45GTC - Ceiling fan KDK - Free user manual and instructions

Product Type	Ceiling Fan
Brand	KDK
Model	45GTC
Blade Span	45 inches (114 cm)
Number of Blades	5
Motor Type	AC Induction Motor
Speed Settings	3 (Low, Medium, High)
Reverse Function	Yes (Summer/Winter Mode)
Control Type	Pull Chain and Remote Control
Remote Control Included	Yes
Light Kit	Not Included (Optional)
Power Supply	AC 220-240V, 50Hz
Power Consumption	60W (Typical)
Airflow Capacity	6,500 CFM (Approx.)
Noise Level	≤ 50 dB
Weight	6.5 kg (14.3 lbs)
Ceiling Mount Type	Downrod Mount (Standard)
Compatible Slope Ceiling	Up to 15°
Material	Metal and ABS Plastic
Blade Material	Engineered Wood Composite
Safety Certification	CE, RoHS
Maintenance	Wipe with damp cloth; no harsh chemicals
Spare Parts Availability	Blades, motor, remote, pull chain switch
Repair Service	Authorized service centers; user manual for DIY
Warranty	2 Years (Motor: 10 Years)

Frequently Asked Questions - 45GTC KDK

How do I install the KDK 45GTC ceiling fan?

Installation should be performed by a qualified electrician. Ensure the power is off at the circuit breaker. Mount the fan bracket securely to a ceiling joist using the provided hardware. Attach the fan motor assembly, then install the blades. Connect wiring according to the included diagram, matching colors. Finally, install the canopy and test operation.

Can I use this fan on a sloped ceiling?

Yes, the KDK 45GTC is compatible with sloped ceilings up to 15 degrees. Use the standard downrod mount; no additional kit required.

How do I reverse the fan direction?

Use the remote control or pull chain to reverse the fan direction. Press the 'Reverse' button on the remote or toggle the slide switch on the motor housing. In summer, set counterclockwise for a downdraft; in winter, clockwise for updraft to circulate warm air.

How do I clean and maintain the fan?

Turn off the fan and wait for blades to stop. Use a soft, damp cloth to wipe the blades and motor housing. Do not use abrasive cleaners or water directly on the motor. Periodically check and tighten screws.

What should I do if the fan is wobbling?

Ensure fan is properly balanced. Check that all blade screws are tight and blades are aligned. Use the provided balancing kit (if included) or adjust blade positions. If wobble persists, check the ceiling mount for security.

Does the fan come with a light kit?

No, the KDK 45GTC does not include a light kit. However, it may be compatible with optional light kits sold separately. Check the user manual for compatible models.

What is the power consumption of this fan?

The typical power consumption is approximately 60 watts at high speed, making it energy efficient.

Can I control the fan with a wall switch?

Yes, the fan can be controlled with a standard wall switch for power on/off. The speed and reverse functions are operated via the pull chain or remote control.

How do I replace the remote control battery?

Open the battery compartment on the remote (usually at the back). Replace with a CR2032 or similar 3V lithium battery, ensuring correct polarity. Dispose of old battery properly.

What warranty does this fan have?

The KDK 45GTC comes with a 2-year limited warranty on the whole unit and a 10-year warranty on the motor. Contact KDK service center for claims.

USER MANUAL 45GTC KDK

KDK Company, Division of PES

Head Office : 4017, Takaki-cho, Kasugai, Aichi, Japan

Printed in Japan

Impreso en el Japón

พิมพ์ที่อยู่ปน

proble في الابان

45GSC 60GTC

The quick brown fox jumps over the lazy dog.

INSTALLATION CAUTIONS

PRECAUCIONES A TOMARSE AL HACER LA INSTALACION

In The Kingdom of Saudi Arabia, this Ian is to be installed so that the blades are more than 2.3m above the floor in compliance with Saudi Arabian standard.

[25GSC, 30GSC, 35GSC]

[40GSC, 45GSC, 50GSC, 60GSC 45GTC, 50GTC, 60GTC]

1	Frame	Armazón	###	الإNPAR
2	Nut	Tuerca	###	###
3	Motor	Motor	###	###
4	Motor support	Soporte del motor	###	###
5	Blade	Cuchilla	###	###
6	Power cord	Cordón de la corriente	###	###
7	Fitting hole 8	Agujero de montaje 8	###	###
8	Fitting hole 4	Agujero de montaje 4	###	###

