HAP726 - Air purifier HOLMES - Free user manual and instructions

Product Type	Air Purifier
Brand	Holmes
Model	HAP726
Dimensions (H x W x D)	12.5 x 7.2 x 7.2 in (31.8 x 18.3 x 18.3 cm)
Weight	3.2 lb (1.45 kg)
Power Supply	120V AC, 60Hz
Power Consumption	30 Watts
Filtration Type	HEPA-type filter with activated carbon pre-filter
CADR (Dust/Smoke/Pollen)	50/55/60 CFM
Coverage Area	Up to 100 sq ft (9.3 m²)
Fan Speeds	3 (Low, Medium, High)
Noise Level (max speed)	~48 dB
Timer	2, 4, 8 hours
Air Quality Sensor	No
Filter Replacement Indicator	Yes, indicator light
Maintenance	Replace filter every 6-12 months
Cleaning Instructions	Wipe exterior with damp cloth; vacuum pre-filter
Safety Features	Automatic shut-off when front grille removed; UL listed
Certifications	ENERGY STAR, CARB compliant
Warranty	1 year limited
Included Accessories	1 HEPA-type filter (pre-installed), user manual

Frequently Asked Questions - HAP726 HOLMES

How often should I replace the filter on my Holmes HAP726?

The filter should typically be replaced every 6 to 12 months, depending on usage and air quality. The filter replacement indicator light will alert you when it's time.

How do I clean the Holmes HAP726 air purifier?

Unplug the unit and wipe the exterior with a soft, damp cloth. For the pre-filter, vacuum it gently every 2-4 weeks. Do not wash the HEPA filter.

Can I use essential oils with the Holmes HAP726?

No, it is not recommended to add essential oils directly to the unit. This may damage the filter and void the warranty.

What is the coverage area for the Holmes HAP726?

The HAP726 is designed for small rooms up to 100 square feet (9.3 m²). For larger rooms, consider a higher CADR model.

Does the Holmes HAP726 have an auto mode?

No, this model does not include an auto mode or air quality sensor. It operates with manual fan speed settings.

How do I reset the filter replacement light?

After replacing the filter, press and hold the filter reset button for 3 seconds until the indicator light turns off.

Is the Holmes HAP726 quiet?

On low speed, it operates very quietly (around 30 dB). On high speed, it is audible (about 48 dB), comparable to a conversation.

Can I wash the HEPA filter?

No, the HEPA-type filter is not washable. Attempting to wash it will damage the filter media. Only vacuum the pre-filter.

What is the power consumption of the Holmes HAP726?

It consumes approximately 30 watts on high speed, making it energy-efficient and ENERGY STAR certified.

Where is the filter located on the Holmes HAP726?

The filter is located inside the front grille. To access it, unplug the unit and gently pull the grille forward to remove it.

USER MANUAL HAP726 HOLMES

HAP8756_BEM2.qxd:127115/9100040002463 6/17/08 2:12 PM Page 1

TROUBLESHOOTING

TROUBLESHOOTING

PROBLEM SOLUTION
Unit will not operate ▶	• Check to make sure unit is properly plugged in. • Check to make sure the unit is on by pressing the ( ○) button. • If the front grill does not fit properly, the unit will not operate. Make sure the filters are properly installed and make sure front grill is sealed correctly.
Decreased air flow ▶	• If the HEPA Filter Life indicator is red, the HEPA filters need to be changed. • If the filters have not been changed in a year or more, change the HEPA filters. Check to ensure nothing is blocking air inlet and filtered air outlet. • Be sure the plastic bag has been removed from the carbon filter. • If the carbon filter life indicator is yellow, the carbon filters need to be changed. • Ensure carbon filters are changed every 3-6 months.

If you have any questions regarding your product or would like to learn more about other Holmes® products, please contact our Consumer Service Department at 1-800-546-5637 or visit our website at www.holmesproducts.com.

WARRANTY INFORMATION

5 YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively "JCS") warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS's Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-546-5637 and a convenient service center address will be provided to you.

In Canada

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-546-5637 and a convenient service center address will be provided to you.

WARRANTY INFORMATION

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario LSY 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

© 2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

127115/9100040002463

HAP726/756/875608EM2

Printed In China

Holmes

Owner's Guide

HAP726/756/8756

TrueHEPA

Allergen Remover

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS

IMPORTANT SAFEGUARDS

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions

should always be followed to reduce the risk of fire, electric shock, and injury to payors. These precautions include:

1. Read all instructions before using the appliance

2. To avoid fire or shock hazard, plug the appliance

directly into a 120V AC electrical outlet.

1. If the filter is covered by a bag when shipped, remove plastic bag before use.

2. Keep the cord out of heavy traffic areas. To avoid fire

hazard, NEVER put the cord under rugs, near heat

registers, radiators, stoves, or heaters.

