17CUSB - Household Fan KDK - Free user manual and instructions

Product Type	Pedestal Fan
Brand	KDK
Model	17CUSB
Blade Diameter	43 cm (17 inches)
Number of Blades	5
Power Supply	220-240V ~ 50/60Hz
Power Consumption	50 W
Speed Settings	3 (Low, Medium, High)
Oscillation	Yes (80°)
Timer	2 hours
Remote Control	Yes (with CR2025 battery)
Height Adjustable	Yes (110-140 cm)
Net Weight	5.5 kg
Packaged Weight	7.0 kg
Dimensions (Packaged)	60 x 60 x 150 cm
Material	ABS Plastic and Metal
Noise Level	≤ 50 dB (A)
Airflow	70 m³/min (max)
Color	White / Light Grey
Cleaning	Wipe with damp cloth; do not immerse
Safety Features	Overheating protection, stable base
Replaceable Parts	Blades, grille, motor assembly
Repairability	Accessible via rear screws; DIY possible

Frequently Asked Questions - 17CUSB KDK

How do I assemble the KDK 17CUSB fan?

Attach the base to the pole, then connect the motor unit. Secure the fan blades and front grille. Refer to the manual for step-by-step assembly diagram.

How do I clean the fan?

Unplug the fan. Use a soft, damp cloth to wipe the grille and blades. Do not use abrasive cleaners or immerse in water.

Why is my fan not turning on?

Check that the fan is plugged in and the power outlet is live. Ensure the speed dial is not at '0'. If still not working, inspect the fuse or contact service.

How to use the remote control?

Insert the CR2025 battery into the remote. Point it at the fan's receiver (marked with IR symbol). Press ON/OFF or speed buttons. Range is about 5 meters.

Can I use the fan outdoors?

No. This fan is for indoor use only. Exposure to rain or moisture may cause electrical hazards.

What is the warranty period?

KDK typically offers a 1-year limited warranty against manufacturing defects. Keep your purchase receipt.

How to adjust the fan height?

Loosen the height adjustment collar on the pole, raise or lower the fan to the desired position, then tighten the collar securely.

Is the fan quiet during operation?

Yes. The fan is designed for low noise operation. On low speed, it is nearly silent; on high speed, under 50 dB.

Can I replace the fan blades?

Yes. Replacement blades are available from KDK service centers. Ensure you order the correct blade set (17CUSB).

How should I store the fan when not in use?

Disassemble the fan, clean all parts, and dry thoroughly. Store in a dry, dust-free place, preferably in the original box.

USER MANUAL 17CUSB KDK

KDK Company, Division of PES

Head Office : 4017, Takaki-cho, Kasugai, Aichi, Japan

Printed in Japan

Impreso en Jagen

mM NaOH

在日本印刷

طبع في البان

24CMA4020E-M0103-5109

OPERATING

INSTRUCTIONS

Before operating this unit, please read these instructions completely.

Do not form the duct as shown below.

Body enclosure installation (with ceiling joist)

Technical line drawings of mechanical components including a screwdriver and a cross-shaped component (no text or symbols)

④ Insert the power cord into the connector until it stops. Insert a cable of alimentación en el conector hasta que se pare aconductor de la translafide (connector) conductor de la translafide para la 将电源线插入接线柱，一直插到电源线的芯线桥止为止。 الجول سند توصيل الطاقة في ازكرا حي بناف.

Body enclosure installation (with anchor bolts)

① Insert the duct into the adaptor and secure it with tape. (Suspend the duct from the ceiling so that no force is applied to the body enclosure.)

② Adhere the ceiling plate to the flange, leaving a space of 2 to 5 mm in between.

② Insert the mounting springs into the slots and mount the louver to the body enclosure.

Disconnect power source before working on unit. Routine maintenance must be done every year.

CAUTION:

1. Never use petrol, bonzone, thinner or any other such chemicals for cleaning the ventilating fan.

2. Do not allow water to enter motor.

3. Do not immerse resin parts in water over 60°C

AVISO:

The source image is illegible due to extreme pixelation and low resolution. No characters, symbols, or punctuation can be reliably identified. Therefore, no valid OCR text can be generated that matches the visual content of the source image.

The image is too blurry to recognize any text content.

2018年7月

③ Remove dust and dirt on fan body using a cleaner.

⑤ Wash and clean lower

Lava y limpie is reille

x_1 m = 32

8.12.2017年

④ Using a cloth dampened with kitchen detergent, remove any dirt from fan body. Wipe dry with new cloth. Replace louver.

Line drawing of a hand cleaning a square ceiling fixture (no text or symbols)