Luxus L4D-20TLA - Coffee maker Fetco - Free user manual and instructions

Product Type	Coffee Maker
Brand	Fetco
Model	Luxus L4D-20TLA
Dimensions (W x D x H)	450 x 350 x 400 mm
Weight	15 kg
Power Supply	220-240 V, 50/60 Hz, 1500 W
Brewing Capacity	20 cups (approx. 1.8 L)
Water Tank Capacity	2.0 L removable
Pump Pressure	19 bar
Heating System	Thermoblock stainless steel
Programmable Functions	Timer, auto shut-off, temperature control
Grinder	Built-in conical burr grinder, adjustable coarseness
Milk Frothing	Steam wand with automatic frothing
Water Filtration	Integrated water filter
Control Panel	Digital display with touch controls
Maintenance & Cleaning	Descaling program, removable drip tray, cleaning cycle
Safety Features	Auto shut-off, overheat protection, child lock
Spare Parts & Repairability	Replacement parts available, user-serviceable components
General Information	Energy efficiency class A, noise level ≤ 65 dB

Frequently Asked Questions - Luxus L4D-20TLA Fetco

How do I descale the coffee maker?

Use a descaling solution or a mixture of water and vinegar. Run the descaling program from the menu, then rinse with clean water.

What type of coffee beans can I use?

We recommend using whole bean coffee. Avoid oily or flavored beans to prevent clogging the grinder.

How do I adjust the grind size?

Turn the grind adjustment dial located inside the bean hopper. A finer grind for espresso, coarser for drip coffee.

Why is my coffee not hot enough?

Check the temperature setting in the menu. Also ensure the machine is preheated and cups are warm.

How often should I clean the steam wand?

After each use, purge the wand with steam and wipe with a damp cloth. Deep clean weekly.

Can I use ground coffee instead of beans?

Yes, use the bypass chute on the top. Do not overfill; use only the recommended amount.

What does the error message 'E01' mean?

This indicates a water shortage. Fill the water tank and ensure it is properly seated.

How do I reset the water filter indicator?

Hold the filter button for 3 seconds until the light turns off, then replace the filter.

Is the coffee maker energy efficient?

Yes, it has an energy-saving mode that activates after 30 minutes of inactivity.

Where can I find spare parts?

Spare parts are available on the Fetco website or through authorized dealers. Use only genuine parts.

USER MANUAL Luxus L4D-20TLA Fetco

LUXUS® LGD and LGS Thermal Dispensers & Servers

Exterior view of a modern stainless steel portable heater with black and silver casing (no visible text or symbols)

LGS-10

Exterior view of a modern stainless steel and black portable heater (no text or symbols visible)

LGS15

Exterior view of a modern stainless steel and black portable water heater (no visible text or symbols)

1.0 gallon 1.5 gallon 2.0 gallon

FEATURES

• Stainless steel vacuum insulated liner
• Proven heat retention without power
• Nonelectrical construction: cannot scorch
- Portable and beautiful styling: Matches other FETCO equipment
• FETCO simplified brew-through lid design
- New, larger faucet
- Removable and washable drip tray
- Sight tube, with protective guard
• Fits most brewers, servers fit all L Series FETCO Stands
- Many accessories and spare parts are interchangeable

Contact Information

FETCO®

Food Equipment Technologies Company

600 Rose Road

Lake Zurich • IL • 60047-1560 • USA

©2018-9 Food Equipment Technologies Company

fetco.com

Internet: www.fetco.com

Phone: [phone] (US & Canada)

[phone]

Fax: [phone]

Email: [e-mail]

[e-mail] P182 February 2019

Illustration of medical devices including a mobile phone, a pen, and a cup with a downward arrow (no text or symbols)

