SH-S202H - DVD Burner SAMSUNG - Free user manual and instructions

Product Type	DVD Burner
Brand	Samsung
Model	SH-S202H
Interface	EIDE (40-pin, 60-pin for optimal 21X writing)
Write Speed (DVD)	21X maximum
System Requirements	Pentium IV 2.1 GHz or faster, 60-pin E-IDE cable for 21X
Automatic Balancing System	Automatic Ball Balancing System (ABS)
Supported Discs	CD, DVD, Video CD
Form Factor	Internal 5.25-inch half-height
Dimensions (Approx.)	148 x 42 x 170 mm (W x H x D)
Weight	0.75 kg
Power Supply	+5V DC, +12V DC (via internal power connector)
Safety Precautions	Place on level surface, do not drop, avoid shock
Disc Maintenance	Clean with soft cloth, do not write or attach labels
Installation	Mount in free expansion slot, connect EIDE cable and power
Accessories Included	EIDE cable, mounting screws, software (may vary)
Regulatory Compliance	FCC Part 15, CE, RoHS

Frequently Asked Questions - SH-S202H SAMSUNG

How do I install the Samsung SH-S202H DVD burner?

Insert the drive into a free 5.25-inch bay, connect the EIDE cable to the motherboard and drive, attach power cable, and secure with screws. Ensure jumper settings are correct (master/slave) if using two drives.

Why is my SH-S202H not reading discs?

Check the EIDE cable connection, power supply, and jumper settings. Try a different disc. If the drive makes unusual noises, the Automatic Ball Balancing System may be active; this is normal during spin-up/stop.

What is the maximum write speed for this drive?

The Samsung SH-S202H supports up to 21X DVD write speed. For optimal performance, use a 60-pin E-IDE cable and a Pentium IV 2.1 GHz or faster processor.

How should I clean the drive and discs?

Clean discs with a soft, lint-free cloth from center to edge. Do not use solvents or attach labels. The drive lens can be cleaned with a lens cleaning disc following manufacturer instructions.

Can I use this drive with a SATA connection?

No, the SH-S202H uses EIDE (PATA) interface. It is not compatible with SATA ports unless you use an adapter.

What should I do if the drive tray does not open?

Ensure the drive is powered on. If still stuck, use the emergency eject hole (insert a paperclip gently). Avoid forcing the tray manually.

Is the Samsung SH-S202H compatible with Windows 10?

Yes, but you may need to install compatible drivers or use built-in generic drivers. For burning software, use third-party apps as Samsung no longer provides updated utilities.

What is the Automatic Ball Balancing System?

The ABS reduces vibration and noise by automatically balancing the spindle. It may cause a whirring sound during spin-up/stop; this is normal and not a defect.

How do I set the jumper for master/slave?

The jumper is located on the back of the drive. Set to Master if it is the only device on the cable, Slave if secondary, or Cable Select for automatic detection.

Can I play Blu-ray discs on this drive?

No, the SH-S202H is a DVD burner only. It supports CD and DVD formats but not Blu-ray.

USER MANUAL SH-S202H SAMSUNG

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be detected by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Changes or modifications not expressly approved by the manufacturer responsible for

compliance could void the user's authority to operate the equipment.

LASER STANDARD IEC 80825-1:1993+A1:1997+A2:2001

WEEE

Correct Disposal

(Applicable in the European Union and other European countries with separate collection systems)

This symbol on the product or its literature indicates that it should not be disposed of with

Annex:

other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other

types of waste and recycle it responsibly to promote the sustainable reuse of material resources.

local government office, for details of where and how they can take this item for environmentally safe recycling.

Guangliyun Smart Retail Cash Register System

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial waste for disposal.

This product should not be disposed of with other commercial waste for disposal.

6

Samsung's own Eco mark helps consumers to easily understand that Samsung develops eco-friendly products. This mark represents Samsung's

continuous effort to develop eco-friendly products.

10.2.3

(Restriction of the use of certain hazardous substances in electrical and electronic equipment)

The RoHS, the environment regulation announced by the European Union, restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in electrical and electronic equipment placed on the market in the European Union after July 1, 2006.

