WMPF1E-X - Gestion de câbles réseau Panduit - Free user manual and instructions

Product Type	Surface Mount Box
Brand	Panduit
Model	WMPF1E-X
Material	PVC
Color	White
Dimensions (H x W x D)	4.5 in x 4.5 in x 2.5 in (114 mm x 114 mm x 64 mm)
Weight	0.5 lb (0.23 kg)
Mounting Type	Surface Mount
Number of Knockouts	4 (top, bottom, left, right)
Operating Temperature Range	-40°F to 185°F (-40°C to 85°C)
Flammability Rating	UL 94 V-0
IP Rating	IP54
Compatible Cable Type	CAT5e, CAT6, Coaxial, Fiber Optic
Max Cable Capacity	Up to 4 cables (depending on size)
RoHS Compliant	Yes
Application	Indoor, Telecom/Data, Electrical
Installation Tools Required	Screwdriver, drill (optional)
Warranty	5 years
Cleaning	Wipe with damp cloth, mild detergent
Includes	Box, mounting screws, cable ties

Frequently Asked Questions - WMPF1E-X Panduit

What is the Panduit WMPF1E-X used for?

The Panduit WMPF1E-X is a surface mount box designed for telecommunications and data cabling applications. It provides a secure enclosure for cable connections and terminations.

What materials is the WMPF1E-X made of?

It is made of PVC (polyvinyl chloride) which offers durability and flame retardance with a UL 94 V-0 rating.

What are the dimensions of the WMPF1E-X?

The box measures approximately 4.5 in x 4.5 in x 2.5 in (114 mm x 114 mm x 64 mm).

Can the WMPF1E-X be used outdoors?

It has an IP54 rating, meaning it is protected against dust and water splashes, but it is primarily designed for indoor use. For outdoor use, additional sealing may be required.

How many cables can fit inside the WMPF1E-X?

The capacity depends on cable size, but typically it can accommodate up to 4 cables (e.g., CAT6 or coaxial).

Does the WMPF1E-X come with mounting hardware?

Yes, it includes mounting screws and cable ties for easy installation.

What is the recommended installation method?

Mount the box to a flat surface using screws. Drill pilot holes if necessary. Secure cables inside using the provided ties.

Is the WMPF1E-X compatible with fiber optic cables?

Yes, it has knockouts suitable for fiber optic cables, but ensure proper bend radius is maintained.

How do I clean the WMPF1E-X?

Clean with a damp cloth and mild detergent. Do not use abrasive cleaners or solvents.

Does Panduit offer a warranty for the WMPF1E-X?

Panduit provides a 5-year warranty against defects in materials and workmanship.

USER MANUAL WMPF1E-X Panduit

The hinged cover opens from the top or the bottom. Pull flange to open and close cover.

Install the managers to the rack with the #12-24x.5 or M6 screws provided. Built-in screw retention in mounting holes secures screws in manager during installation. Install the covers to the manager by positioning cover flat against the front of the manager fingers, then push to snap in place.

Note: The recommended assembly torque shall be 9+/-1 in-lb for #12-24 screws, 1+/-0.1 N-m for M6 screws.

The PatchLink cable manager is recommended for use with Panduit 24 or 48 port patch panels mounted above and below the manager.

When routing the cables for the patch panels, either of the following two methods are recommended to help maintain cable bend radius.

METHOD 1: For each row of 24 ports, place two cables in each slot on the manager.

Route half the cables through each of the wire retainers on the ends of the manager.

METHOD 2: If the cables are coming from one side of the rack, place 2 cables in each of the slots on the manager.

NOTE: When using front and back WMPH's to manage cables on the rear of the rack, place 2 cables in each of the 12 slots in the rear of the manager, for each row of 24 ports.

METHOD 1

METHOD 2

Cable Capacity

Part Number		UTP Cable .187" dia.	SeTP Cable .250" dia.	Fiber 3mm dia.
WMP1E WMPF1E WMPH2E WMPHF2E	Method 1	96 72 312
	Method 2	72	48	192
WMPSE WMPFSE	Method 1	48 32		144
	Method 2	24	16 72
WMPLSE WMPLFSE	Method 1	32	24	96
	Method 2	16	12	48

For Worldwide Subsidiaries

and Sales Offices visit

Web Site: www.panduit.com

PANDUIT

Technical Support Phone: [phone]

Fax: [phone]

E-mail: [e-mail]