1. To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.

2. Close supervision is necessary when any appliance is

used by or near children, or disabled persons.

1. Always unplug the air purifier before moving or clearing the unit, opening the grill, changing the filters

and whenever the unit is not in use. To disconnect the

unit, be sure to pull the plug and not the cord.

1. NEVER drop or insert any objects into the openings of the unit

2. Do not operate any appliance with a damaged cord or

plug. If the motor fan fails to operate or the unit has

been dropped or damaged in any manner, return

appliance to manufacturer for examination and/or repair.

1. Use appliance only for intended household use as

described in this manual. Any other use not recommended by the manufacturer may cover. For electric shock,

by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended

or sold by the manufacturer may cause hazards.

1. DO NOT use outdoors.

2. NEVER place on a soft surface such as a bed or sofa as this could cause the unit to tin over and block the air

the board causes the drill to op over and break the air inlet or outlet grills.

1. Keep unit away from heated surfaces and open flames.

2. DO NOT attempt to repair or adjust any electrical or mechanical functions so this unit. Being so will void

mechanical function on this unit. Doing so min void your warranty. The inside of the unit contains no user

servioable parts. All servicing should be performed

by Jarden Consumer Solutions or an authorized

Jarden Consumer Solutions Center. 15. DO NOT place anything on top of up

1. DO NOT plan anything on top of which

2. NEVER use detergents, gasoline, glass cleaner, furniture

polish, paint thinner, or other household solvents to

clean any part of the appliance. 17. Always turn the appliance off before unplugging it

1. Always turn the appliance off before unlogging it.

2. This appliance should only be used in a room with

3. This appliance should only be used in a room with temperatures between 40°F and 110°F.

4. WARNING: To reduce the risk of fire or electric shock,

DO NOT use this air purifier with any solid-state speed control device.

control device.

PLEASE SAVE THESE

IMPORTANT SAFETY

IMPORTANT SALE

INSTRUCTIONS

PLUG SAFETY

CAUTION: To reduce the risk of

electric shock, THIS PRODUCT

HAS A POLARIZED PLUG (one

blade is wider than the other). This plup will fit into a colored

this plug will fit into a polarized outlet only one way. If the plug does

not fit fully into the outlet, reverse

the plug. If it still does not fit, contact qualified electrician to install the power outlet. DO NOT ALTER THE PLUG IN

install the proper outlet. DO NOT ALTER THE PLUG IN ANY WAY

ANT WAI

CORD SAFETY

• The length of cord used on this appliance was selected

to reduce tangling or tripping hazards.

- If a longer cord is necessary, an approved extension card may be used. The electrical fuse of the extension

cord may be used. The electrical rating of the extension cord must be equal to or greater than the electrical

rating of the air purifier (see rating label marked on

product).

- Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop

where it can be pulled on by children or accidentally

tripped over.

FEATURES

GET TO KNOW YOUR AIR CLEANER

Your true HEPA air cleaner removes up to 99.97% of airborne

allergens as small as 0.3 microns, including ragweed pollen,

grass pollen, tree pollen, household dust, dust mite debris,

mold spores, pet dander and smoke from the air passing through the filter.

through the list.

FEATURES

FEATURES Dual Position

Dual Position

The air punther can stand upright or lie on its side. Also designed to fit with its back flush against the wall. When

designed to fit with for desk strain against the wall. When positioning the unit, please be sure the air inlat grill, filter

positioning the unit, please be sure the air inlet grid, mosra and air outlet are not blocked to ensure maximum airflow.

Filter Window

On the front grill, there is a small

opening that will enable you to

see your carbon filter at a glance.

As it picks up dust and deoins, the window will turn to gray indicating the air purifier is

working and you may need to change the carbon filters.

HEPA Filter Indicator

When the HEPA filter is approaching the end of its useful life, the

indicator light will turn red. When the red indicator light starts

flashing, it is time to change the HEPA filter.

Carbon Filter Indicator

When the carbon filter indicator light turns yellow, it is time

to change the carbon filter.

Energy Star Rated

This product earned the ENERGY STAR by meeting strict energy efficiency guidelines set by the US EPA, US EPA does

energy efficiency guidelines set by the US EPA. US EPA does not endorse any manufacturer claims of healthier indoor air

from the use of this product. The energy efficiency of each

ENERGY STAR qualified model is measured based on a ratio between the models OLEO for Brust and the electrical energy

between the model's CADR for Dust and the electrical energy, it consumes, or CADR/Watt

It consumes, or OABIO Waste. Timor

The times allows you to run your air purifier at your

The timer allows you to run your all partner at your convenience, for up to 16 hours. To operate using the timer

mode, at the control panel on the air purifier, turn the unit

To activate the timer, press the "+" and "-" speed buttons at the

same time for approximately 3 seconds.