Issu, Mercury, Caution, Nexavalent, Uromount, PBB, and PBDE in prior market in The European Union after July 1, 2006.

BG68-01449A REV.00

- http://www.samsung-ODD.com

- http://www.samsung.com

When using one EIDE cable

- Connect the cable to the SL (Slave) of the Master/Slave Select Terminal at the rear

of the DVD Writer.

— MainBoard

When using two EIDE cables

- Support the role in the NA (Master) of the MasterTime Select Terminal at the year

- Connect the cable to the MA (master) of the master/save Select Terminal at the rear of the DVT Writer

- If there is only one Optical drive: select MA (Master)

- If there are two Optical drives, select MA (Master) / SL (Slave).

Master Drive (Choose the M6 Jumper)

Safety Precautions

The following are basic precautions to ensure user safety

and reduce the risk of property damage

- When you install

Place the drive on a level

- Failure to do so may cause the

device to fall onto a hard surface

resulting in damage or malfunction

1

B

Therefore, m = 3/11

- While operating

-

- Avoid low- or high-temperature

environments.

a

Figure 1-3

D

9

Guangliyun

• Other

Other

[Non-Text]

- Do not place the drive in

direct sunlight.

(1)

(8)

[Figure]

2

1

•

Any change or modification not expre

- void your authority to operate this de ① important to read and under

important to read and understand at all times.

/e

• Avoid high-humidity environments.

• If the power cable is not connected properly, it may cause a fire or

damage the drive. Check the direction of the new passenger and the drive

of the power connector and the drive incline before connection.

(2)

① +5V DG ② Ground

@16mmol E 12VDC

0

(2) The convening and holding procedures of this shareholders' meeting

Handle with caution to prevent

handle with caution to prevent damage from external shock

damage from external shock.

, ③

(1)

(1) January 1, 2016

0

9

by designated qualified personnel could

Do not disassemble

Warning/Caution

Warning: To warn the user that

serious injury or death.

Caution: To caution the user the

damage to properly.

Do not drop the drive, and

protect it from severe shocks.

• It can damage the drive or cause

it to malfunction.

Do not move the drive while in operation and

do not attempt to open the disc tray by force.

Make sure to close all working programs before

attempting to open the tray and always use the

open/close button.

(2)

(2) 1/2 (3)

(39)

Do not insert a pin into the emergency

opening while in operation.

2.1.3.4.5.6.7.8.9.

Do not use cracked, distorted or damaged discs.

damaged discs.

1

Therefore m - 1 ≠ 0;

2.3.1

In particular, a disc with a crack on the

Inner tracks may break while in use.

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated text (underscores) where none should exist. Hence, the result is inconsistent with the Ground Truth.

Check to see that the disc does not have a crack before use. If the d

I make a copy immediately and use the copy instead. When's the eventually result in impossible damage is the disc

not use low-quality discs (i.e., illegal products, scratched or darnay

2

Installing the Drive

System Requirements

Intel Pentium 800MHz (or higher), 256 MB of RAM (or higher) with an EIDE

interface. Windows 2000/ XP/ Vista

Installing the DVD Writer

How to install the DVD Writer on your PC. First, remove the cover:

connect the cable to the DVD Writer and then to the PC.

1

to both riders of the drive

- Both sides of the drive. - You can purchase these good

- You can purchase these accessories separately from your computer dealer.

from your computer dealer. (Seeve for you: M3 X 6 X 4)

(Screws for use. M3 X 0 X 4)

1

Figure 2-1

expansion slot and install the

expansion slot and install the

illustration.

the drive in place of the

as supplied (M3X5)

result in malfunction.