FETCO LGD & LGS LUXUS DISPENSER MASTER REPLACEMENT PARTS LIST

Ref	QTY	Description	Dispenser Model Number
			LGD10 & LGS10	LGD15 & LGS15	LGD20 & LGS20
1	1	TOP COVER 1102.00417.00	1102.00418.00	1102.00418.00
2 1	HANDLE WITH HARDWARE 1000.00111.00 1000.00112.00 1000.00112.00
3	1	COVER FUNNEL 1102.00408.00	1102.00416.00	1102.00416.00
4	1	FLIP-LID 1023.00310.00 1023.00310.00	1023.00310.00
5	1	COVER CUP 1023.00319.00	1023.00319.00	1023.00319.00
6	1	BOTTOM COVER 1023.00311.00	1023.00326.00	1023.00326.00
7	1	NECK GASKET	1024.00070.00	1024.00070.00	1024.
8	1	COMPLETE FAUCET, LGD/LGS	1102.00409.00	1102.00409.00	1102.00409.00
8A	1	FAUCET O-RING	1024.00028.00	1024.00028.00	1024.00028.00
8B	1	FAUCET BUSHING	1023.00057.00	1023.00057.00	1023.00057.00
9 1	COMPLETE FAUCET UPPER ASSEMBLY 1102.00407.00 1102.00407.00
10	1	FAUCET SEAT CUP	1071.00013.00	1071.00013.00	1071.00013.00
11	1	HANDLE	1023.00323.00	1023.00323.00	1023.00323.00
12	1	FAUCET LOCK	1023.00321.00	1023.00321.00	1023.00321.00
13	1	BOTTOM INSERT	1023.00322.00	1023.00322.00	1023.00322.00
13A	2	SCREW, FLAT HD. PHIL. T/F, #8-18X1/2"	1082.00045.00	1082.00045.00	1082.00045.00
14	1	SIGHT TUBE COVER	1023.00314.00	1023.00327.00	1023.00328.00
15A	1	UPPER SIGHT TUBE WASHER	1024.00033.00	1024.00033.00	1024.00033.00
15B	2	LOWER SIGHT TUBE O-RINGS	1024.00105.00	1024.00105.00	1024.00105.00
16	1	SIGHT TUBE CAP	1071.00024.00	1071.00024.00	1071.00024.00
17	1	SIGHT TUBE HOUSING SUPPORT	1102.00405.00	1102.00405.00	1102.00405.00
18A	1	SCREW, #8-32 X 3/8"LG, P/H phil., mach.	1082.00023.00	1082.00023.00	1082.00023.00
18B	1	LOCK WASHER, #8 SCREW, INT. TOOTH	1083.00011.00	1083.00011.00	1083.00011.00
19	1	SIGHT TUBE	1021.00013.01	1021.00013.02	1021.00013.03
20	1	DRIP TRAY ASSEMBLY	1000.00013.00	1000.00014.00	1000.00014.00
21	1	FAUCET GUARD	1023.00313.00	1023.00313.00	1023.00313.00
22	1	STAND ASSEMBLY.	1000.00015.00	1000.00016.00	1000.00016.00
23	1	ANTI-SLIP FOOT (QTY-4)	1024.00069.00	1024.00069.00	1024.00069.00
24		Stand Assy L4S-10 Single	A14700000
24		Stand Assy L4S (15 & 20) Single		A15000000	A15000000
25*		Stand Assy L4S-10 Twin	A14800000
25*	-	Stand Assy L4S (15 & 20) Twin		A15100000	A15100000
26*	-	Stand Assy L4S-10 Triple	A14900000
26*	-	Stand Assy L4S (15 & 20) Triple		A15200000	A15200000

* (NOT SHOWN)

00070.00

IMPORTANT SAFEGUARDS

• To prevent overflows, ensure dispenser is completely empty before brewing.
• Always open the flip-lid on the funnel for filling of the dispenser.
- Do not use bleach or cleaners containing chlorides.
• Use only non-metallic brushes and cleaning pads.
- Use only the handle to lift or carry the dispenser.
- Do not use the faucet guard to pull or lift the dispenser.

CLEANING AND MAINTENANCE

Do not submerge the dispenser or place in dishwasher.

Daily:

Empty all coffee or tea, remove and clean the brewers brew basket and funnel with detergent solution and rinse. Allow to air dry

Wash the drip tray and other plastic parts with dish detergent. Avoid abrasives.

To sanitize the dispenser before filling, brew a batch of water only (no coffee) into the dispenser and allow it to rest for 10 minutes. Drain and close faucet.

This is beneficial because it will also pre-heat the dispenser

Weekly, or as needed:

Use any commercial beverage urn cleaner to clean the inside of the dispenser.

We recommend URNEX. Follow the cleaner manufacturer's instructions.

Always thoroughly rinse the brew basket and dispenser after cleaning.

To access faucet and sight tube for cleaning: Follow diagrams!

Pull sight tube cover at top pull forward slightly and lift.

Remove faucet guard. Push down faucet lock. Twist and pull the faucet forward.

Remove the faucet upper assembly and inspect the seat cup for wear.

Clean or replace if necessary*

*Youtube video for how to disassemble and clean faucet upper assembly by Tomlinson®

https://www.youtube.com/watch?v=XL6jpdkMAk0

Access the sight tube by removing cover and unscrewing the top cap.

Press new sight tube over the bottom fitting O-rings when replacing.

Replace sight tube cover by inserting base, then the top prongs, and push down.

NOTE: Sight tube cover must be kept in place during operation

ACCESSING SIGHT TUBE AND FAUCET Grip sight tube cover at top, pull and lift.

Technical line drawing of a portable industrial device with control panel and side-mounted unit (no text or symbols)

REINSTALL SIGHT TUBE COVER
1) Push base forward and down.
2) Push top forward and slide guard down to lock.

ACCESSING THE FAUCET & SIGHT TUBE:

Remove sight tube cover. Pull faucet guard up and forward to remove. Push down faucet lock- twist faucet and pull off. To access sight tube: remove sight tube cap. Reinstall sight tube on barbed fitting on two O-rings (wet O-rings to assist) Replace faucet by pushing onto the tube and twisting. Secure by pushing faucet lock up and reinstall sight tube cover