T 30 - Water heater Rommer - Free user manual and instructions

Product Type	Electric Water Heater
Model	T 30
Brand	Rommer
Capacity	30 liters
Power Supply	220-240V ~ 50Hz
Power Rating	1500 W
Temperature Range	30°C to 75°C
Dimensions (H x W x D)	Approx. 700 x 400 x 400 mm
Weight	Approx. 15 kg
Material	Enameled steel tank
Insulation	Polyurethane foam
Safety Features	Thermal cut-off, pressure relief valve, anti-corrosion anode
Energy Efficiency	Class B
Heating Time	Approx. 60 min from cold to 75°C
Water Connection	G 1/2 inch inlet and outlet
Installation Type	Wall-mounted, horizontal or vertical
Maintenance	Descaling every 6 months; check anode annually
Included Accessories	Safety valve, mounting brackets, user manual
Warranty	2 years manufacturer warranty

Frequently Asked Questions - T 30 Rommer

How do I install the Rommer T 30 water heater?

Installation should be performed by a qualified professional. Ensure the wall is sturdy enough to support the weight. Connect the water inlet (cold water) and outlet (hot water) using G 1/2 inch fittings. Install the provided safety valve on the cold water inlet. Connect to a 220-240V grounded power outlet. For detailed steps, refer to the user manual.

What is the capacity of the T 30 water heater?

The T 30 has a capacity of 30 liters, suitable for small households or as a supplementary water heater.

How long does it take to heat water?

Heating time depends on the starting temperature. Typically, it takes about 60 minutes to heat a full tank from 15°C to 75°C with a 1500W element.

What safety features does the T 30 have?

The water heater includes a thermal cut-off to prevent overheating, a pressure relief valve to release excess pressure, and an anti-corrosion magnesium anode to protect the tank.

How do I maintain the Rommer T 30?

Regular maintenance includes descaling every 6 months to remove limescale, checking the magnesium anode annually and replacing if worn, and ensuring the safety valve operates correctly.

What does the error code E1 mean on the display?

Error code E1 typically indicates a temperature sensor failure. Turn off the power and contact customer service. Do not attempt to repair yourself.

Can I install the water heater horizontally?

Yes, the T 30 can be installed both horizontally and vertically. Make sure the wall brackets are suited for the orientation. Follow the installation diagrams in the manual.

Is the T 30 energy efficient?

It has an energy efficiency class B rating. To save energy, set the thermostat to 50-60°C and insulate hot water pipes.

How do I adjust the temperature?

Turn the thermostat knob (usually behind a small cover) with a flathead screwdriver. The range is from 30°C to 75°C. Set it to your desired temperature.

Where can I find spare parts for the T 30?

Spare parts such as heating elements, thermostats, anodes, and valves are available from authorized Rommer dealers or online stores. Use the model number T 30 when ordering.

USER MANUAL T 30 Rommer

Line drawing of a portable water heater with a circular vent and two side knobs (no text or symbols)

Pure technical diagram of a mechanical or electrical component without any text, numbers, or symbols

Dimensions (mm)	30L	50L	80L	100L
A	100	100	100	100
B	102	120	138	138
C	505	640	765	915
D	455	590	725	875
E	200	200	200	200
F	117	122	145	145
G	200	250	300	450
H	∅355	∅390	∅440	∅440