^

1

Figure

[1]

DVD

Writer

Front

[1] [2] [3]

1

:

[NO TEXT]

Using the Drive/Storing and Cleaning

Your Discs

Using the DVD Writer

1 Push the power button and boot the computer.

After booting the computer, open the disc

Z compartment by pressing the Elect button

1, 2, 3, 4, 5

3 Insert the disc (CD) with the label on the disc

facing upwards and close the disc compartment

by pressing the Eject button. The indicator light

comes on

4 Play the disc (CD).

Playing CD DA/Audio CDs

A. Due to the CD drive system supplied with the sound and audio,

Windows Media Player

Playing Video CDs

Follow the instructions provided with the disc

A video card or MPEG software and a sound card need to be installed to view video CDs.

If the drive is vertically installed, you cannot use an 8 cm Mini Disc

because the disc is movable.

Storing Your Discs

6

- Do not place a disc in direct sunlight. - Store a disc vertically in a well-ventilated and

- Store a disc vertically in a well-ventilated and stable location

- Do not write or attach a label on a disc

• Do not drop a disc or place heavy objects on it.

Cleaning Your Discs

• Do not touch the surface

of a disc; hold it by the

edges.

• The disc may not function properly if there are fingerprints, foreign substances or

dust on the disc surface

7

8

Introduction

- Design and specifications are subject to change without prior notice.

3

Solving Technical Problems

Connecting the Cables to the

DVD Writer

Connecting the Cables

1 Connecting the power cable • The 4-pin power cable from the internal power unit of your computer must be connected to the power terminal on the rear of the DVD Writer.

2 Connecting the EIDE cable • Insert the EIDE cable, which is connected to the hard disk, into the interface terminal. (Please keep the red line of the cable close to Pin 1.) 3 Installing a jumper on the master/slave select terminal • Connect a jumper to the rear side of the DVD Writer. If the jumper is connected to MA (Master), it will work in Master mode. If the jumper is connected to SL (Slave), it will work in Slave mode. If the jumper is connected to CS (CSEL), you can control the device by using the host interface signal CSEL. (In general, connection to MA is recommended.)

4 Connecting the EIDE cable from a sound card • Connect the 4-pin audio cable between the sound output terminal on the DVD Writer and the audio input terminal on the sound card.

4

Technical Specifications

Category		SH-S202HTS-H52H9
DISC	Unstable Discs	DV-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D-3D - 12.0mm (120mm or 80mm)
		Interface Port	AT4/ATAM - (E-B)
		PCIe mode	PCIe Mode + 4 KBMMsec
		DMA mode	Ultra DMA Mode + 4 KBMMsec
	DC-RXWCC ROM	11ms (Random)
	DVD-ROM	15ms (Random)
	Mobile Type	1
Data transfer (nm/Max)	DV-DV-I	CAV 26X	CAV 16X
	DV-DV-RV	CAV 27X	CAV 15X
	DV-DV-DUVL	ZOLV 16X	CAV 12X
	DV-DV-DUVL	ZOLV 17X	CAV 12X
	DV-DV-DUVL	ZOLV 17X	CAV 12X
	DV-DV-RVI	CAV 28X	CAV 16X
	DV-DV-RVI	CLV 6X	CAV 12X
	DV-DV-RVI	PCAV 12X	PCAV 12X
	DV-DV-RVI (Single)		CAV 16X
	DV-DV-RVI (Multi)		CAV 16X
	CD-RI		CAV 16X
	CD-RI	PCAV 48X	CAV 40X
	IG-RIV		CAV 40X
	IG-RIV	CLV 10X	CAV 40X
	CD-RIV	CLV X	CAV 40X
Buffer Memory		2NB
Device Ingestation		Horizontal / Vertical
Operating Environment		Temperature - -47.5 °C ~ -55 °C (~+6°C)
		Humidity - 5%~ -60% (IR)
Size (Width × Height × Length)		5.83 × 1.65 × 8.69 × 14.8 × 2.2 × 4.2 × 17.0mm

The product specifications above may be changed to improve device performance without prior notice.

Combined

DVD Writer

SH-S202H(TS-H652H)

[Non-Text]

Therefore, m = 3/11

(No text)

Therefore, m = 3/11

......

Therefore, m = 3/11

......

For next

1. Of the first 12 months, the company

4

∴ m = 3/11

Disk cleaning

-

①

2

\

广力云