50GTC - Household Fan KDK - Free user manual and instructions

Product Type	Domestic Fan
Model	50GTC
Brand	KDK
Fan Diameter	50 cm (20 inches)
Height (Adjustable)	110–140 cm
Weight	Approx. 5.5 kg
Power Supply	220–240 V ~ 50/60 Hz
Power Consumption	50 W
Speed Settings	3 speeds (Low, Medium, High)
Oscillation	Yes, wide-angle oscillation
Tilt Adjustment	Yes, adjustable tilt angle
Control Type	Manual push buttons
Safety Features	Overheat protection, safety fuse
Care and Cleaning	Wipe with soft dry cloth; do not use water
Spare Parts Available	Blades, grille, motor assembly
Repairability	Replacement parts available for DIY repair
Noise Level	Approx. 45–55 dB
Certifications	CE, RoHS

Frequently Asked Questions - 50GTC KDK

How do I clean the fan?

Unplug the fan and use a soft, dry cloth to wipe the grille, blades, and body. Do not use water or liquid cleaners to avoid damage.

Can I adjust the fan height?

Yes, the fan has an adjustable stand. Loosen the height adjustment collar, set to desired height, and tighten securely.

Does the fan oscillate?

Yes, the KDK 50GTC features wide-angle oscillation to distribute air effectively across the room.

What is the power consumption?

The fan consumes approximately 50 watts on high speed, making it energy-efficient.

How many speed settings are available?

There are 3 speed settings: Low, Medium, and High, controlled by push buttons.

Is assembly required?

Some assembly is required. The base, stand, and fan head need to be assembled using the included screws and tools as per the manual.

Can I replace the blades myself?

Yes, replacement blades are available. Disconnect power and remove the grille to access the blade nut. Replace with compatible KDK blades.

What should I do if the fan stops working?

Check the power cord and plug, ensure the socket is live. If the fan overheats, it may have tripped the thermal fuse; wait for it to cool and reset. If problem persists, contact support.

Is the fan safe for use in damp areas?

No, this fan is designed for indoor use only. Keep away from water, bathrooms, or outdoor environments to avoid electrical hazards.

What is the warranty period?

KDK typically offers a 1-year warranty against manufacturing defects. Retain your purchase receipt for warranty claims.

USER MANUAL 50GTC KDK

KDK Company, Division of PES

Head Office : 4017, Takaki-cho, Kasugai, Aichi, Japan

Printed in Japan

Impreso en el Japón

พิมพ์ที่อยู่ปน

proble في الابان

45GSC 60GTC

•

INSTALLATION CAUTIONS

PRECAUCIONES A TOMARSE AL HACER LA INSTALACION

In The Kingdom of Saudi Arabia, this Ian is to be installed so that the blades are more than 2.3m above the floor in compliance with Saudi Arabian standard.

[25GSC, 30GSC, 35GSC]

[40GSC, 45GSC, 50GSC, 60GSC 45GTC, 50GTC, 60GTC]

1	Frame	Armazón	###	الإNPAR
2	Nut	Tuerca	###	###
3	Motor	Motor	###	###
4	Motor support	Soporte del motor	###	###
5	Blade	Cuchilla	###	###
6	Power cord	Cordón de la corriente	###	###
7	Fitting hole 8	Agujero de montaje 8	###	###
8	Fitting hole 4	Agujero de montaje 4	###	###

Model Modeloالنوبيل	A	B	C	D	E	F	G	H
25GSC	327	298	165	—	171	10 dia.	—	250 dia.
30GSC	378	349	210	—	200	10 dia.	—	300 dia.
35GSC	467	434	250	—	236	12 dia.	—	350 dia.
40GSC	518	485	280	460	274	12 dia.	12 dia.	400 dia.
45GSC	570	540	320	—	297	12 dia.	—	450 dia.
50GSC	659	620	355	560	315	15 dia.	15 dia.	500 dia.
60GSC	760	720	400	650	320	15 dia.	15 dia.	620 dia.
45GTC	570	540	320	—	297	12 dia.	—	450 dia.
50GTC	659	620	355	560	304	15 dia.	15 dia.	500 dia.
60GTC	760	720	400	650	320	15 dia.	15 dia.	620 dia.