The numbers in the display will begin flashing and the light will

appear to indicate timer function is on. Push "+" or "-" button to pull through the timer before (1, 10). When you have reached

cycle through the other options (1-16). When you have reached desired hours that you want your air purifier to run, release finger

from the button; the numbers will stop flashing, timer will be on,

and the screen will revert back to displaying a speed setting. The

air purifier will then operate for the selected period or time and shut off automatically. Sneels can be changed once the timer is

and, on automatically. Special can be changed once the timer is activated by pushing the "+" or "-" buttons. To view the time left

to run once timer has been set, push the "+" and "-" at the same

time for 3 seconds. You can manually turn the air purifier off by opening the /() button app.

pressing the (O) button order.

PRE-OPERATING INSTRUCTIONS

NOTE: The front drill should not be removed when the

NOTE: the unit shall not be removed when the unit is on its side.

1. After removing the unit from the box, take the plastic

covering off the unit and properly dispose of it.

1. Lay the air punfeir flat on its back with the front / air intake grill pointing up

2. Open the door of the air purifier by rargfully placing

3. Open the door of the air partner by tarefully placing fingers in indentation on the right side of the door and

gently pull forward.

1. The carbon filters, which are packed in a plastic bag in the

box, should be removed from plastic bag and then placed on each of the HERL filter. The plastic tube on the HERL

on each of the LTFA filters. The plastic tabs on the LTFA filter will hold the carbon in place (see Figure 1).

1. Replace the front grill by aligning tab on left hand side and

swinging down. Gently press until front grill is firmly in place.

Figure 1

Figure 1 D

∴ m - 1 ≠ 0 ;

[Non-Text]

The quick brown fox jumps over the lazy dog.

[Non-Text]

(1)

∴ m - 1 ≠ 0 ;

A. HEPA FILTER A

B. CARBON FILTER

OPERATIONS

1. Select location where air intake grill and filtered air

outlet are not obstructed.

1. Plug into a 120V AC electrical outlet.

2. The air purifier is now ready for use. Turn the unit on by opening the ( ) button (the air cleaner will turn

by pressing the ( ○ ) button (the air cleaner will turn on to the highest setting). Select the desired operating

speed: High (4), Medium (3), Low (2) or Sleep (1) by

pushing the "+"

Figure 2

4

B

c

D

1. 2017年1月1日

For continuous use, it's recommended to operate the air

purifier at the MEDIUM setting. For quieter operation or use in a bedroom, select the LOW as clean setting. When

Use in a bedroom, select the LOW or Sleep setting. When high levels of air pollution are present, select the HIGH

high levels of air pollution are present, cover the high setting to quickly circulate and filter the room air.

(No text)

1. The outside of the air purifier can be cleaned with a

soft, clean damp cloth.

1. The filtered air outlet / dust with a small soft

2. If you wish to clean the inside of the air purifier, please

remove filters and only use a dry, soft cloth to wipe

DOWN. E. DO NOT work filts

WARNING: Do not allow moisture to come in contact with

the main housing of the air purifier.

(No text)

FILTER REPLACEMENT INSTRUCTIONS

1. On average, HEPA filters need to be replaced every

12-18 months. Carbon filters need to be replaced every 3-6 months. Filters life will very depending on air

every 3-6 months. After the will vary depending on all quality and usage.

. Turn off and unplug the air purifier before attempting

to replace the filters

1. To access filter compartment, open front grill door by placing fingers in the indentation on the right side of

plating fingers in the indentation on the right side of the door, gently pull to the right before pulling forward

(see Figure 3).

1. Remove each of the filters from the unit by pulling clearly towards you.

2. To replace the carb

carbon filter and insert a new carbon filter in its place

after first removing the plastic bag. Using the plastic take as a guilding (see Figure 1).

1. To replace the HFPA filter, discard the old HFPA filters, DO

NOT attempt to clean. Put the carbon filter back on the

new HEPA filter. Insert the new HAPF600 HEPA filter into

the unit, by sliding it onto the hang tabs (see Figure 4).

REPLACEMENT FILTER

1. After replacing the filters, RESET the Filter Life Indicator by inserting a small object (such as a paper clip) into the hole below the filter change light marked reset ( ⚙️ ). The red LED is the HEPA filter light and the yellow LED is the carbon filter light.

REPLACEMENT FILTERS ARE AS FOLLOWS: NOTE: Carbon and HEPA Filters are not washable and should be replaced at the recommended intervals.

Air Cleaner Model Number	Filter Quantity Needed	Filter Model Number	Filter Description
HAP726-U	2	HAPF600 HAP6000 B filter	True HEPA Filter
HAP756-U HAP8756-U	3	HAPF600 HAP6000 B filter	True HEPA Filter
HAP726-U	2	HAPF60 C filter	Carbon filter
HAP756-U HAP8756-U	3	HAPF60 C filter	Carbon filter

NOTE: Filters can be purchased at a retailer near you or by calling 1-800-546-5637.