BM5221MA - Dishwasher Profilo - Free user manual and instructions

Product Type	Freestanding Dishwasher
Brand	Profilo
Model	BM5221MA
Place Settings	13
Energy Efficiency Class	E (approximate)
Water Consumption per Cycle	9.5 L
Energy Consumption per Cycle	0.92 kWh
Program Duration (Eco)	4:55 h
Noise Level	49 dB(A)
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	45 kg
Power Supply	230 V, 50 Hz
Current	10 A
Number of Programs	6
Programs	Eco, Auto, Intensive, Normal, Quick, Rinse
Delay Start	Yes, up to 24 h
Salt Indicator	Yes
Rinse Aid Indicator	Yes
Child Lock	No (not specified)
Self-Cleaning Filter	No, manual cleaning required

Frequently Asked Questions - BM5221MA Profilo

How do I install the Profilo BM5221MA dishwasher?

Ensure the dishwasher is placed on a level floor. Connect the water inlet hose to a cold water supply (3/4 inch thread) and the drain hose to a suitable drain pipe. Plug into a grounded 230 V outlet. Level the appliance using the adjustable feet.

What is the correct way to load dishes?

Load plates facing the spray arms, place cups and bowls upside down, and ensure utensils are placed in the cutlery basket with handles down. Do not overfill to allow water circulation.

How do I clean the filter?

Turn off the dishwasher and remove the lower spray arm. Unscrew the cylindrical filter (turn anticlockwise) and lift out the flat filter. Rinse both under running water with a soft brush. Reassemble in reverse order.

What does the '4:55' display mean?

The display shows the remaining time of the selected program. For the Eco program, the duration is approximately 4 hours and 55 minutes.

How do I add salt and rinse aid?

Open the salt reservoir cap (usually at the bottom) and fill with dishwasher salt until the indicator shows full. For rinse aid, open the dispenser on the door and fill to the 'max' line. Adjust the setting according to water hardness.

Why is the dishwasher not starting?

Check if the door is properly closed and latched. Ensure the power cord is plugged in and the outlet has power. Verify that the water supply is turned on. Press the Start button firmly.

How can I reduce noise?

Ensure the dishwasher is level to prevent vibration. Avoid overloading and ensure no utensils are sticking out. The noise level is normally around 49 dB(A).

What is the water consumption per cycle?

The dishwasher uses approximately 9.5 liters of water per standard cycle, which is efficient for a 13-place setting machine.

How do I reset the dishwasher?

Press and hold the Start button for 3 seconds or turn the program selector to the 'Off' position. Wait 1 minute and then select a new program.

Where can I find spare parts?

Spare parts such as filters, spray arms, and racks can be purchased from authorized Profilo service centers or online retailers. Use the model number BM5221MA for accurate parts.

USER MANUAL BM5221MA Profilo

Pure mechanical component diagram without any text, numbers, or symbols

13 x

9,5 L

4:55 ABCD