During installation and carrying work, take special care not to deform the blade. If the blade is deformed, troubles such as unbalance or vibration may occur.

[25GSC, 30GSC, 35GSC]

1. Loosen the blade setscrew to remove the blade.

2. Afloje el tornillo de sujeción de cuchilla para remover la cuchilla.

3. ٤٠٣٥٢٠٤١٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥٣٥

4. Remove the wiring cover setscrew and exchange the yellow and red wires according to the wiring diagram.

5. Remueva el tornillo de la cubierta de alambrado y efectue el intercambio de los alambres amarillo y rojo de acuerdo con el diagrama de alambrado. Después de esto, vuelva a instalar la cubierta de alambrado en la posición original.

6. กองทะบุตวะรุพของตลับสายไฟแล้วดับเปลี่ยนสายไฟสีเหลืองกับสีแดงตามภาพอธิบายการเดินสายไฟ

7. أَنْزَعْ بِرْغَي تُفْبِتْ غطاء أَسْلَكَ الْتَوْصِيلِ وَبِدَلِ الْأَسْلَكَ الصفراء وَالخمراء قِبما بِنْهَا طَبْقَا لِلَّرِسمِ النَخَطْبِطِي لُنْوَصِيلِ الْأَسْلَكَ.

graph TD
    A["Motor Motor, fuel supply"] --> B["①"]
    A --> C["②"]
    A --> D["③"]
    A --> E["④"]
    A --> F["⑤"]
    B --> G["Power supply: Fuente de alimentación (Exhaust), (Evacuación), (airway)"]
    C --> H["Electricity: Air intake, (Air intake) and (airway)"]
    D --> I["Electricity: Air intake, (Air intake) and (airway)"]
    E --> J["Electricity: Air intake, (Air intake) and (airway)"]
    F --> K["Electricity: Air intake, (Air intake) and (airway)"]

[40GSC, 45GSC, 50GSC, 60GSC]

1. Loosen the hexagonal nut to remove the blade. (For 40GSC. Loosen the blade setscrew)
2. Afloje la tuerca hexagonal para remover la cuchilla. (Para 40GSC, afloje el tornillo de sujeción de la cuchilla)
3. ไขตะบูเกลียวหัวใหญ่เพื่อถอดใบพัต (สำหรับ 40GSC ไขตะบูทางชุดของใบพัต)
   . . فك الصمولة السداسية و ذلك لنزع ريشة المروحة. (للموديل 40GSC، فلك برفي ثنيست الريشه).
4. Remove the two (2) wiring box setscrews and exchange the yellow and red wires according to the wiring diagram. After exchanging, re-install the wiring box in its original position.
5. Remueva los dos (2) tornillos de la caja de alambrado y cambie los alambres amarillo y rojo uno con el otro de acuerdo con el diagrama de alambrado. Después de esto, vuelva a instalar la caja de alambrado en la posición original.

6. ดอตะบุควชุด 2 ตัวของหลับสายไฟออก แล้วดับเปลี่ยนสายไฟ สิเหลืองกับจีแดงตามภาพอธิบายการเดินสายไฟหลังจากสับเปลี่ยน แล้วอิตดลัยสายไฟเข้าไปในตําแหน่งเติม

7. أسرغ بргيئى (١) تثبیت صندوق أسلاک التوصیل نُم بدل الأسلام Pharmaceuticals و الحمراء فيه ينها و ذلك حسب مخطط åسلات التوصیل ب Equipment ذلك، أحمد تركیب صندوق أسلاک التوصیل إلى مکانه الأصلی

8. Mount the blade in reverse position and tighten securely with the hexagonal nut.

9. Instale la cuchilla en la posición inversa y apriétela completamente con la tuerca hexagonal.
10. ยกใบพัตกลับตําแหนดและยืดไหผนตามวยตร์เกลี่ยวหัวใหญ่

Wiring Diagram

[45GTC, 50GTC, 60GTC]

1. Reverse two of the three wires for the power supply.
2. Invierta dos de los tres alambres de la fuente de alimentación

3. ล้อสายไฟ 2 สายในรํานวน 3 สายเพื่อให้จ่ายกําลังไฟฟ้า

4. أعكس سلكين من الأسلامك الثالثة لترتيب الطاقة

If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.