Xavax Mia 92694 - Kitchen scale

Mia 92694 - Kitchen scale Xavax - Free user manual and instructions

Find the device manual for free Mia 92694 Xavax in PDF.

📄 14 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Xavax Mia 92694 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Kitchen Scale
Brand Xavax
Model Mia 92694
Category Digital Kitchen Scale
Dimensions (Approx.) 20 x 15 x 2 cm
Weight (Approx.) 250 g
Power Supply 2 x AAA batteries (included)
Display Type LCD, backlit
Capacity 5 kg / 11 lb
Graduation 1 g / 0.1 oz
Units g, kg, lb, oz, ml (water)
Tare Function Yes
Auto-Off Yes, after 2 minutes of inactivity
Platform Material Stainless steel
Housing Material ABS plastic
Overload Protection Yes, displays error if exceeded
Cleaning Instructions Wipe with damp cloth; do not immerse
Battery Replacement User replaceable; CR2032 or AAA depending on model
Low Battery Indicator Yes
Included Accessories Batteries, user manual
Warranty 2 years

Frequently Asked Questions - Mia 92694 Xavax

How do I turn on the Xavax Mia 92694 scale?
Press the ON/OFF button. The scale will power on and display 0. If it doesn't turn on, check the batteries.
How to switch between units (g, kg, lb, oz)?
Press the UNIT button repeatedly to cycle through available units: grams, kilograms, pounds, ounces, and milliliters (for water).
How to use the tare function?
Place a container on the scale, then press the TARE button. The display will reset to zero. Add ingredients; the weight shown is net weight.
What is the maximum weight capacity?
The maximum capacity is 5 kg (11 lb). Exceeding this may damage the scale or cause inaccurate readings.
How do I clean the scale?
Wipe the surface with a damp cloth. Do not immerse the scale in water or use abrasive cleaners. Remove batteries before cleaning.
Why does the scale show 'Err' or 'O-Ld'?
This indicates overload. Remove the excess weight immediately. The scale will reset once the load is removed.
How to replace the batteries?
Open the battery compartment on the bottom. Replace with 2 x AAA batteries (or CR2032 depending on model). Observe polarity.
The display is dim or shows 'Lo'. What does it mean?
This indicates low battery. Replace the batteries with fresh ones to restore normal operation.
Does the scale automatically turn off?
Yes, the scale has an auto-off feature that activates after approximately 2 minutes of inactivity to save battery.
Can I use the scale for liquids?
Yes, in ml mode (select via UNIT button). It measures water volume based on weight. For other liquids, density may differ.

User questions about Mia 92694 Xavax

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Kitchen scale in PDF format for free! Find your manual Mia 92694 - Xavax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mia 92694 by Xavax.

USER MANUAL Mia 92694 Xavax

For the purpose of using and maintaining the kitchen scale, please read this instruction carefully before operation.

SPECIFICATIONS

  • Equipped with 4 high precision "stain-gauge" sensors and high capability CPU to ensure the weighing accuracy.
  • Capacity: 3000g
  • Division: 1g/0.1oz
  • Touch screen operation
  • Tare function
  • Auto zero-auto off
    • Low power and over load indication
    • Power: 1pc CR2032 lithium battery

OPERATION

Take out the scale, and open up the battery cover, install the battery to the battery case.

Xavax Mia 92694 - OPERATION - 1

Xavax Mia 92694 - OPERATION - 2

Xavax Mia 92694 - OPERATION - 3

WEIGHING STEP

Place the scale on the flat table, and ensure it steady.

  1. Please Touch the key of "ON/OFF" to power on, the scale will show "☐☐☐☐" for a few seconds. Then shows "0g".
  2. Touch the key "UNIT", you can chose unit "g" or "oz". (We suggest you Touch key "TARE" to make sure under 0g condition.)
  3. Under the weight state, put the object on the center of platform; the appeared final steady digits in LCD is the weight.
  4. If some thing is on the scale, you can touch the key of "TARE", LCD show "0". Clear the weight of the object. If you want to weight some more things you can repeat this function.
  5. Take out the object after all the above steps, LCD will show the object weight that before tare in negative, and at the left side of the digits you can see"-.
  6. The scale will auto power off after 5 minutes without weighing.

ERROR DISPLAY INTRODUCTION

  • When the scale is over loaded, the "EEEE" will appear on the LCD.
  • When the screen shows "☐", it means that the power isn't enough, Please change the battery as soon as possible.
  • When the screen shows "LO", it means that the Voltage isn't enough. Please change the battery.

ADVICE FOR USE AND CARE

  • The max weighing capacity of this scale is 3000g, which included the weight before tare.
  • Do not place objects on the edge of scale platform to avoid danger.
  • To ensure the life of the scale, do not put the scale under wet, hot & cold condition.
  • The product belongs to high precision electronic weighing apparatus, please do not press or drop the scale otherwise the scale is easy to damage.
  • If the scale surface is dirty, please clean the scale with soft cloth. Do not use any chemical detergent and do not let water get inside the scale.
  • The product is for family weighing only, do not use for legal trade.
  • If the result appears improperly, please check about whether the batteries and the touch point contact well.
  • Replace for new batteries if not used for a long time already, and then try again.

F

Mode d'emploi

Distributed by Hama GmbH & Co KG

D-86651 Monheim/Germany

+49 9091 502-0

www.xavax.eu

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Xavax

Model : Mia 92694

Category : Kitchen scale