VRX2008R - Voltage regulator Tripp Lite - Free user manual and instructions

Product Type	Voltage Regulator / Line Conditioner
Model	VRX2008R
Brand	Tripp Lite
Input Voltage	120V AC
Output Voltage	120V AC ± 12% regulation
Power Capacity	2000 VA / 1800 W
Frequency	60 Hz
Outlets	8 NEMA 5-15R
Form Factor	Rackmount (2U)
Dimensions (H x W x D)	3.5 x 17.5 x 14.5 inches
Weight	25 lbs
Power Cord	6 ft, NEMA 5-15P
Surge Protection	1080 Joules
Voltage Regulation	Boost and buck (selectable taps)
Cooling	Fan cooled
Operating Temperature	32-104°F (0-40°C)
Certifications	UL, CSA
Warranty	2 years limited
Maintenance	Clean with dry cloth; do not use liquids
Safety Features	Overload protection, automatic shutdown

Frequently Asked Questions - VRX2008R Tripp Lite

How do I install the VRX2008R voltage regulator?

Place the unit in a well-ventilated area, either on a shelf or mount it in a 19-inch rack (2U). Connect the input power cord to a grounded AC outlet. Plug your devices into the 8 outlets. Ensure total load does not exceed 1800W.

What does the voltage regulation feature do?

The VRX2008R uses automatic voltage regulation (AVR) to correct undervoltage (brownouts) and overvoltage conditions. It boosts low voltages and bucks high voltages to maintain a stable 120V output, protecting connected equipment.

How many devices can I plug into this voltage regulator?

The unit has 8 NEMA 5-15R outlets. The number of devices depends on their power draw. The total load must not exceed 2000 VA (1800 W).

What is the input voltage range for normal operation?

The VRX2008R accepts input voltages from 96V to 144V. Outside this range, the regulator will disconnect or enter protection mode.

How should I clean the voltage regulator?

Unplug the unit before cleaning. Use a soft dry cloth to wipe the exterior. Do not use any liquids, sprays, or abrasive cleaners. Ensure vents remain unobstructed.

Does the VRX2008R provide battery backup?

No, this is a voltage regulator only, not an uninterruptible power supply (UPS). It conditions the power but does not provide battery backup. For battery backup, consider a Tripp Lite UPS.

What do 'boost' and 'buck' mean in voltage regulation?

Boost increases voltage when input is low (e.g., from 100V to 120V). Buck decreases voltage when input is high (e.g., from 140V to 120V). This keeps output within safe limits.

Can I mount the VRX2008R in a server rack?

Yes, it is designed for 19-inch rack mounting and occupies 2U (3.5 inches) of vertical space. Mounting hardware is included.

What should I do if the unit overloads?

The VRX2008R has overload protection. If overloaded, it will shut down or sound an alarm. Unplug some devices to reduce load below 2000 VA, then turn the unit off and on to reset.

What is the warranty on the VRX2008R?

Tripp Lite provides a 2-year limited warranty. For details, visit their website or contact support.

USER MANUAL VRX2008R Tripp Lite

Important Safety Instructions

• Install your voltage regulator indoors, away from excess moisture and heat, direct sunlight, and dust and other conductive contaminants.
- For best performance, keep the indoor temperature between 0^ircC and 40^ircC (between 32^ircF and 104^ircF ).
- Leave adequate space around all sides of the voltage regulator for proper ventilation.
- Connect your voltage regulator directly to a three-wire, grounded AC power outlet. Do not remove or modify the ground pin of the voltage regulator's plug. Do not use adapters that would eliminate the voltage regulator's connection to ground.
- Do not use extension cords between the voltage regulator and the AC outlet. If necessary, a Tripp Lite Surge Suppressor may be used between the voltage regulator and the AC outlet.
- Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

Installation

1 Connect your voltage regulator to an electrical outlet.
2 Plug your computer and electronics into your voltage regulator's outlets. NOTE: Four outlets feature Automatic Voltage Regulation (AVR) only and four outlets feature surge suppression only. Connect your computer and electronics accordingly.
3 Turn your voltage regulator's power switch on.

Fax/Modem Protection

NOTE: This connection is optional. Your voltage regulator will work properly without this connection. Using telephone cords, connect your wall jack to the voltage regulator jack marked "IN" and your equipment to the voltage regulator jack marked "OUT".

Indicator Lights

BOOST: This yellow light will turn ON whenever your voltage regulator is boosting low AC line voltage up to nominal voltage levels.

POWER: This green light will turn ON when your voltage regulator is receiving normal AC line voltage. It will blink if the system load is too high at very low voltages. Reducing loads at very low voltage levels will provide optimal AVR operation.

CUT: This red light will turn ON whenever your voltage regulator is reducing high AC line voltage down to nominal voltage levels.

Warranty Information

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two years from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way. This warranty applies only to the original purchaser who must have properly registered the product within 10 days of purchase.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marking name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA

www.tripplite.com/support

Copyright © 2010 Tripp Lite. All rights reserved.

1111 W. 35th Street, Chicago, IL 60609 USA www.tripplite.com/support