will be automatically cut off. Turn the knob to the off position, wait at least 1 minute, and then try to reignite.

How do I clean the gas hob?

Allow the hob to cool completely. Remove pan supports and burner caps. Wash them with warm soapy water. Wipe the hob surface with a damp cloth and mild detergent. Do not use abrasive cleaners or scouring pads. Dry thoroughly before reassembling.

Can I use LPG (liquid petroleum gas) with this hob?

Yes, the hob can be converted for use with LPG. Please refer to the instruction manual for the conversion procedure or contact a qualified technician. LPG requires different injectors and pressure adjustment.

Why is the flame uneven or yellow?

Uneven or yellow flames may indicate blocked burner ports or incorrect air adjustment. Clean the burner caps and ensure the ports are clear. If the problem persists, adjust the air shutter according to the manual or call for service.

What is the warranty period for this hob?

The standard warranty period is typically 2 years for parts and labor. However, it may vary by region. Please check your purchase documents or contact Arçelik customer support for specific warranty details.

How do I replace a burner cap or grate?

Replacement parts can be ordered from Arçelik service centers or authorized dealers. Ensure the hob is cool and disconnected from power/gas before replacing. Simply lift off the old cap or grate and place the new one in position.

Is professional installation required?

Yes, due to gas and electrical connections, installation must be carried out by a qualified technician in accordance with local regulations. Improper installation may cause gas leaks or electric shock.

What cookware is suitable for this gas hob?

Use flat-bottomed cookware that matches the burner size. Avoid oversized pans that overhang the burner. For best efficiency, use pans with a diameter as recommended in the manual (typically between 12-24 cm for different burners).

How do I troubleshoot if the ignition doesn't spark?

Check if the hob is plugged in and the electrical supply is on. Ensure the burner caps are properly seated. Clean the spark electrode with a dry cloth. If still no spark, the spark plug or module may need replacement by a technician.

USER MANUAL OCD T 651-2 ES Arçelik

INSTRUCTION BOOKLET(*)
Information for domestic gas-fired hobs
Comply with EU directive 2009/125/EC – Regulation No 66/2014(*)
Brand	ARÇELİK
Model	OCD T 651-2 ES
Type of hob	Electrical
	Gas	x
	Mix
Number of gas burners		4
Energy efficiency per gas burnerEE gas burner	Front Left Zone	63,0
	Rear Left Zone	63,0
	Front Right Zone	-
	Rear Right Zone	63,0
	Right Zone	-
	Center Zone	-
	Left Zone
	Front Zone
	Rear Zone	-
Energy efficiency for the gas hob EE gas hob		63,0

(*) only for EU countries
7763670177
185373353 AA
en_US