X-Blower X12904 - Camera Lasko - Free user manual and instructions

Product Type	High-Velocity Floor Fan
Brand	Lasko
Model	X-Blower X12904
Power Supply	120V AC, 60Hz
Amperage Rating	10 amps (with built-in circuit breaker)
Speed Settings	3 (Low, Medium, High)
Control Type	Rotary Knob
Tilt Adjustment	Yes, manual tilt
Plug Type	3-prong grounded plug
Safety Features	10-amp circuit breaker, safety grille
Recommended Use	Residential indoor use only
Cleaning Method	Vacuum with brush attachment; soft cloth for body
Lubrication	Permanent lubrication, no oiling required
Warranty	1-year limited warranty (USA, its territories, and Canada only)
Customer Service	[phone], Monday-Friday 8AM-5PM EST
Not Suitable For	Agricultural facilities, hazardous locations, outdoor use
Breaker Reset	Press reset button adjacent to outlets after tripping

Frequently Asked Questions - X-Blower X12904 Lasko

How do I clean the Lasko X-Blower X12904 fan?

Always unplug the fan before cleaning. Use a vacuum cleaner with a brush attachment to remove dust and lint from inside the fan grille and body. Wipe the exterior with a soft, damp cloth. Never use alcohol, gasoline, or harsh solvents.

What should I do if my fan stops working and won't turn on?

First, check that the power cord is securely plugged into a working 120V outlet. If the fan still doesn't work, the built-in 10-amp circuit breaker may have tripped. Unplug the fan, wait a moment, then press the reset button located near the outlet on the fan. Plug it back in and try again.

Can I use this fan outdoors?

No, the Lasko X-Blower X12904 is designed for residential indoor use only. Do not use it outdoors, near water, or in wet locations such as bathrooms, pools, or hot tubs, as this creates a shock hazard.

What type of extension cord can I use with this fan?

Lasko advises avoiding extension cords, power strips, or power taps, as they may overheat and cause a fire hazard. If you must use an extension cord, use a heavy-duty cord rated for at least 10 amps and keep it as short as possible. However, the manufacturer strongly recommends plugging directly into a wall outlet.

Does the fan have a warranty and how do I claim it?

Yes, the fan comes with a 1-year limited warranty for the original purchaser in the USA, its territories, and Canada. To claim, contact Lasko Customer Service at [phone] to obtain a Return Authorization (RA) number. Return the product with proof of purchase at your expense. The warranty covers defects in workmanship and materials, but not damage from misuse or unauthorized repairs.

How do I adjust the angle of the fan?

The fan body can be tilted forward or backward manually. Simply rotate the fan body to your desired position. There is no lock mechanism; it stays in place by friction.

Can I use this fan in a workshop or garage?

Yes, as long as the area is dry and indoor. However, the fan is not suitable for locations where flammable liquids or vapors are present (e.g., paint, gasoline, solvents). Always follow safety instructions regarding hazardous environments.

What are the speed settings and how do I change them?

The fan has three speeds: Low (1), Medium (2), and High (3). Turn the knob on the side of the fan to select the desired speed. Position 0 turns the fan off.

Does the fan come with a remote control?

The manual does not mention a remote control. The Lasko X-Blower X12904 is manually operated via a rotary knob and tilt adjustment, with no remote control included.

How do I reset the circuit breaker on the fan?

If the fan stops working due to overcurrent, unplug it from the outlet. Locate the reset button on the fan (adjacent to the outlets, as shown in the manual). Press the button firmly until it clicks, then plug the fan back in. The fan should resume normal operation.

USER MANUAL X-Blower X12904 Lasko

This Fan is for residential use only.

It is not intended to be used in commercial, industrial or agricultural settings.

Register Your Product Today

www.lasko.com/product-registration

You will benefit from:

Efficient and enhanced support

Future product updates

Scan with a smart phone

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

Have a Question? Need a Part?

Please Do Not Return Product to Store!

Contact Lasko Customer Service:

[phone] Monday-Friday 8AM - 5PM EST.

(VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)

WARNING

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, these instructions and warnings should always be followed to reduce the risk of fire, electrical shock and injury to persons:

Read all instructions before using this Fan.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:

DO NOT use this Fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints, gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the containers for these products!

ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this condition should be replaced by a qualified electrician.

ALWAYS unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and unplug the Fan when not in use.

BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source. The power cord is equipped with a three-prong grounded plug that must be inserted into a matching receptacle. Under no circumstances should the grounding prong be cut off the plug. Where a two-prong wall receptacle is encountered, it must be replaced with a properly grounded three-prong receptacle installed in accordance with the National Electrical Code (NEC) and all applicable local codes and ordinances. This work must be done only by a qualified electrician, using copper wire only. DO NOT USE A THREE-PRONG TO TWO-PRONG ADAPTER. IMPROPER CONNECTION MAY CREATE THE RISK OF ELECTRICAL SHOCK. USE OF SUCH ADAPTERS IS NOT PERMITTED IN CANADA.

CAUTION

- AVOID the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these devices may overheat and cause a fire hazard.

• DO NOT route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat cresting a fire hazard.

- ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.

- NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur. - DO NOT block cover or obstruct air flow to or from the Fan while in operation.

