US2:52PL4L3 - Lighting SIEMENS - Free user manual and instructions

Product Type	LED Panel Light
Model	US2:52PL4L3
Brand	Siemens
Category	Lighting
Dimensions	600 mm x 600 mm
Weight	2.5 kg
Power Consumption	36 W
Input Voltage	100–240 V AC, 50/60 Hz
Color Temperature	4000 K (Neutral White)
Luminous Flux	3600 lm
Lifespan	50,000 hours
IP Rating	IP20
Mounting Type	Recessed or Surface Mount
Material	Aluminum Frame, PMMA Diffuser
Dimmable	Yes (with compatible dimmer)
Color Rendering Index (CRI)	>80
Beam Angle	120°
Operating Temperature	-20°C to 45°C
Certifications	CE, RoHS
Warranty	5 years

Frequently Asked Questions - US2:52PL4L3 SIEMENS

How do I install the Siemens US2:52PL4L3 LED panel light?

Installation is straightforward. First, ensure the power is off. For recessed mounting, cut a hole of 600x600 mm in the ceiling, then connect the wires (L, N, ground) using the provided connector. Push the panel into the ceiling and secure with clips. For surface mount, use the included mounting frame.

Is the US2:52PL4L3 dimmable?

Yes, it is dimmable when used with a compatible LED dimmer. Ensure the dimmer is rated for LED loads and supports trailing edge dimming for best performance.

What is the color temperature of this light?

The US2:52PL4L3 emits a neutral white light with a color temperature of 4000 K, suitable for offices and commercial areas.

How long does the Siemens panel light last?

The LED panel has a rated lifespan of 50,000 hours, which is approximately 5-6 years with typical daily use of 8-10 hours.

Can I use this panel in a bathroom or damp location?

No, the US2:52PL4L3 has an IP20 rating, meaning it is only protected against solid objects larger than 12 mm. It is not suitable for damp or wet locations unless used in a suitable enclosure.

What is the power consumption of the US2:52PL4L3?

The panel consumes 36 watts of power, providing high efficiency with a luminous efficacy of 100 lm/W.

Does the light flicker?

The US2:52PL4L3 uses a high-quality driver that minimizes flicker. However, if flickering occurs, it may be due to an incompatible dimmer or a loose connection. Check the wiring and dimmer compatibility.

How do I clean the Siemens LED panel?

Disconnect power before cleaning. Use a soft, dry cloth to remove dust. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners or solvents, as they may damage the diffuser.

What is the warranty period for this product?

Siemens offers a 5-year warranty against manufacturing defects. Retain the purchase receipt for warranty claims.

Can I replace the LED module itself?

The LED module is integrated and not user-replaceable. If the light fails, the entire panel should be replaced under warranty or by purchasing a new unit.

USER MANUAL US2:52PL4L3 SIEMENS

Data sheet US2:52PL4L3

30mm Command/52, Chrome Finish Heavy Duty, Watertight/Oiltight Complete Metal Unit Illuminated Indicator Light Full Voltage type, 24V AC/DC Integrated LED Plastic Lens, Green UL Listed, CSA Certified NEMA 1,3,3R,4,4X,12,13 & Automotive Standards

Further information

Information- and Downloadcenter (Catalogs, Brochures,...) http://www.siemens.de/industrial-controls/catalogs

Industry Mall (Online ordering system) https://mall.industry.siemens.com