IR Emitter - Infrared transmitter Extron - Free user manual and instructions

Product Type	IR Emitter
Brand	Extron
Model	IR Emitter (Uncategorized)
Compatibility	Extron controllers and switchers with IR ports
Maximum Emitters per IR Port	2
Single Emitter Installation	Connect directly to IR port
Dual Emitter Installation	Connect dual emitter cable directly to IR port
Two Single Emitters Installation	Wire in series as shown in manual
Connector Type	3.5 mm stereo mini plug (typical)
Cable Length	Approximately 6 ft (1.8 m)
Color	Black
Material	Plastic
Power Source	Powered via IR port from connected device
Dimensions (Approx)	0.5" x 0.75" x 0.25" (1.3 x 1.9 x 0.6 cm)
Weight	Not specified (negligible)
Functions	Transmits IR control signals to AV equipment
Installation Method	Plug-and-play
Application	Control of AV equipment via IR
Package Content	IR Emitter(s) - quantity depends on model
Manual Availability	Free PDF download on notice-facile.com
Technical Support	Contact Extron via phone or email (see manual)

Frequently Asked Questions - IR Emitter Extron

How many IR emitters can I connect to a single IR port on an Extron controller?

You can connect up to two IR emitters per IR port. Follow the wiring instructions in the manual.

Can I use the Extron IR Emitter with non-Extron devices?

The emitter is designed for Extron controllers and switchers. Compatibility with other devices is not guaranteed.

How do I install a dual IR emitter?

Connect the dual emitter directly to the IR port. The manual shows a diagram for dual emitter installation.

How do I install two single IR emitters?

Wire the two single emitters in series as shown in the manual.

What is the cable length of the IR Emitter?

The manual does not specify, but typical Extron IR emitters have a cable length of about 6 feet (1.8 meters).

Does the IR Emitter require external power?

No, it is powered through the IR port from the connected controller or switcher.

Can I download the user manual for free?

Yes, the manual is available for free download in PDF format on notice-facile.com.

What is the warranty on the Extron IR Emitter?

Warranty information is not provided in the manual. Please contact Extron support for details.

Is the IR Emitter compatible with all Extron switchers?

It is compatible with Extron devices that have an IR port. Refer to your device's manual for compatibility.

What do I do if the IR emitter is not working?

Check the wiring connections and ensure no more than two emitters are connected. Verify the controller's IR port is functioning. Contact Extron support if issues persist.

USER MANUAL IR Emitter Extron

Extron® IR Emitter • Installation Guide

Wiring directions depend on the number and type of IR Emitters (single or dual). Install no more than two emitters per IR port on a controller or switcher.

Installing One Single Emitter

One Single IR Emitter

Installing One Dual Emitter

Dual IR Emitter
Installing Two Single Emitters

When installing only single emitters, tie them in series as shown below.

Two Single IR Emitters

Extron USA - West - Headquarters+800.633.9876Inside USA/Canada Only+1.714.491.1500+1.714.491.1517 FAX

Extron USA - East+800.633.9876Inside USA/Canada Only+1.919.863.1794+1.919.863.1797 FAX

Extron Europe+800.3987.6673Inside Europe Only+31.33.453.4040+31.33.453.4050 FAX

Extron Asia+800.7339.8766Inside Asia Only+65.6383.4400+65.6383.4664 FAX

Extron Japan+81.3.3511.7655+81.3.3511.7656 FAX

Extron China+400.883.1568Inside China Only+86.21.3760.1568+86.21.3760.1566 FAX

Extron Middle East+971.4.2991800+971.4.2991880 FAX

68-808-01

Rev. B

06 11

© 2011 Extron Electronics. All rights reserved. www.extron.com