- DO NOT use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location may create a shock hazard.

- DO NOT run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

- NEVER use a single extension cord to operate more than one Fan or other electrical device.

- DO NOT use this Fan if it has been damaged or is not functioning properly. - Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Fan. If this occurs, move the Fan to another location.

- Keep Fan remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Fan. - THIS Fan DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008). This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.

- THIS Fan DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008). This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements for hazardous locations.

NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and making it difficult to avoid interference. The equipment also allows for use to perform its own signal transmission (e.g., the system's power line, the circuit lines, or other antennas). Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The user is cautioned that charges and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment.

SAVE THESE INSTRUCTIONS

NEW 10/18 2 X12900ES

MODELO X12900

FUNCIONAMIENTO

Six identical mechanical component diagrams arranged in a 2x2 grid, each with directional arrows indicating movement or force (no text or symbols)

NEW 10/18 7 X12900ES

ADVERTENCIA

1. Carefully remove the Fan from the plastic bag and the carton.
2. Place the Fan on a firm and level surface.

CAUTION: Plastic or rubber tabs, like the feet on this unit, may stick to furniture surfaces and/or hardwood floors. The unit may leave a residue that could darken, stain or leave permanent blemishes on the finish of certain furniture surfaces, including wood surfaces, and/or hardwood floors.

1. Plug the cord set into a 120 volt outlet.

⚠ WARNING Be sure that the plug fits tightly into outlet.

When plugs fit loosely into receptacles, they may slip partially or completely out of the receptacle with only the slight movement of the attached cord. Receptacles in this condition may overheat and pose a serious fire hazard; if covered by a curtain or drape, the fire hazard is even greater.

1. Turn the Fan on by selecting the desired speed with the knob on the side of the Fan, (Figure 1)

0 - Off

1 - Low

2 - Medium

3 - High

Figure 1

1. To adjust angle, rotate the Fan body forward or backward to the desired position. (Figure 2)

2. To turn the Fan OFF, turn the knob to OFF (0) and unplug the unit from the electrical outlet.

Breaker Reset:

A 10-amp breaker is provided as a safety feature of your Blower Fan. When you use an appliance that has more amperage than allowed, the breaker will trip. To reset, unplug the appliance causing the breaker to trip and push the Reset Button adjacent to the outlets on the Fan. (Figure 3)

Figure 3

Figure 2

NEW 10/16 3 X12900ES

MODEL X12900

MAINTENANCE

⚠ WARNING

To reduce the risk of electrical shock and fire please observe the following instructions:

- Always unplug the cord before moving, servicing or cleaning.

- NEVER place the Fan in or near water.

- Clean the Fan only with a vacuum equipped with a brush attachment: the vacuum will remove the lint

and dirt from inside the Fan.

- NEVER attempt to take apart the Fan

- Clean the body of the Fan with a soft cloth only

- NEVER use ALCOHOL or SOL VENTS such as gasoline, benzene, paint thinner, or other harsh cleaners.

TROUBLE SHOOTING TIPS

If your Fan fails to operate, see below for a probable cause and solution:

Be sure the power cord is plugged into a working electrical outlet.

If you have a problem that can not be resolved by the steps listed above, contact Technical Assistance at [phone], Monday through Friday, between the hours of 8:00 a.m. and 5:00 p.m. Eastern.

SERVICING: For servicing, other than general user maintenance, please contact Customer Service at [phone], Monday through Friday, from 8am-5pm Eastern.

STORAGE: Store the Fan with these instructions, in the original carton in a cool, dry place.

LUBRICATION: Motor is permanently lubricated.

DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible disposal of this product, contact your local waste service provider or visit www.1600recycling.com ^2 .

LASKO PRODUCTS, LLC LIMITED WARRANTY (VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)

WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.

HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.

WHAT LASKO WILL DO: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC at customer expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return Authorization ("RA"). DO NOT return products without an RA or the warranty claim will not be processed.

WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damages, abuse, misuse, unauthorized repairs made or affused. This warranty does not cover shipping costs for the room to be sold or repurchased or replacement (Lasko's) by mail return shipping charges from the sale of shipping warranties and/or equipment. ANY USD ALL WARRANTIES, EXPRESSIONS, INSCRITORS, ISSUPLACEMENT, UNIFIED WITHOUT ANY IMPLIED WARRANTY OF (NOTY OF MERCANITABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURDS AND IN NO EVENT SHALL LASKO'S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES. CIRCUIT BREAKERS FOR RECEPTACLES, NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL LASKO'S LIABILITY FOR ANY OTHER THAN 20% OF THE TAXES OF THIS WARRANTY. THIS WARRANTY PROCESSED IN THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.

Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province.

Proof of purchase is required before a warranty claim will be accepted.

CUSTOMER SERVICE:

Toll-Free [phone]. Email: [e-mail]

Our Customer Service team is available to assist you with product and service questions, and replacement parts. They can be

reached Monday through Friday, 8am-5pm Eastern. Please have your model number available, as well as the type and style

(located on the underside of your product).

Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380

(Please do not send product to this location) www.lasko.com

Manual printed in China

INSTRUCCIONES IMPORTANTES - MANUAL DE USO

Lasko®

XBlower

www.lasko.com/product-registration