Model Modeloالنوبيل	A	B	C	D	E	F	G	H
25GSC	327	298	165	—	171	10 dia.	—	250 dia.
30GSC	378	349	210	—	200	10 dia.	—	300 dia.
35GSC	467	434	250	—	236	12 dia.	—	350 dia.
40GSC	518	485	280	460	274	12 dia.	12 dia.	400 dia.
45GSC	570	540	320	—	297	12 dia.	—	450 dia.
50GSC	659	620	355	560	315	15 dia.	15 dia.	500 dia.
60GSC	760	720	400	650	320	15 dia.	15 dia.	620 dia.
45GTC	570	540	320	—	297	12 dia.	—	450 dia.
50GTC	659	620	355	560	304	15 dia.	15 dia.	500 dia.
60GTC	760	720	400	650	320	15 dia.	15 dia.	620 dia.

During installation and carrying work, take special care not to deform the blade. If the blade is deformed, troubles such as unbalance or vibration may occur.

[25GSC, 30GSC, 35GSC]
[40GSC, 45GSC, 50GSC, 60GSC, 45GTC, 50GTC, 60GTC]

[25GSC, 30GSC, 35GSC]

1. Loosen the blade setscrew to remove the blade.

2. Afloje el tornillo de sujeción de cuchilla para remover la cuchilla.

3. ٤٠٣٥٢٠٤١٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥

4. Remove the wiring cover setscrew and exchange the yellow and red wires according to the wiring diagram.

5. Remueva el tornillo de la cubierta de alambrado y efectue el intercambio de los alambres amarillo y rojo de acuerdo con el diagrama de alambrado. Después de esto, vuelva a instalar la cubierta de alambrado en la posición original.

6. กองทะบุตวะรุพของตลับสายไฟแล้วดับเปลี่ยนสายไฟสีเหลืองกับสีแดงตามภาพอธิบายการเดินสายไฟ

7. أَنْزَعْ بِرْغَي تُفْبِتْ غطاء أَسْلَكَ الْتَوْصِيلِ وَبِدَلِ الْأَسْلَكَ الصفراء وَالخمراء قِبما بِنْهَا طَبْقَا لِلَّرِسمِ النَخَطْبِطِي لُنْوَصِيلِ الْأَسْلَكَ.

[40GSC, 45GSC, 50GSC, 60GSC]

1. Loosen the hexagonal nut to remove the blade. (For 40GSC. Loosen the blade setscrew)
2. Afloje la tuerca hexagonal para remover la cuchilla. (Para 40GSC, afloje el tornillo de sujeción de la cuchilla)
3. ไขตะบูเกลียวหัวใหญ่เพื่อถอดใบพัต (สำหรับ 40GSC ไขตะบูทางชุดของใบพัต)
   . . فك الصمولة السداسية و ذلك لنزع ريشة المروحة. (للموديل 40GSC، فلك برفي ثنيست الريشه).
4. Remove the two (2) wiring box setscrews and exchange the yellow and red wires according to the wiring diagram. After exchanging, re-install the wiring box in its original position.
5. Remueva los dos (2) tornillos de la caja de alambrado y cambie los alambres amarillo y rojo uno con el otro de acuerdo con el diagrama de alambrado. Después de esto, vuelva a instalar la caja de alambrado en la posición original.

6. ดอตะบุควชุด 2 ตัวของหลับสายไฟออก แล้วดับเปลี่ยนสายไฟสิเหลืองกับจีแดงตามภาพอธิบายการเดินสายไฟหลังจากสับเปลี่ยนแล้วอิตดลัยสายไฟเข้าไปในตําแหน่งเติม

7. أسرغ بргيئى (١) تثبیت صندوق أسلاک التوصیل نُم بدل الأسلام Pharmaceuticals و الحمراء فيه ينها و ذلك حسب مخطط alsلات التوصیل ب Equipment ذلك، أحمد تركیب صندوق أسلاک التوصیل إلى مکانه الأصلی

8. Mount the blade in reverse position and tighten securely with the hexagonal nut.

9. Instale la cuchilla en la posición inversa y apriétela completamente con la tuerca hexagonal.
10. ยกใบพัตกลับตําแหนดและยืดไหผนตามวยตร์เกลี่ยวหัวใหญ่

Wiring Diagram

[45GTC, 50GTC, 60GTC]

1. Reverse two of the three wires for the power supply.
2. Invierta dos de los tres alambres de la fuente de alimentación

3. ล้อสายไฟ 2 สายในรํานวน 3 สายเพื่อให้จ่ายกําลังไฟฟ้า

4. أعكس سلكين من الأسلامك الثالثة لترتيب الطاقة

If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.